Skip to content
Please enter a keyword to search

  • PREN 12972 : DRAFT 2017

    Current The latest, up-to-date edition.

    TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS

    Available format(s): 

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviations
    4 Inspections and tests
    5 Procedures and documentation for inspections and tests
    Annex A (informative) - Applicable items of tank
            inspection - Survey Table
    Annex B (normative) - Technical data sheet for type approval
    Annex C (informative) - Certificate of initial, periodic and
            intermediate inspection and exceptional check
    Annex D (informative) - Tank plates for fixed tanks (tank vehicles)
            and demountable tanks for the transport of dangerous goods
    Annex E (normative) - Tank plates for tank containers for the
            transport of dangerous goods
    Annex F (normative) - Manufacturing tolerances
           (based on EN 13445-4:2014 [14])
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines testing, inspection and marking for the type approval, initial inspection, periodic inspection, intermediate inspection and exceptional check of metallic tanks (shell and equipment) of fixed tanks (tank vehicles), demountable tanks, rail tank wagons, portable tanks and tank containers for the transport of dangerous goods.

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee TC 296
    Document Type Draft
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1432:1997 Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions
    ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
    EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
    ISO 17643:2015 Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
    EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
    ISO 9606-4:1999 Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
    ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
    EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
    ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
    ISO 11666:2010 Non-destructive testing of welds Ultrasonic testing Acceptance levels
    ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
    EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
    ISO 23277:2015 Non-destructive testing of welds Penetrant testing Acceptance levels
    ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
    ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials
    EN ISO 6520-2:2013 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013)
    EN 12079-1 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
    EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
    ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
    EN 14025:2013+A1:2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
    ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
    ISO 14731:2006 Welding coordination Tasks and responsibilities
    EN ISO 23278 : 2015 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING - ACCEPTANCE LEVELS (ISO 23278:2015)
    ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
    EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
    EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
    EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
    EN ISO 9015-1:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
    EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
    EN 12493:2013+A1:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
    ISO 23278:2015 Non-destructive testing of welds Magnetic particle testing Acceptance levels
    ISO 17640:2017 Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    EN ISO 17643 : 2015 NON-DESTRUCTIVE TESTING OF WELDS - EDDY CURRENT EXAMINATION OF WELDS BY COMPLEX PLANE ANALYSIS (ISO 17643:2015)
    ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
    ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
    EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
    ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
    EN 13445-4 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
    ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
    EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
    EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
    ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
    EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
    EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
    ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
    ISO 1496-3:1995 Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    UIC 591 : 3ED 2007 ROLLER UNITS FOR HORIZONTAL TRANSSHIPMENT - TECHNICAL CONDITIONS GOVERNING THEIR USE IN INTERNATIONAL TRAFFIC
    ISO 17639:2003 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
    EN ISO 14731:2006 Welding coordination - Tasks and responsibilities (ISO 14731:2006)
    CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
    ISO 17637:2016 Non-destructive testing of welds Visual testing of fusion-welded joints
    EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
    EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
    EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
    ISO 6520-2:2013 Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
    EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
    ISO 9016:2012 Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination
    ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
    EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
    EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
    EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
    ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
    EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
    EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
    EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
    EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
    ISO 9015-1:2001 Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints
    EN 14564:2013 Tanks for transport of dangerous goods - Terminology
    ISO 17638:2016 Non-destructive testing of welds Magnetic particle testing
    UIC 592-4 : 3ED 2007 SWAP BODIES FOR GRAB HANDLING AND SPREADER GRIPPING - TECHNICAL CONDITIONS
    EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
    EN ISO 9606-3 : 1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
    ISO 9606-3:1999 Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective