PREN 15651-4 : DRAFT 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
01-09-2012
12-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Durability
6 Sampling
7 Evaluation of conformity
8 Marking and labelling
Annex A (informative) - Example on the frequency
of tests for factory production control
Annex B (normative) - Determination of the change of
volume of self levelling cold applied joint
Annex ZA (informative) - Clause of this European
Standard addressing the provisions of EU
Construction Products Directive
Bibliography
Describes definitions and requirements for cold applied non-structural elastic sealants used for movement joints in floors in building construction for interior and exterior use.
| Committee |
TC 349
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| 12/30254141 DC : 0 | Identical |
| 07/30161873 DC : 0 | Identical |
| PREN 15651-5 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 5: EVALUATION OF CONFORMITY AND MARKING |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 6927:2012 | Buildings and civil engineering works Sealants Vocabulary |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| EN ISO 7390:2003 | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003) |
| EN ISO 9046:2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
| ISO 7389:2002 | Building construction Jointing products Determination of elastic recovery of sealants |
| EN 14187-3:2017 | Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 10590:2005 | Building construction Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| ISO 11600:2002 | Building construction Jointing products Classification and requirements for sealants |
| ISO 7390:2002 | Building construction Jointing products Determination of resistance to flow of sealants |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN ISO 10591:2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN ISO 10590:2005 | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
| ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| ISO 10591:2005 | Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| ISO 13640:1999 | Building construction Jointing products Specifications for test substrates |
| EN ISO 11431:2002 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
| ISO 9046:2002 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| EN ISO 8340:2005 | Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.