PD 6534:1993
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Guide to the use in the UK of DD ENV 206:1992. Concrete. Performance, production, placing and compliance criteria
Hardcopy , PDF
01-02-2007
English
15-03-1993
Committees responsible
Foreword
Guide
1. General
2. References
3. Definitions
4. Constituent materials
5. Basic requirements for concrete composition
6. Requirements for durability
7. Concrete properties and methods of verification
8. Specification of concrete
9. Production of concrete
10. Transport, placing and curing of fresh concrete
11. Quality control procedures
Annexes
A. (informative) Text of EN(V) 197-1 (June 1988 draft)
Cement - Composition, specifications and conformity
criteria - Part 1 Definitions and composition
B. (informative) Text of EN(V) 197-2 (June 1988 draft)
Cement - Composition, specifications and conformity
criteria - Part 2 Specifications
C. (informative) Text of ISO/DP 9690 Production and
control of concrete - Classification of environmental
exposure conditions for concrete and reinforced
concrete structures
D. (informative) Sulfate attack on concrete
E. (informative) Text of RILEM Recommendation CPC No.7
(November 1975) Direct tension
F. (informative) Text of ISO/DIS 7031 Concrete,
hardened - Determination of the depth of penetration
of water under pressure
Tables
1. Relationship between normative references and
corresponding British Standards
II. Relationship between optional references and
corresponding British Standards
III. Method of compaction of test specimens
IV. UK national strength grades
V. A comparison of withdrawn and current British
Standard specifications for cement
VI. Strength grades of concrete related to water/cement
ratio
A.1 Cement types and compositions
B.1 Mechanical and physical requirements
B.2 Chemical requirements
C.1 Classification of exposure conditions with respect
to concrete
C.2 Classification of exposure conditions with respect
to reinforcement
CA.1 Classification of chemical aggressiveness conditions
CA.2 Groups of gases of the same aggressiveness degree
according to their type and concentration
CA.3 Aggressiveness classes for groups of gases with
concentrations according to table CA.2
CA.4 Aggressiveness classes of liquid media (aqueous
solutions) according to the concentration of
aggressive substances
CA.5 Aggressiveness classes for solid media
CA.6 Aggressiveness classes for liquid media
CB.1 Temperature classes
CB.2 Frost classes
CB.3 Humidity classes
Figures
D.1 Comparison between ISO and British Standard sulfate
aggressivity classes for groundwater
D.2 Comparison between ISO and British Standard sulfate
aggressivity classes for soil
F.1 Example of test arrangement
List of references
Provides advice on the use of the European Prestandard specification for the production of concrete.
Committee |
B/517/1
|
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
British Standards Institution
|
Status |
Withdrawn
|
EN 196-21 : 1989 | METHODS OF TESTING CEMENT - DETERMINATION OF THE CHLORIDE, CARBON DIOXIDE AND ALKALI CONTENT OF CEMENT |
ISO 4110:1979 | Fresh concrete — Determination of the consistency — Vebe test |
ISO 6276:1982 | Concrete, compacted fresh Determination of density |
BS 3892-2:1984 | Pulverized-fuel ash Specification for pulverized-fuel ash for use in grouts and for miscellaneous uses in concrete |
EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
BS 1881-101:1983 | Testing concrete Method of sampling fresh concrete on site |
ISO 4109:1980 | Fresh concrete — Determination of the consistency — Slump test |
EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
ISO 4111:1979 | Fresh concrete — Determination of consistency — Degree of compactibility (Compaction index) |
BS 1881-111:1983 | Testing concrete Method of normal curing of test specimens (20°C method) |
BS 1881-116:1983 | Testing concrete Method for determination of compressive strength of concrete cubes |
BS 1881-120:1983 | Testing concrete Method for determination of the compressive strength of concrete cores |
BS 6100-6.3:1984 | Glossary of building and civil engineering terms. Concrete and plaster Aggregates |
EN 196-5:2011 | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
ENV 206 : 1990 | CONCRETE - PERFORMANCE, PRODUCTION, PLACING AND COMPLIANCE CRITERIA |
BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
BS 1881-207:1992 | Testing concrete Recommendations for the assessment of concrete strength by near-to-surface tests |
BS 8000-2.2:1990 | Workmanship on building sites. Code of practice for concrete work Sitework with in situ and precast concrete |
BS 1881-104:1983 | Testing concrete Method for determination of Vebe time |
BS 1881-102:1983 | Testing concrete Method for determination of slump |
BS 7514:1989 | General criteria for suppliers\' declaration of conformity |
BS 1014:1975 | Specification for pigments for Portland cement and Portland cement products |
ISO 4103:1979 | Concrete — Classification of consistency |
ISO 2736-2:1986 | Concrete tests Test specimens Part 2: Making and curing of test specimens for strength tests |
ISO 4848:1980 | Concrete Determination of air content of freshly mixed concrete Pressure method |
BS 1881-107:1983 | Testing concrete Method for determination of density of compacted fresh concrete |
EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
BS 1881-106:1983 | Testing concrete Methods for determination of air content of fresh concrete |
BS 1881-108:1983 | Testing concrete Method for making test cubes from fresh concrete |
BS 8204-2:1987 | Screeds, bases and in-situ floorings Code of practice for concrete wearing surfaces |
ISO 4108:1980 | Concrete — Determination of tensile splitting strength of test specimens |
BS DD92(1984) : 1984 | METHOD FOR TEMPERATURE MATCHED CURING OF CONCRETE SPECIMENS' |
BS 8110-1:1985 | Structural use of concrete Code of practice for design and construction |
BS 5328-4:1990 | Concrete Specification for the procedures to be used in sampling, testing and assessing compliance of concrete |
BS 1881-125:1986 | Testing concrete Methods for mixing and sampling fresh concrete in the laboratory |
ISO 2736-1:1986 | Concrete tests Test specimens Part 1: Sampling of fresh concrete |
BS 7511:1989 | General criteria for certification bodies operating product certification |
BS 812-2:1975 | Testing aggregates Methods for determination of physical properties |
BS 8103-1:1986 | Structural design of low-rise buildings Code of practice for stability, site investigation, foundations and ground floor slabs for housing |
BS 5328-3:1990 | Concrete Specification for the procedures to be used in producing and transporting concrete |
ISO 6783:1982 | Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method |
BS 1881-117:1983 | Testing concrete Method for determination of tensile splitting strength |
BS 1881-109:1983 | Testing concrete Method for making test beams from fresh concrete |
ISO 4012:1978 | Concrete — Determination of compressive strength of test specimens |
BS 5328-1:1991 | Concrete Guide to specifying concrete |
BS 1881-202:1986 | Testing concrete Recommendations for surface hardness testing by rebound hammer |
BS 1881-103:1983 | Testing concrete Method for determination of compacting factor |
ISO 7033:1987 | Fine and coarse aggregates for concrete Determination of the particle mass-per-volume and water absorption Pycnometer method |
BS 1881-110:1983 | Testing concrete Method for making test cylinders from fresh concrete |
BS 3892-1:1982 | Pulverized-fuel ash Specification for pulverized-fuel ash for use as a cementitious component in structural concrete |
BS 1881-118:1983 | Testing concrete Method for determination of flexural strength |
EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
ISO 1920:1976 | Concrete tests Dimensions, tolerances and applicability of test specimens |
BS 5502-0:1992 | Buildings and structures for agriculture Introduction |
BS 882:1983 | Specification for aggregates from natural sources for concrete |
ENV 1992-1-1 : DRAFT 91 COR 1992 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS |
BS 1881-203:1986 | Testing concrete Recommendations for measurement of velocity of ultrasonic pulses in concrete |
BS DD83(1983) : 1983 | ASSESSMENT OF THE COMPOSITION OF FRESH CONCRETE |
BS 6610:1991 | Specification for Pozzolanic pulverized-fuel ash cement |
ISO 6782:1982 | Aggregates for concrete Determination of bulk density |
BS 1881-105:1984 | Testing concrete Method for determination of flow |
ISO 4013:1978 | Concrete — Determination of flexural strength of test specimens |
BS 146:1947 | Specification for Portland blastfurnace cement |
BS 6089:1981 | Guide to assessment of concrete strength in existing structures |
ISO 6275:1982 | Concrete, hardened Determination of density |
BS 1881-114:1983 | Testing concrete Methods for determination of density of hardened concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.