Skip to content
Please enter a keyword to search

  • PREN 3475-601 : 200P2

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 601: SMOKE DENSITY

    Available format(s):  Hardcopy, PDF

    Withdrawn date:  20-12-2023

    Language(s):  English

    Published date: 

    Publisher:  Aerospace & Defence Industries Association of Europe

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Terms and definitions
    3 Principle of method
    4 Test apparatus
       4.1 Test chamber
       4.2 Manometer
       4.3 Pressure regulator
       4.4 Chamber wall thermocouple
       4.5 Electric power supply
       4.6 Radiant heat furnace
       4.7 Pilot burner system
       4.8 Specimen holder
       4.9 Support for radiant heat furnace and specimen holder
       4.10 Photometric system
       4.11 Exhaust hood
    5 Test specimens
       5.1 General
       5.2 Number of specimens
       5.3 Specimen length
       5.4 Specimen preparation
    6 Conditioning
    7 Check and maintenance of the test apparatus
       7.1 Furnace protection
       7.2 Periodic calibration procedure
       7.3 Chamber cleaning
       7.4 Adjustment of test chamber
    8 Test performance
    9 Calculation
    10 Requirements
    11 Report

    Abstract - (Show below) - (Hide below)

    Intends for determination of the specific optical density of smoke generated by electrical wire/cable insulation materials due to pyrolitic decomposition under the influence of radiant heat only or with simultaneous flame application.

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee C2
    Document Type Draft
    Product Note Superseded by EN 3475-601:2007
    Publisher Aerospace & Defence Industries Association of Europe
    Status Withdrawn
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 2265-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 003: SCREENED (SPIRAL) AND JACKETED INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2714-009 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2714-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 007: SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-003 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 003: SINGLE BRAID - 77 OHMS - TYPE KG - PRODUCT STANDARD
    PREN 2266-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-011 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 011: SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 006: SCREENED (BRAIDED) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2714-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 008: SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2714-011 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 011: DM FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 3745-601 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 601: SMOKE DENSITY
    PREN 2714-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: SCREENED (SPIRAL) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2346-004 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C- PART 004: DN FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD
    PREN 4604-004 : 200P3 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 004: CABLE, MICROCOAXIAL, HIGH IMMUNITY, 50 OHMS, 200 DEGREES C, TYPE WS - PRODUCT STANDARD
    PREN 2714-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 005: SCREENED (SPIRAL) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 007: SCREENED (SPRIAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2266-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-009 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2266-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 4604-003 : 200P2 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 003: COAXIAL CABLE 50 OHM, 200 DEGREES C, TYPE WZ - PRODUCT STANDARD
    PREN 2346-003 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DL FAMILY, SINGLE CORE - PRODUCT STANDARD
    PREN 2267-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 007: DMA FAMILY, SINGLE INK-JET PRINTABLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
    PREN 2854-003 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
    BS EN 4608-001:2006 Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65°C and 260°C Technical specification
    PREN 2267-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 008: DM FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
    PREN 4612-013 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 013: SX, TC AND UC - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR EQUIPMENT ONLY, WITH JACKET AND SCREEN (SPIRAL) - UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2265-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 003: SCREENED (SPIRAL) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    PREN 4641-102 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
    PREN 2714-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2714-010 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 008: SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2714-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 006: SCREENED (BRAIDED) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-010 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    14/30297807 DC : 0 BS EN 4681-005 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 005: AZ FAMILY, SINGLE, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    PREN 2714-012 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 012: DM FAMILY, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-009 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 009: SCREENED (SPIRAL) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 004: SCREENED (BRAIDED) AND JACKETED, INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2712-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 007: SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 006: SCREENED (BRAIDED) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2712-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 005: SCREENED (SPIRAL) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-005 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD
    PREN 4604-007 : 200P3 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL, 50 OHMS, 200 DEGREES C, TYPE WN - PRODUCT STANDARD
    I.S. EN 4608-001:2006 AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION
    BS EN 2714-010:2006 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C Screened (braided) and jacketed, YAG X3 laser Printable. Product standard
    14/30297809 DC : 0 BS EN 4681-006 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
    BS EN 2714-008:2006 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C Screened (braided) and jacketed, UV laser printable. Product standard
    BS EN 2266-003:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C Ink jet printable. Product standard
    BS EN 2346-003:2006 Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DL family, single core. Product standard
    BS EN 2346-004:2006 Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DN family, single UV laser printable and multicore assembly. Light weight. Product standard
    BS EN 2267-005:2006 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C UV laser printable. Product standard
    EN 2346-004:2006 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard
    EN 2267-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: UV laser printable - Product standard
    EN 2714-005:2006 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard
    EN 2346-003:2006 Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 003: DL family, single core - Product standard
    EN 2713-005:2006 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard
    EN 2713-009:2006 Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
    EN 4608-001:2006 Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification
    PREN 2267-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2265-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2265-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
    PREN 2267-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
    PREN 2266-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
    PREN 3475-602 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 602: TOXICITY
    PREN 2267-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 2713-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 005: SCREENED (SPRIAL) AND JACKETED, CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 2267-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-006 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 006: SINGLE BRAID - 78 OHMS - TYPE XM - PRODUCT STANDARD
    PREN 2713-010 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 010: SCREENED (BRAIDED) AND JACKETED, YAG X3 LASER PRINTABLE - PRODUCT STANDARD
    PREN 3375-004 : 0 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD
    BS EN 2714-004:2006 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C Screened (braided) and jacketed, ink jet printable. Product standard
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective