PREN 12665 : DRAFT 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
Superseded date
01-06-2011
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Eye and vision
3.2 Light and colour
3.3 Lighting equipment
3.4 Daylight
3.5 Lighting installations
3.6 Lighting measurements
4 Framework for the specification of lighting
requirements
4.1 General
4.2 Illuminance
4.3 Luminance
4.4 Glare
4.5 Colour
4.6 Energy
4.7 Maintenance
4.8 Measurements
4.9 Accuracy
Annex A (informative) - Additional explanation of
defined terms
Annex B (informative) - Index of terms
Annex C (informative) - A deviation
Bibliography
Describes basic terms for use in all lighting applications; specialist terms with limited applications are given in individual standards.
| Committee |
TC 169
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| 09/30185891 DC : 0 | Identical |
| 98/202927 DC : DRAFT JUN 1998 | PREN 13201-1: ROAD LIGHTING - PART 1: SELECTION OF LIGHTING CLASSES |
| CR 14380:2003 | Lighting applications - Tunnel lighting |
| VDI 6000 Blatt 3:2011-06 | Provision and installation of sanitary facilities - Public buildings and -areas |
| 98/202929 DC : DRAFT JUN 1998 | PREN 13201-3: ROAD LIGHTING - PART 3: CALCULATION OF PERFORMANCE |
| PREN 13201-1 : DRAFT 1998 | ROAD LIGHTING - PART 1: SELECTION OF LIGHTING CLASSES |
| PREN 14175-2 : DRAFT 2001 | FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| 02/123878 DC : DRAFT OCT 2002 | BS EN 14175-3 - FUME CUPBOARDS - PART 3: TYPE TEST METHODS |
| 01/122563 DC : DRAFT JULY 2001 | BS EN 14175-2 - FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. CR 14380:2003 | LIGHTING APPLICATIONS - TUNNEL LIGHTING |
| BS 5266-7(1999) : 1999 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| 98/202928 DC : DRAFT JUN 1998 | PREN 13201-2: ROAD LIGHTING - PART 2: PERFORMANCE REQUIREMENTS |
| EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| EN 60924:1991/A1:1994 | SPECIFICATION FOR GENERAL AND SAFETY REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| EN 61046:1994/A1:1996 | D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTERS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| EN 61047:2004 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| EN 61048:2006/A1:2016 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015) |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| EN 60920:1991/A11:2000 | BALLAST FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| EN 60969:1993/A2:2000 | SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - PERFORMANCE REQUIREMENTS |
| EN 61199:2011/A2:2015 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
| EN 60432-2:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| EN 60929:2011/A1:2016 | AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| ISO/CIE 10527:1991 | CIE standard colorimetric observers |
| IEC 60929:2011+AMD1:2015 CSV | AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements |
| IEC 60928:1995+AMD1:1999 CSV | Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements |
| IEC 61047:2004 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements |
| EN 60923:2005/A1:2006 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
| EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
| IEC 61199:2011+AMD1:2012+AMD2:2014 CSV | Single-capped fluorescent lamps - Safety specifications |
| IEC 61167:2015 | Metal halide lamps - Performance specification |
| IEC 60925:1989+AMD1:1996+AMD2:2001 CSV | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| EN 60928:1995/A1:1999 | AUXILIARIES FOR LAMPS - A.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| IEC 61049:1991 | Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements |
| EN 61049:1993 | Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
| EN 60921:2004/A1:2006 | BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| EN 60357:2003/A11:2016 | TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
| IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
| IEC 60969:2016 | Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements |
| EN 60064:1995/A5:2009 | TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES - PERFORMANCE REQUIREMENTS |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| ISO 8995-3:2006 | Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places |
| IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
| EN 60926:1996/A1:1999 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| EN 60155:1995/A2:2007 | GLOW-STARTERS FOR FLUORESCENT LAMPS |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| IEC 61046:1993 | D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements |
| IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60155:1993 | Glow-starters for fluorescent lamps |
| EN 60432-1:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011) |
| IEC 60923:2005+AMD1:2006 CSV | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
| EN 60922:1997 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
| ISO 8995-1:2002 | Lighting of work places Part 1: Indoor |
| IEC 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| IEC 60926:1995+AMD1:1999 CSV | Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirements |
| EN 61195:1999/A2:2015 | DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014) |
| IEC 60922:1997 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
| IEC 60920:1990 | Ballasts for tubular fluorescent lamps - General and safety requirements |
| EN 60925:1991/A2:2001 | SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.