PPP-B-640 Revision D:1966
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL
Available format(s)
PDF
Superseded date
25-10-1994
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Covers the requirements for new fiberboard boxes for domestic and overseas shipment.
| Committee |
FSC 8115
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| MIL-C-47224 Revision B:1993 | COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
| O-F-499 Revision D:1985 | FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT) |
| AA-B-260 Revision F:1975 | BEDSPRING, BOX TYPE |
| MIL-S-52541 Base Document:1966 | SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| DDD-C-001799 Base Document:1972 | CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-B-20179 Revision E:1992 | BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK |
| MIL-P-24377 Revision A:1982 | PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL-C-10479 Revision B:1969 | CRYSTAL IMPEDANCE METER TS 683/TSM |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MMM-A-1617 Revision B:1995 | ADHESIVE RUBBER BASE GENERAL PURPOSE |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| DOD-B-24559 Base Document:1977 | BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC) |
| MIL-L-52056 Revision D:1984 | LIGHT, SIGNAL, SURVEYING: SELF ILLUMINATED WITH CARRYING CAEM FOR USE WITH RANGE POLE |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| PPP-P-001938 Base Document:1976 | PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED |
| MIL-P-25621 Revision B:1974 | PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| L-F-475 Revision A:1965 | FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING |
| GGG-B-0060 Revision A Interim Revision:1966 | BAG, TOOL SATCHEL |
| GGG-L-001345 Base Document:1967 | LEAD JOINT RUNNER |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| DDD-C-001023 Base Document:1966 | CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER) |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| TT-L-50 Revision G:1976 | LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS) |
| MIL-R-12540 Revision B:1967 | RECTIFIER, METALLIC RA-91 |
| MIL-P-18324 Revision D:1964 | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| MIL-A-12636 Revision B:1969 | ANALYZER ZM-3/U |
| AA-W-001950 Base Document:1975 | WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME |
| MIL L 43432 : A | LEATHER, PACKAGING AND PACKING OF |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| ASTM F 1348/F1348M : 1991 : R2007 | Standard Specification for Pneumatic Rotary Descaling Machines |
| SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL E 75 : H | ELECTRON TUBES PACKING OF |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL-B-40028 Revision B:1976 | BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS |
| SS-C-466 Revision E:1964 | CLOTH, THREAD, AND TAPE-ASBESTOS |
| GG M 181 : D | MEASURER, MAP |
| MIL-A-23054 Revision A:1982 | ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED |
| MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER, (UNDERGROUND CONNECTED) |
| L-F-001641 Base Document:1971 | FLOOR COVERING TRANSLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL P 81997 : B | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-G-29170 Revision B:1988 | GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| DOD-C-24556 Base Document:1977 | CURTAIN, TRACK AND SUSPENSION SYSTEM, BERTH (SHIPBOARD USE) (METRIC) |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| MIL S 3470 : D | SPLINE AND WEIGHTS SET |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| KK-B-151 Revision H:1977 | BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-C-3133 Revision C:1976 | CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
| TT-P-641 Revision G:1976 | PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
| MIL-C-7438 Revision G:1985 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| SAE AS 85848 : 2017 | SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| AA-C-2859 Base Document:1994 | CABINET, SECURITY, WEAPONS STORAGE |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| AA-F-363 Revision C:1990 | FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MIL-C-55442 Revision B:1985 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY |
| J-C-30 Revision B:1989 | CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) |
| MIL-B-36488 Base Document:1966 | BOOTH, AUDIOMETRIC EXAMINATION |
| MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
| MIL-P-71012 Revision A:1994 | PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11 |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| MIL-B-13831 Revision J:1985 | BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL) |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL C 46747 : NOTICE 1 | CARRIER, CARGO, AMPHIBIOUS, M116 AND M116E1, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| MIL-G-25507 Revision B:1991 | Gage, Pressure, Dial Indication, Oxygen 0-2000 PSI, Type MF-2 |
| PPP-P-1136 Revision D:1986 | PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS |
| TT-L-47 Revision C:1976 | LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER |
| MIL-R-23461 Revision A:1987 | RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING |
| MIL-A-3816 Revision F:1992 | ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK |
| RR-P-1352 Revision C:1989 | PARTITION, TOILET, COMPLETE |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62mm: M60E3 |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| PPP-P-1133 Revision C:1983 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-T-52332 Revision B:1991 | TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL P 16685 : D | PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE) |
| MIL-L-24518 Base Document:1975 | LAMINATE, VINYL FILM ALUMINUM, DECORATIVE |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL-P-22968 Revision B:1984 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL-F-45687 Base Document:1961 | FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| L-L-330 Revision B:1974 | LINER, PLASTIC, WASTE RECEPTACLE |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL J 2829 : E | JOINT SEALING PACKING |
| MIL-B-23958 Revision A:1967 | BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING |
| PPP-P-1937 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL L 3890 : A | LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC] |
| MIL-C-11020 Revision B:1966 | CHESTS AND CASES, METAL, GENERAL SPECIFICATION FOR |
| MIL-C-55416 Base Document:1965 | CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF) |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| DDD-C-001630 Base Document:1973 | CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| FED-STD-803 Base Document:1991 | PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| MIL-H-1679 Revision F:1992 | HOOK, TENT; WITH THIMBLE, FOR GUY LINE, ASSEMBLY TENT |
| TT-P-605 Revision B:1976 | PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| MIL-H-9850 Revision C:1977 | HINGE, BUTT, CONTINUOUS, PIANO |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-STD-1187 Base Document:1976 | STANDARD SIZE UNIT, INTERMEDIATE AND EXTERIOR CONTAINERS FOR MODULAR PACKAGING AND UNITIZATION ON THE 40 INCH PALLET |
| MIL-STD-649 Revision C:1976 | ALUMINUM AND MAGNESIUM PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
| MIL-P-83927 Revision B:1981 | Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037 |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| SAE MA 2151 : 2015 | CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| MIL-A-52435 Revision D:1984 | AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| MIL-C-55508 Base Document:1966 | COIL ASSEMBLY, TELEPHONE LOADING CU-260( ) /G |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MMM-A-250 Revision C:1975 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| PPP-P-1134 Revision D:1983 | PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| GGG-B-351 Revision B:1963 | BIN, STORAGE AND DISPLAY, ROTARY |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| MIL C 2486 : C | CABLE, SPECIAL PURPOSE, ELECTRICAL WM-46/U |
| MIL-M-55336 Base Document:1971 | MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF) |
| PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
| MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
| MIL-H-9890 Revision E:1988 | HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL-B-12233 Revision E:1986 | BAGS, SAND, BURLAP & COTTON |
| MIL-P-14232 Revision E:1976 | PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| HH-I-435 Revision B:1977 | INSULATORS, ELECTRIC, PORCELAIN AND GLASS |
| MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
| MIL-R-16417 Revision J:1986 | REPAIR KIT, CO2, INFLATABLE LIFE PRESERVERS |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-I-46852 Revision C:1991 | INSULATION TAPE, ELECTRICAL, SELF ADHERING UNSUPPORTED SILICONE RUBBER |
| MIL-PRF-900 Revision F:1973 | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL E 55585 : F | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| FF C 00431 : B | CLIP, PAPER (BINDER) |
| PPP-P-1875 Base Document:1975 | PREPARATION FOR DELIVERY REQUIREMENTS FOR CHAIRS, METAL AND PLASTIC, OFFICE |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL-G-24717 Base Document:1989 | GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
| MIL-L-52696 Base Document:1970 | LAMINATING RESIN |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| HH-I-521 Revision F:1980 | INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES) |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) |
| JJ-S-750 Revision A:1967 | STRAP, WEBBING |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| DOD-P-15817 Revision D:1976 | PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC) |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-T-81914 Base Document:1973 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL-B-23306 Revision B:1985 | BINOCULAR, SHIP, 20-POWER AND ACCESSORIES |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| MIL-T-55659 Base Document:1971 | TEST FACILITIES KIT, MK-994()/AR (UNITS OF) |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL-I-17214 Revision B:1984 | INDICATOR, PERMEABILITY, LOW-MU (GO-NO-GO) |
| MIL-B-12841 Revision B:1970 | BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| MIL-B-24222 Revision A:1978 | BAGS , STORAGE, MASK, AIR LINE |
| MIL R 196 : C | REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF |
| MIL-D-55456 Revision B:1969 | Distribution Box, J-1077( )/U Distribution Box, J-2317( )/U |
| MIL C 62327 : A NOTICE 1 | CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF |
| PPP-C-843 Revision D:1977 | CUSHIONING MATERIAL, CELLULOSIC |
| MIL-I-50711 Base Document:1970 | IRON BASE SINTERED METAL BARS (OIL PREGNATED) |
| MIL C 19328 : E | CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A |
| SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| PPP-P-001944 Base Document:1976 | PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| PPP-B-1980 Base Document:1977 | BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF |
| MIL-G-21032 Revision D:1972 | GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5 |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| MIL-P-6063 Revision B:1978 | PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR |
| MIL-C-3993 Revision C:1962 | COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF |
| MIL T 4 : L | TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| MIL-B-2766 Revision C:1987 | BATTING, FIBROUS GLASS, LIFESAVING EQUIPMENT |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL L 61002 : 0 | LABELS, PRESSURE-SENSITIVE ADHESIVE, FOR BAR CODES AND OTHER MARKINGS |
| L-P-393 Revision A:1964 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL-T-47023 Base Document:1974 | TAPE, HEAT SHRINKABLE |
| MIL W 43334 : B | WEBBING AND TAPE, TEXTILE, PACKAGING AND PACKING OF |
| MMM-A-187 Revision B:1968 | ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL-C-52669 Base Document:1969 | COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL-H-21722 Revision B:1992 | HOOK, THRUST STABILIZING, JATO-45OO POUNDS NOMINAL THRUST |
| SS-T-312 Revision B:1974 | TILE, FLOOR, ASPHALT, RUBBER, VINYL, VINYL-ASBESTOS |
| MIL-B-3743 Revision D:1967 | BRUSH, ELECTRICAL CONTACT |
| MIL-T-12756 Revision A:1959 | TEST SET, BATTERY TESTER TS-183()/U |
| MIL C 1213 : E | CUPS, GREASE |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-R-12499 Revision C:1967 | REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| HH-P-46 Revision E:1975 | PACKING; ASBESTOS, SHEET, COMPRESSED |
| DD-G-1403 Revision C:1983 | GLASS, FLOAT, SHEET, FIGURED, COATED (HEAT-STRENGTHENED AND TEMPERED) |
| MMM-A-185 Revision B:1974 | ADHESIVE RUBBER (FOR PAPER BONDING) |
| RR-K-795 Revision A:1974 | KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| GG-O-635 Revision A:1977 | OPTICAL FLATS |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MIL-W-80 Revision C:1966 | WINDOW OBSERVATION ACRYLIC BASE ANTIELECTROSTATIC TRANSPARENT (FOR INDICATING INSTRUMENT) |
| FF-P-00416 Revision F:1971 | PIN, SAFETY |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS |
| MIL-C-24224 Revision B:1985 | Cartridge, Gas Pressure, for Pressurizing Dry Chemical Fire Extinguishers |
| HH-I-525 Revision A:1968 | INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B) |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-S-24660 Base Document:1985 | Sprinkler Head, 180 Degrees Full Cone |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| MIL-I-23264 Revision A:1968 | Insulators, Ceramic, Electrical and Electronic, General Specification for |
| MIL-B-43666 Revision D:1986 | BOXES, SHIPPING, CONSOLIDATION |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| MIL-T-55335 Base Document:1971 | Test Facilities Kit, MK-1191( )/AR (Units of) (No S/S Document) |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| MIL-T-12333 Revision C:1969 | TEST SET, CRYSTAL UNIT, QUARTZ TS-710/TSM |
| HH-I-545 Revision B:1971 | INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL) |
| FED-STD-224 Revision A:1972 | CLOSING, SEALING AND REINFORCING OF FIBERBOARD SHIPPING CONTAINER, GENERAL METHOD FOR (INTERIM) |
| MIL-A-28879 Revision A:1985 | ANTENNA ASSEMBLY, BUOYANT CABLE AS-2629B/BRR |
| MIL-B-45977 Revision B:1990 | BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| MIL-T-0012756 Revision B:1969 | TEST SET, BATTERY (BATTERY TESTER TS 183 () U) |
| MIL-S-13282 Revision B:1973 | SILVER AND SILVER ALLOYS |
| MIL D 5480 : F | DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| MIL-I-695 Revision B:1969 | INSULATION, ELECTRICAL, PAPER [SLOT CELL] |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
| ZZ-C-730 Revision A:1973 | CUPS AND GLIDES, FURNITURE |
| MIL B 197 : F INT AMD 2 | BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF |
| MIL-G-1086 Revision E:1975 | GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS] |
| LLL-S-720 Revision A:1974 | STIRRING STICK, BEVERAGE (WOOD) |
| MIL M 3996 : C | MATTRESSES (EXCEPT PNEUMATIC TYPE), PACKAGING AND PACKING OF |
| MIL-D-45503 Revision A:1961 | DRIVE, HYDRAULIC, T46 |
| MIL-M-55564 Base Document:1969 | MAINTENANCE KIT, ELECTRONIC EQUIPMENT MK-1035/ARC-131 ( ) (UNITS OF) |
| AA-C-00288 Revision B:1968 | CHAIRS, FOLDING, WOOD, WITHOUT ARMS |
| MIL-P-24396 Revision A:1994 | PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE) |
| HH-P-119 Revision A:1967 | PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER |
| GG-C-00716 Revision C:1990 | CRUTCH, ADJUSTABLE, WOOD |
| MIL-P-52455 Revision A:1970 | PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL-C-13294 Revision C:1966 | CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PARI, WIRE WD-1/TT AND WD-14/TT |
| HH-P-41 Revision D:1986 | PACKING, ASBESTOS, ROPE AND WICK |
| MIL-A-24456 Base Document:1971 | ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MIL-C-55532 Revision A:1969 | CHARGER, BATTERY PP-1600 ( ) /G |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-I-55538 Base Document:1968 | INFLATION LAUNCHING DEVICE, BALLOON, METEOROLOGICAL ML-594( )/U |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL-P-15877 Revision D:1973 | PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) |
| L F 00334 : E | FILM, PHOTOGRAPHIC, ROLL, MICROFILM (BLACK AND WHITE) |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL-A-52363 Revision C:1991 | AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE) |
| GGG-P-00770 Revision A Interim Revision:1967 | PULLER, FUSE, (S-SHAPE) |
| MIL-B-15228 Revision G:1988 | BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL L 3572 : A | LUBRICANT, COLLOIDAL GRAPHITE IN OIL |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| HH-B-100 Revision B:1973 | BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| ASTM F 1348/F1348M : 1991 : R2002 | Standard Specification for Pneumatic Rotary Descaling Machines |
| SAE AMS P 22968 : 2016 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL-T-55655 Revision A:1972 | TEST FACILITIES KIT MK-980 ( ) /PPS-5 |
| MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| PPP-H-1581 Revision A:1977 | HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF |
