PREN 1825-1 : DRAFT 1995

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL

Available format(s):

Superseded date: 01-09-2004

Language(s):

Published date: 12-01-2013

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

0 Foreword
1 Scope
2 Normative References
3 Definitions
  3.1 Grease
  3.2 Influent
  3.3 Installation for separation
  3.4 Grease separator
  3.5 Sludge trap
  3.6 Extension shafts
  3.7 Built-in components
  3.8 Grease separation chamber
  3.9 Grease collection chamber
  3.10 Inlet area
  3.11 Outlet area
  3.12 Sampling point
  3.13 Nominal size (NS)
  3.14 Maximum operational liquid level
  3.15 Automatic alarm device
  3.16 Sizing
4 Nominal sizes
5 Requirements
  5.1 Durability
  5.2 Coatings/linings
  5.3 Structural requirements
  5.4 Structural strength
  5.5 Functional requirements
6 Marking
  6.1 Installations for separation
  6.2 Automatic alarm devices
7 Installation, operation and maintenance instructions
  7.1 Installation instructions
  7.2 Operation and maintenance
8 Testing
  8.1 Documentation and samples
  8.2 General
  8.3 Materials
  8.4 Coatings/linings
  8.5 Structural requirements
  8.6 Hydraulic requirements
  8.7 Marking
  8.8 Installation, operating and maintenance instructions
  8.9 Type testing
9 Quality control
  9.1 General
  9.2 Internal quality control carried out by the
       manufacturer
  9.3 External quality control carried out by a third
       party
Annex A (normative) Requirements and test methods for
        coatings and linings
  A.1 Requirements
  A.2 Test methods
Annex B (normative) Requirements for heating oil extra
        light
Annex C (normative) Requirements for analysis of effluent
        samples
Annex D (informative) Model schemes of quality control

Abstract - (Show below) - (Hide below)

Covers definitions, nominal sizes, principles of design and performance requirements, marking, testing and the quality control for installations for separation of grease.

General Product Information - (Show below) - (Hide below)

Comment Closes On
Committee	TC 165
Document Type	Draft
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 1825-1:2004/AC:2006

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
95/101288 DC : DRAFT FEB 1995	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 1825-2:2002-05	Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance; German version EN 1825-2:2002
BS EN 12056-2:2000	Gravity drainage systems inside buildings Sanitary pipework, layout and calculation
EN 1825-2:2002	Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance
BS EN 1825-2:2002	Grease separators Selection of nominal size, installation, operation and maintenance

Standards Referencing This Book - (Show below) - (Hide below)

ISO 1514:2016	Paints and varnishes — Standard panels for testing
ISO 2719:2016	Determination of flash point — Pensky-Martens closed cup method
EN 29002 : 1994	QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN PRODUCTION & INSTALLATION
EURONORM 81 : 1969	HOT-ROLLED PLAIN ROUND REINFORCING STEEL - DIMENSIONS, WEIGHTS, PERMISSIBLE DEVIATIONS
EURONORM 80 : 1985	REINFORCING STEEL FOR NON-PRESTRESSED REINFORCEMENT; TECHNICAL TERMS OF DELIVERY
ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO/R 527:1966	Plastics Determination of tensile properties
EN 41 : 1975	DETERMINATION OF THE SULFUR CONTENT OF PETROLEUM PRODUCTS BY THE WICKBOLD COMBUSTION METHOD
ISO 3675:1998	Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
ENV 206 : 1990	CONCRETE - PERFORMANCE, PRODUCTION, PLACING AND COMPLIANCE CRITERIA
ISO 1083:2004	Spheroidal graphite cast irons - Classification
EN 59:2016	Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN 116:2015	Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
EN 63 : 1977	GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD
EN 61 : 1977	GLASS REINFORCED PLASTICS - DETERMINATION OF TENSILE PROPERTIES
PREN 681-1 : DRAFT 2016	ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
ISO 2160:1998	Petroleum products Corrosiveness to copper Copper strip test
EURONORM 88 PT2 : 1986	STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP FOR GENERAL PURPOSES
EURONORM 88 PT1 : 1986	FORGINGS, RUSTLESS, STEELS, WIRES
ISO 6615:1993	Petroleum products Determination of carbon residue Conradson method
EN 45011 : 1998	GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 6272:1993	Paints and varnishes — Falling-weight test
ISO 7253:1996	Paints and varnishes — Determination of resistance to neutral salt spray (fog)
ISO 4624:2016	Paints and varnishes — Pull-off test for adhesion
ISO 180:2000	Plastics Determination of Izod impact strength
ASTM D 790 : 2017 : REDLINE	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
EN 62 : 1977	GLASS REINFORCED PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING & TESTING
ISO 1518:1992	Paints and varnishes Scratch test
EN 124:1994	Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
ISO 2815:2003	Paints and varnishes Buchholz indentation test
ISO 1872-1:1993	Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications
ISO 185:2005	Grey cast irons Classification
ISO 630:1995	Structural steels Plates, wide flats, bars, sections and profiles
EN 7 : 1974	DETERMINATION OF ASH FROM PETROLEUM PRODUCTS
ISO 3405:2011	Petroleum products Determination of distillation characteristics at atmospheric pressure
ISO 3105:1994	Glass capillary kinematic viscometers — Specifications and operating instructions
ISO 2409:2013	Paints and varnishes Cross-cut test
ENV 1992-1-1 : DRAFT 91 COR 1992	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
ISO 178:2010	Plastics Determination of flexural properties
EN 45012 : 1998	GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
EN 29001 : 1994	QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN DESIGN/DEVELOPMENT, PRODUCTION, INSTALLATION & SERVICING
ISO 3755:1991	Cast carbon steels for general engineering purposes
ISO 1521:1973	Paints and varnishes Determination of resistance to water Water immersion method
ISO 4628-2:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN 60 : 1977	GLASS REINFORCED PLASTICS - DETERMINATION OF THE LOSS ON IGNITION

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart