PREN 3155-009 : 200P3
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 009: CONTACTS, ELECTRICAL, FEMALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD
Available format(s)
Hardcopy , PDF
Language(s)
English
Superseded date
14-06-2024
Superseded by
€121.76
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
Describes the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
| Committee |
C2
|
| DevelopmentNote |
To be read in conjunction with PREN 3155-001. (07/2003)
|
| DocumentType |
Draft
|
| Pages |
14
|
| ProductNote |
Superseded byEN 3155-009:2009
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 06/30148574 DC : DRAFT APR 2006 | Identical |
| DIN EN 3155-009:2009-06 | Identical |
| DIN EN 3155-003:2006-10 | Identical |
| PREN 3155-008 : 200P3 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 008: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
| EN 3155-008:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard |
| TR 4837 : 2014 | AEROSPACE SERIES - APPLICABLE CRIMPING TOOLS FOR ELECTRICAL CONTACT PRODUCT STANDARDS EN 3155-003, EN 3155-008 AND EN 3155-009 FOR CONTACT SIZE # 10 AND BARREL SIZE # 10 ONLY |
| NF EN 3155-008 : 2006 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 008: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
| 13/30287472 DC : 0 | BS EN 3155-008 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 008: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
| PREN 3372-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| BS EN 3155-008:2005 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, male, type A, crimp, class S. Product standard |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| MIL-I-81969-18 Revision A:1979 | Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C (S/S By SAE-AS81969/18) |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 3155-008:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| SAE AS39029/58B | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES I, II, III, AND IV, AND MIL-DTL-55302/69 AND MIL-DTL-83733 CONNECTORS) |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| MIL-I-81969-14 Revision C:1987 | Installing and Removal Tools, Connector Electrical Contact, Type III, Class 2, Composition B (S/S By SAE-AS81969/14) |
| MIL-I-81969-30 Base Document:1979 | Installing and Removal Tools, Connector Electrical Contact, Type II, Class 2, Composition C (S/S By SAE-AS81969/30) |
| MIL-C-22520-23 Base Document:1979 | Crimping Tools, Terminal, Hand or Power Actuated, Wire Termination, Pneumatic Tool for Wire Barrel Sizes 0000 Through 8 (S/S by SAE-AS22520/23) |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| ISO 8843:2005 | Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| SAE AS39029/56A | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS) |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| MIL-C-22520-7 Revision B:1976 | Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel Sizes 16, 20, and 22 (S/S by SAE-AS22520/7) |
| MIL-DTL-22520 Revision G:1997 | Crimping Tools, Wire Termination, General Specification for (S/S by SAE-AS22520) |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| MIL-C-22520-1 Revision C:1976 | Crimping Tools, Terminal, Hand, Wire Termination for Wire Barrel Sizes 12 Through 20 (S/S by SAE-AS22520/1) |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| MIL-I-81969 Revision B:1982 | Installing and Removal Tools, Connector Electrical Contact, General Specification for (S/S by SAE-AS81969) |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.