| AA-W-001791 Revision A:1973 | WARDROBE AND JANITOR'S CLOSET, WOOD, STEEL FRAME |
| MIL-B-38721 Revision B:1980 | BOXES, CONSOLIDATION, FIBERBOARD AND POLYOLEFIN |
| PPP-P-600 Revision G:1992 | PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| DOD K 24674 : 0 | KIT, DISSOLVED OXYGEN (METHOD C), NAVAL SHIPBOARD, (METRIC) |
| H B 00621 : G | BRUSH, STENCIL |
| MIL R 900 : F | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-G-20241 Revision D:1980 | GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-A-8576 Revision C:1984 | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| DOD-T-46151 Revision A:1979 | TAPE,ADHESIVE, RUBBER (METRIC) |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| MIL-L-741 Revision D:1984 | LEAD, ELECTRICAL, ARC WELDING |
| MIL T 49136 : 0 | TEST SET, COUNTERMEASURES SET AN/ALM-178(( |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL V 9439 : D | VALVE, OXYGEN, CYLINDER, HIGH PRESSURE |
| MIL-I-43684 Revision B:1989 | INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER |
| MIL-B-36560 Revision A:1975 | BASSINET AND PRESSING TABLE COMBINATION, HOSPITAL |
| MIL S 18313 : G | SLINGS, CARGO, NET, NYLON WEBBING |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| UU-P-272 Revision C:1972 | PAPER, WRAPPING, FREEZER (POLYETHYLENE COATED) |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
| PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
| L-F-333 Revision A:1974 | FILM, PHOTOGRAPHIC, MOTION PICTURE (BLACK AND WHITE) |
| PPP-F-00320 Revision E:1991 | FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE) AND CUT SHAPES |
| MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| MIL-H-21660 Revision A:1992 | HOOK, THRUST, JATO - 1000 POUNDS NOMINAL THRUST |
| MIL-T-55570 Base Document:1967 | TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF) |
| MIL B 17896 : C | |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| MIL-C-14518 Revision E:1992 | CONNECTOR, BRIDLE LINE: SHEAVE TYPE |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| AA-D-001918 Base Document:1975 | DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-W-45562 Revision C:1992 | WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF |
| MIL-P-49115 Revision A:1977 | PLATOON EARLY WARNING SYSTEM AN/TRS-2() |
| MIL S 24656 : 0 | |
| MIL-B-3865 Revision D:1990 | BLOCKS, ROPE, TACKLE: PACKAGING OF |
| L E 00530 : B | ENVELOPE, TRANSPARENT |
| MIL-T-10767 Revision F:1968 | TOWER (COMPONENTS OF) |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL S 3405 : B | SURVEYING SET PLANETABLE, SET 8 PACKAGING OF |
| MMM-A-105 Base Document:1967 | ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE |
| PPP-B-665 Revision D:1972 | BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS |
| SS J 570 : B NOTICE 1 | JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION) |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL-V-18318 Revision B:1966 | VALVE, PRESSURE REGULATING, OXYGEN SYSTEM |
| AA-S-00300 Revision A Interim Revision:1967 | SHELF, FILING |
| MIL-C-10085 Revision E:1977 | CUTTERS, PHOTOGRAMMETRIC, SLOTTED-TEMPLATE: HAND-OPERATED |
| MIL L 25370 : E | LIFE PRESERVER INFLATING ASSEMBLY, MA-1 |
| MIL-A-55147 Revision B:1970 | AMPLIFIER-POWER SUPPLY GROUP OA-3633()/GRC |
| PPP-P-1877 Revision A:1977 | PACKAGING AND PACKING OF WOOD OFFICE FURNITURE |
| GGG-H-00110 Base Document:0196 | HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE) |
| MIL-I-2925 Revision B:1967 | INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE |
| LLL-F-00550 Base Document:1964 | FORK AND SPOON, PICNIC (WOOD) |
| DDD-C-001559 Base Document:1969 | CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING |
| UU B 43 : D NOTICE 1 | BAG, PAPER, WASTE-RECEPTACLE |
| MIL P 2693 : C | PACKING MATERIAL, COLD STORAGE DOOR GASKETING, NONWATERTIGHT |
| MIL-T-2487 Revision B:1975 | TEST SET, TS&27()-TSM |
| SS-C-266 Revision F:1973 | CHALK, MARKING, WHITE AND COLORED |
| MIL-L-52413 Revision B:1990 | LIFE PRESERVER, YOKE, ORAL INFLATION, TRAPPED AIR TYPE, DESIGN 9008 |
| MIL-A-14053 Revision C:1977 | Antenna AT-450( )/ARC |
| GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL-F-26862 Revision B:1970 | FIBERBOARD, SOLID, NON-CORROSIVE, FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS |
