PREN 3661-001 : 200P3
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
Hardcopy , PDF
11-12-2023
English
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Characteristics
7 Tests
8 Qualification tests
9 Quality assurance
10 Marking
11 Delivery conditions
12 Packaging
13 Storage
Describes the single-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. Also describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
Committee |
C2
|
DocumentType |
Draft
|
Pages |
19
|
ProductNote |
Superseded by EN 3661-001:2006
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Withdrawn
|
SupersededBy |
PREN 3661-005 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, - TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
PREN 3661-006 : 200P1 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 006: WITH POLARIZED SIGNAL CONTACT - BUS BAR VERSION - PRODUCT STANDARD |
EN 2282:1992 | Aerospace series - Characteristics of aircraft electrical supplies |
EN 3841-510:2004 | Aerospace series - Circuit breakers - Test methods - Part 510: Strength of signal contact terminals |
MIL-I-81969-1 Revision A:1979 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION C |
EN 3841-401:2004 | Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust |
EN 3841-406:2004 | Aerospace series - Circuit breakers - Test methods - Part 406: Flammability |
EN 3841-509:2004 | Aerospace series - Circuit breakers - Test methods - Part 509: Insertion and extraction forces of signal contact terminals |
EN 3841-402:2004 | Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion |
EN 3841-305:2004 | Aerospace series - Circuit breakers - Test methods - Part 305: Short-circuit performance |
EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
EN 3841-508:2004 | Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration |
PREN 2826 : 200P1 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE |
EN 3841-308:2004 | Aerospace series - Circuit breakers - Test methods - Part 308: Lightning |
EN 3841-307:2004 | Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping system |
EN 3841-502:2004 | Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces |
EN 3841-304:2004 | Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points |
EN 3841-202:2004 | Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses |
EN 3841-405:2004 | Aerospace series - Circuit breakers - Test methods - Part 405: Fluid resistance |
EN 3841-306:2004 | Aerospace series - Circuit breakers - Test methods - Part 306: Service life |
EN 3841-506:2004 | Aerospace series - Circuit breakers - Test methods - Part 506: Vibration performance |
EN 3841-301:2004 | Aerospace series - Circuit breakers - Test methods - Part 301: Voltage drop |
EN 3841-504:2004 | Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements |
EN 3841-403:2004 | Aerospace series - Circuit breakers - Test methods - Part 403: Humidity |
PREN 2825 : 200P1 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY |
EN 3841-100:2004 | Aerospace series - Circuit breakers - Test methods - Part 100: General |
EN 3841-302:2004 | Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance |
TR 6083 : 4 | AEROSPACE SERIES - CUT-OUTS FOR INSTALLATION OF ELECTRICAL COMPONENTS |
PREN 3844-1 : 200P1 | AEROSPACE SERIES - FLAMMABILITY OF NON-METALLIC MATERIALS - PART 1: SMALL BURNER TEST, VERTICAL - DETERMINATION OF THE VERTICAL FLAME PROPAGATION |
EN 3841-505:2004 | Aerospace series - Circuit breakers - Test methods - Part 505: Strength of main terminals |
EN 3841-503:2004 | Aerospace series - Circuit breakers - Test methods - Part 503: Strength of actuating components |
EN 3841-507:2004 | Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks |
EN 3841-404:2004 | Aerospace series - Circuit breakers - Test methods - Part 404: Explosion proofness |
EN 3841-201:2004 | Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.