ONORM EN 1264-4 : 2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
Withdrawn date
01-08-2021
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
4.1 General structural preconditions
4.2 Building layers, building components
4.2.1 Supporting base
4.2.2 Insulating layers, perimeter insulating strip
4.2.3 Protection layer
4.2.4 Equipment
4.2.5 Piping (pipes and couplings)
4.2.6 Installation of piping
4.2.7 Attachment of pipes
4.2.8 Screeds (Load distribution layer)
4.3 Leak test
4.4 Initial heating up
4.5 Floor coverings
Annex A (informative) Oxygen barrier layer
Specifies uniform requirements for the design and the construction of heated floor structures to ensure that the underfloor heating system is suited to the particular application.
| Committee |
TC-058
|
| DevelopmentNote |
Supersedes ONORM EN 15377-2. (10/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNI EN 1264-4 : 2009 | Identical |
| I.S. EN 1264-4:2009 | Identical |
| EN 1264-4:2009 | Identical |
| UNE-EN 1264-4:2010 | Identical |
| DIN EN 1264-4:2009-11 | Identical |
| BS EN 1264-4:2009 | Identical |
| NBN EN 1264-4 : 2010 | Identical |
| NS EN 1264-4 : 2009 | Identical |
| NEN EN 1264-4 : 2009 | Identical |
| SN EN 1264-4 : 2009 | Identical |
| NF EN 1264-4 : 2010 | Identical |
| ONORM EN 1264-3 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 3: DIMENSIONING |
| OVE/ONORM EN 50559 : 2014 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
| ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings |
| ONORM EN ISO 21003-5 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ONORM EN ISO 15877-2 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
| ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system |
| ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General |
| DIN 4724:2001-04 | PLASTIC PIPING SYSTEMS FOR WARM WATER FLOOR HEATING SYSTEMS AND RADIATOR PIPE CONNECTING - CROSSLINKED POLYETHYLENE OF MEDIUM DENSITY (PE-MDX) |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| ISO 22391-5:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system |
| ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
| ONORM EN ISO 15874-3 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS (ISO 15874-3:2013) |
| ONORM EN ISO 15874-5 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15874-5:2013) |
| ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes |
| ONORM EN ISO 15874-1 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013) |
| ONORM EN ISO 15877-5 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ONORM EN 1264-2 : 2013 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| ISO 15877-5:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system |
| ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes |
| ONORM EN ISO 15874-2 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES (ISO 15874-2:2013) |
| ONORM EN ISO 21003-1 : 2012 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008) |
| ONORM EN ISO 15877-1 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| ONORM EN ISO 21003-2 : 2011 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES (ISO 21003-2:2008 + AMD 1:2011) |
| ONORM EN ISO 15875-2 : 2008 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES |
| ONORM EN ISO 15875-1 : 2008 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 1: GENERAL |
| ISO 21003-2:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes |
| ISO 10508:2006 | Plastics piping systems for hot and cold water installations — Guidance for classification and design |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
| ISO 22391-3:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings |
| ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
| ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
| ONORM EN ISO 15875-5 : 2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General |
| ISO 15874-5:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system |
| ONORM EN ISO 15877-3 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
| ONORM EN ISO 15875-3 : 2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 3: FITTINGS |
| ONORM EN ISO 21003-3 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS |
| ONORM EN 1264-1 : 2011 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 1: DEFINITIONS AND SYMBOLS |
| ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.