ONORM EN 1092-2 : 1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES
10-07-2024
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Flange
3.2 DN (nominal size)
3.3 PN
3.4 Ductile iron
3.5 Grey iron
3.6 Malleable iron
3.7 Joint
4 Designation and types
4.1 Range of DN
4.2 Range of PN designations
4.3 Types of flanges
4.4 Standard designation
4.5 Information to be supplied by the purchaser
5 General requirements
5.1 Flange material
5.2 Repairs by welding
5.3 Bolting
5.4 Gaskets
5.5 Pressure/Temperature (p/T) ratings
5.6 Dimensions
5.7 Flange facings
5.8 Spot facing or back facing
5.9 Tolerances
5.10 Marking and stamping
5.11 Quality assurance
Annex A (normative) Information to be supplied by the
purchaser
Annex B (informative) Notes to tables 6 to 12
Annex C (informative) Bibliography
Tables
1 Numerical values of the surface finish parameters
(Ra and Rz) of flange jointing faces
2 Synoptic table for ductile iron flanges
3 Synoptic table for grey iron flanges
4 Synoptic table for malleable iron flanges
5 Dimensions for type B flange facings
6 Dimensions of PN 2,5 flanges
7 Dimensions of PN 6 flanges
8 Dimensions of PN 10 flanges
9 Dimensions of PN 16 flanges
10 Dimensions of PN 25 flanges
11 Dimensions of PN 40 flanges
12 Dimensions of PN 63 flanges
13 Tolerances on dimensions
14 Materials and assigned PN values
15 Pressure/temperature ratings for high strength
ductile iron flanges
16 Pressure/temperature ratings for low strength ductile
iron flanges
17 Pressure/temperature ratings for grey iron flanges
18 Pressure/temperature ratings for malleable iron
flanges
Figures
1 Types of flanges
2 Flange facing types A and B
3 Dimensions of PN 2,5 flanges
4 Dimensions of PN 6 flanges
5 Dimensions of PN 10 flanges
6 Dimensions of PN 16 flanges
7 Dimensions of PN 25 flanges
8 Dimensions of PN 40 flanges
9 Dimensions of PN 63 flanges
Defines requirements for circular flanges made from ductile, grey and malleable cast iron for DN 10 to DN 4000 and PN 2,5 to PN 63. Defines flange type and facings, dimensions and tolerances, bolt sizes, surface finishes of jointing faces, marking, testing quality assurance and materials in addition to associated pressure/temperature (p/T) ratings.
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 1092-2:1998 | Identical |
| NS EN 1092-2 : 1ED 1997 | Identical |
| NBN EN 1092-2 : 1997 | Identical |
| EN 1092-2:1997 | Identical |
| BS EN 1092-2:1997 | Identical |
| NEN EN 1092-2 : 1997 | Identical |
| UNI EN 1092-2 : 1999 | Identical |
| NF EN 1092-2 : 1997 | Identical |
| I.S. EN 1092-2:1997 | Identical |
| SN EN 1092-2 : 1997 | Identical |
| DIN EN 1092-2:1997-06 | Identical |
| ONORM EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| ONORM EN 15502-1 : 2015 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| ONORM EN 14382 : AUG 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| ONORM EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.