| MIL-A-55368 Base Document:1972 | AIRBORNE DATA ANNOTATION SYSTEM AN/AYA-10() |
| MIL B 81391 : NOTICE 1 | BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING |
| MIL S 55507 : E (2) | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT), PACKAGING OF |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-R-17729 Revision C:1972 | RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN |
| HH-G-76 Revision C:1970 | GASKET, ASBESTOS METALLIC CLOTH |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| GG-D-1958 Base Document:1975 | DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED) |
| MIL-R-8791 Revision D:1982 | RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN |
| L-P-1221 Revision A:1971 | PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN) |
| AA-S-130 Revision B:1991 | SCREENS, BEDSIDE, ALUMINUM |
| UU-B-340 Revision A:1973 | BINDER, LOOSE LEAF, FLEXIBLE PRONG |
| MIL-P-14313 Revision D:1972 | PISTOL AND REVOLVERS, PACKAGING OF |
| FF-T-1813 Base Document:1973 | TACK |
| MIL-P-19152 Revision A:1974 | PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS) |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-P-40619 Revision B:1991 | PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) |
| MIL-C-44009 Revision A:1982 | CHARGER, BATTERY, PP-7562/U |
| PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
| PPP-P-0015 Revision D:1970 | PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL |
| MIL-P-12808 Revision F:1991 | PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| DOD P 24583 : (1) | PACKING MATERIAL, GRAPHITIC, BRAIDED YARN (METRIC) |
| MIL-T-49117 Base Document:1977 | TEST SET, RECEIVER TS-3565( )/TRS-2 |
| MIL-T-49110 Base Document:1977 | TELEPHONE SET TA-838 ()/TT |
| MIL-C-49085 Base Document:1976 | CHARGER, BATTERY PP-7311/PAS-7 |
| MIL M 17191 : D | MOUNT, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
| MIL-T-55369 Base Document:1972 | TEST SET, RADIO TS-1588 ( ) /AC |
| MIL-B-2424 Revision D:1983 | BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE |
| L-P-511 Base Document:1964 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| L-T-776 Revision A:1966 | TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) |
| GG-P-725 Revision B:1978 | |
| MIL-P-20628 Revision B:1971 | PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS) |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
| MIL-B-208 Revision D:1970 | BATTERY, STORAGE, LEAD ACID, AUTOMOTIVE AND NAVY PORTABLE (EXCEPT AIRCRAFT), PACKAGING AND PACKING OF |
| MIL-R-24169 Revision B:1982 | REGULATOR, AIR DEMAND, SINGLE HOSE, DIVER 5 |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL-B-30510 Revision B:1983 | BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK |
| PPP P 001946 : NOTICE 1 | PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE |
| MIL R 2765 : D | RUBBER SHEET, STRIP, EXTRUDED AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT |
| MIL-C-50709 Base Document:1971 | COPPER BASE SINTERED BARS (OIL PREGNATED) |
| KKK-T-728 Revision A:1973 | TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY |
| MIL-S-2244 Revision A:1967 | SLEEVE, WIRE SPLICING, SINGLE TUBE, GENERAL SPECIFICATION FOR |
| MIL-R-52002 Revision A:1971 | RACK ASSEMBLY, CONE, AIRPORT MARKER LIGHT |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) |
| GG-E-651 Revision C:1975 | ERASER, BLACKBOARD |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION |
| MIL G 18498 : C | GLASS SET, WATER GAGE, FLAT, PLAIN. HIGH PRESSURE STEAM (GLASS, MICA SHIELD, SPACERS, & GASKETS) |
| FF-T-791 Revision B:1967 | TURNBUCKLE |
| MIL-C-538 Revision F:1975 | COMPARATOR, COLOR |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL-I-25135 Revision E:1984 | INSPECTION MATERIALS, PENETRANTS |
| MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
| SAE MA 2150 : 2015 | CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC |
| L-P-394 Revision B:1968 | PLASTIC MOLDING MATERIAL (PROPYLENE PLASTICS, INJECTION AND EXTRUSION) |
| MIL-C-58104 Revision A:1983 | COVER, PROTECTIVE FOR PARTS AND EQUIPMENT |
| SAE AS 13572 : 2014 | SPRINGS, HELICAL, COMPRESSION AND EXTENSION |
| ASTM F 1348/F1348M : 1991 : R2013 | Standard Specification for Pneumatic Rotary Descaling Machines |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.