PREN 343 : DRAFT 2017
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN
21-09-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance assessment and
requirements
5 Pretreatment
6 Test methods
7 Size designation
8 Marking and care labelling
9 Information supplied by the
manufacturer
Annex A (informative) - Recommendations
for wearing time
Annex B (informative) - Test device for one
sided exposure to fuel and oil
Annex C (informative) - Significant changes
between this document and the
previous edition
Annex ZA (informative) - Relationship between
this European Standard and the essential
requirements of EU Directive 89/686/EC
aimed to be covered
Annex ZB (informative) - Relationship between
this European Standard and the essential
requirements of Regulation (EU) 2016/245
of the European parliament and of the
Council of 9 March 2016 on personal
protective equipment aimed to be covered
Bibliography
Describes requirements and test methods applicable to ready-made garments, materials and seams of protective clothing against the influence of precipitation (e.g. rain, snowflakes), fog and ground humidity.
| Committee |
TC 162
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| 17/30354654 DC : 0 | Identical |
| 17/30354654 DC : DRAFT SEP 2017 | Identical |
| EN 530:2010 | Abrasion resistance of protective clothing material - Test methods |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 14360:2004 | Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN ISO 7854:1997 | Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995) |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 13688:2013 | Protective clothing — General requirements |
| EN ISO 13938-2:1999 | Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| ISO 30023:2010 | Textiles Qualification symbols for labelling workwear to be industrially laundered |
| EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| EN ISO 30023:2012 | Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) |
| EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 5085-1:1989 | Textiles Determination of thermal resistance Part 1: Low thermal resistance |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.