PREN 10025-2 : DRAFT 2011

Current

Current The latest, up-to-date edition.

HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS

Available format(s):

Language(s):

Published date: 12-01-2013

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing process
7 Requirements
8 Inspection
9 Preparation of samples and test pieces
10 Test methods
11 Marking, labelling, packaging
12 Complaints
13 Options
Annex A (informative) - List of corresponding former
designations
Bibliography

Abstract - (Show below) - (Hide below)

Describes the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities.

General Product Information - (Show below) - (Hide below)

Comment Closes On
Committee	ECISS/TC 103
Document Type	Draft
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
11/30239476 DC : 0	Identical
98/705400 DC : DRAFT MAR 1998	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 13583:2012	Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
EN 10162:2003	Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
03/103470 DC : DRAFT FEB 2003	BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
BS EN 10162:2003	Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
I.S. EN 13583:2012	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE
VDI 3388:2012-03	Materials for trimming and forming dies
11/30239473 DC : 0	BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
04/30118252 DC : DRAFT AUG 2004	EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
UNI EN 13583 : 2012	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE
98/705399 DC : DRAFT MAR 1998	PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
03/103468 DC : DRAFT FEB 2003	BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
UNE-EN 13583:2013	Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance
EN 13583:2012	Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance
PREN 10025-1 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 13583:2012-10	FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE
DIN EN 10162:2003-12	Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003

Standards Referencing This Book - (Show below) - (Hide below)

EN 10162:2003	Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10221:1995	Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10029:2010	Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10056-2:1993	Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN ISO 643:2012	Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
EN 10279:2000	Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10034:1993	Structural steel I and H sections - Tolerances on shape and dimensions
ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 10024:1995	Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 1011-2:2001/A1:2003	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10308:2001	Non destructive testing - Ultrasonic testing of steel bars
EN 10306:2001	Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
EN 10163-2:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10163-1:2004/AC:2007	DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
EN 10060:2003	Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10017:2004	Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10163-3:2004	Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
ISO 643:2012	Steels Micrographic determination of the apparent grain size
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
PREN 10025-1 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
EN 10020:2000	Definition and classification of grades of steel
EN 10061:2003	Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003	Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
CEN/TR 10347:2006	Guidance for forming of structural steels in processing
ISO 14713-2:2009	Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
EN 10055:1995	Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10160:1999	Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10067:1996	Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
EN ISO 14713-2:2009	Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart