PREN 2500/2 : 200P3
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 2: SPECIFIC REQUIREMENTS FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS
Available format(s)
Hardcopy , PDF
Withdrawn date
08-12-2023
Superseded by
Language(s)
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Definitions
4 The use of metallic material EN aerospace standards
5 Instructions for drafting of metallic material EN
aerospace standards
Specific requirements that are needed for the drafting and use of aluminium, aluminium alloy and magnesium alloy material standards for aerospace applications are given in this standard. This standard shall be used together with EN 2500-1.
| Committee |
C5
|
| DevelopmentNote |
Inactive for new design, see PREN 4500-2 (07/2003)
|
| DocumentType |
Draft
|
| Pages |
1
|
| ProductNote |
This standard superseded by PREN 4500-2 : 200P1
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| XP PREN 3997 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T3 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| XP PREN 4004 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P3103- - H16 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| PREN 3348 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED AND ARTIFICIALLY AGED (T62) - PLATE - 6 <= A <= 50 MM |
| PREN 3337 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T74511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3551 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 90 MM |
| PREN 3880 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075-T73 - DIE FORGINGS - A <= 125 MM |
| PREN 3554 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED, COLD COMPRESSED AND ARTIFICIALLY AGED (T7652) - HAND FORGINGS A <= 200 MM |
| DIN EN 2092:2006-10 | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm <kleiner |
| XP PREN 4005 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5052- - O - SHEET AND STRIP - 0,3 MM <= A <= 6 MM |
| XP PREN 3474 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T81 - SHEET AND STRIP - 0,25 MM <= A <= 6 MM |
| PREN 3123 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - STRUCTURAL PRECISION CASTINGS |
| XP PREN 4100 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T62 - SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| PREN 3340 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7050) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76) - DIE FORGINGS - A <= 200 MM |
| DIN EN 2094:1993-12 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7009-T74 - DIE FORGINGS 3 MM <= A <= 150 MM |
| DIN EN 2126:1993-12 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075-T651 - PLATE 6 MM < A <= 80 MM |
| XP PREN 4099 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T62 - CLAD SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| XP PREN 4101 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T4 - SHEET AND STRIP WITH IMPROVED STRETCH FORMING CAPABILITY - 0,4 MM <= A <= 6 MM |
| PREN 3550 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T8511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 150 MM |
| PREN 3343 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76511) - EXTRUDED BARS AND SECTIONS - 1 < (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3349 : 200P2 | AEROSPACE SERIES - MAGNESIUM ALLOY MG-C92 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - CASTING |
| DIN EN 2395:2006-10 | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm <kleiner |
| DIN EN 2093:1993-12 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7009-T74 - HAND FORGINGS 20 MM <= A <= 150 MM |
| PREN 3122 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-C27 - SOLUTION TREATED AND ARTIFICIALLY AGED (T6) - HIGH STRENGTH - STRUCTURAL PRECISION CASTINGS |
| PREN 3345 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, WATER QUENCHED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BAR AND SECTION - (A OR D) <= 90 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| BS EN 2326:1992 | Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm |
| EN 2326:1992 | Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D < or = 200 mm |
| EN 2094:1992 | Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm < or = a < or = 150 mm |
| EN 2381:1992 | Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm < or = a < or = 150 mm |
| EN 2128:1992 | Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm < or = a or D < or = 75 mm |
| EN 2093:1992 | Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm < or = a < or = 150 mm |
| EN 2100:1992 | Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm |
| EN 2126:1992 | Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a < or = 80 mm |
| XP PREN 4006 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082- - T4 OR T42 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| XP PREN 4007 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082- - T6 OR T62 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| XP PREN 4102 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T81 - CLAD SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| XP PREN 3998 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T42 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| PREN 3881 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075-T73 - HAND FORGINGS - A <= 125 MM |
| PREN 3555 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7075) - SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T79510) - EXTRUDED BARS AND SECTION 1.2 < (A OR D) <= 100 MM - WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3996 : 200P2 | AEROSPACE SERIES - ALUMINIUM AL-P1100-H14 - SHEET AND STRIP - 0,3 MM <= A <= 6 MM |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
| BS EN 2318:1992 | Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm |
| PREN 3350 : 200P2 | AEROSPACE SERIES - ALUMINIUM, ALUMINIUM ALLOYS - TEMPER DESIGNATIONS |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.