Skip to content
Please enter a keyword to search

  • PREN 4400-3 : 200P1

    Current The latest, up-to-date edition.

    AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-10-2001

    Publisher:  Aerospace & Defence Industries Association of Europe

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    0 Introduction
    1 Scope
    2 Normative references
    3 Definitions
    4 Wording of order
    5 Health and safety
    6 Technical requirements
    Annex A (normative) Orientation and location of tensile
            test specimens in bar and sections
    Annex B (normative) Orientation and location of bearing
            stress test specimens in bar and sections

    Abstract - (Show below) - (Hide below)

    Defines the requirements for the ordering, manufacture, testing, inspection and delivery of aluminium and aluminium alloy, bar and section, produced by extrusion or drawing.

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee C5
    Document Type Draft
    Publisher Aerospace & Defence Industries Association of Europe
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 3342 : 200P3 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T4 OR T42 - DRAWN OR EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    PREN 2702 : 200P3 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T6 OR T62 - DRAWN OR EXTRUDED BAR AND SECTION - A OR D <= 200 MM
    PREN 2635 : 200P2 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2014A - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
    PREN 2632 : 200P1 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075-T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
    PREN 4293 : 200P2 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175-T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    DIN EN 2633:2016-02 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    12/30268169 DC : 0 BS EN 8.4567 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010 - T76 - EXTRUDED BARS - 150 MM < D <= 250 MM
    BS EN 2702:2005 Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
    BS EN 3342:2005 Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
    BS EN 2633:2015 Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Extruded bars and sections. 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
    I.S. EN 2633:2015 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    PREN 3338 : 200P3 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T74511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
    PREN 3347 : 200P3 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T8511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
    DIN EN 2704:2016-02 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - DRAWN BARS - D[E] <= 75 MM
    BS EN 2704:2015 Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Drawn bars. De ≤ 75 mm
    BS EN 3347:2005 Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
    I.S. EN 2632:2005 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    I.S. EN 2704:2015 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - ALCU4MG1 - T3511 - DRAWN BAR - D[E] <= 75 MM
    PREN 3344 : 200P3 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T76511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM - WITH PERIPHERAL COARSE GRAIN CONTROL
    BS EN 2635:2005 Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
    EN 3338 : 2005 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - T74511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    UNI EN 4293 : 2014 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    PREN 2633 : 200P1 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - EXTRUDED BARS AND SECTIONS 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    I.S. EN 4293:2014 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    BS EN 3344:2005 Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
    10/30227742 DC : 0 BS EN 2704 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - DRAWN BAR - D[E] <= 75 MM
    10/30239371 DC : 0 BS EN 4293 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175- AL ZN5,5MGCU(B) - T73511 - EXTRUDED BAR AND SECTION A OR D <= 150 MM
    BS EN 2632:2005 Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
    EN 4293 : 2014 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T73511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    EN 2632:2005 Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D
    EN 3344 : 2005 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - T76511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    EN 3342 : 2005 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061 - T4 OR T42 - DRAWN OR EXTRUDED BAR AND SECTION - A OR D <= 150 MM
    EN 2635 : 2005 Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D
    EN 2702:2005 Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D
    EN 3553 : 2004 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 160 MM
    EN 3347 : 2005 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T8511 - EXTRUDED BAR AND SECTION - A OR D <= 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    EN 2704:2015 Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm
    EN 2633:2015 Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
    PREN 2704 : 200P1 AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - DRAWN BAR D[E] <= 75 MM
    10/30228107 DC : 0 BS EN 2633 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL
    BS EN 4293:2014 Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D ≤ 150 mm
    BS EN 3338:2005 Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control

    Standards Referencing This Book - (Show below) - (Hide below)

    PREN 2002-01 : 200P3 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 1: TENSILE TESTING AT AMBIENT TEMPERATURE
    PREN 6072 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
    PREN 2021 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - SHEAR TESTING FOR THINFLAT PRODUCT
    TR 2410 : 2 AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS
    PREN 2078 : 2 AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL
    EN 4268 : 2012 AEROSPACE SERIES - METALLIC MATERIALS - HEAT TREATMENT FACILITIES - GENERAL REQUIREMENTS
    PREN 2720 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - TESTING OF SUSCEPTIBILITY TO EXFOLIATION CORROSION IN 2XXX AND 7XXX SERIES WROUGHT ALUMINIUM ALLOY PRODUCTS FOR AEROSPACE CONSTRUCTION
    PREN 2002-08 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 8: MICROGRAPHIC DETERMINATION OF GRAIN SIZE
    PREN 4522 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PIN-TYPE BEARING TEST OF YIELD STRENGTH
    PREN 4258 : 1995 AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
    PREN 2032-001 : 200P5 AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION
    PREN 2716 : 200P2 AEROSPACE SERIES - TEST METHOD - DETERMINATION OF SUSCEPTIBILITY TO INTERGRANULAR CORROSION - WROUGHT ALUMINIUM ALLOY PRODUCTS - AL-P2XXX- SERIES, AL-P7XXX- SERIES AND ALUMINIUM-LITHIUM ALLOYS
    EN 3987:2009 Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
    PREN 2002-06 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 6: BEND TESTING
    EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
    PREN 2004-10 : 200P1 AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 10: PREPARATION OF MICROGRAPHIC SPECIMENS FOR ALUMINIUM ALLOYS
    PREN 2032/2 : 1985 METALLIC MATERIALS - CODING OF MATERIAL IN DELIVERY HEAT TREATMENT CONDITIONS
    PREN 3874 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING
    ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
    PREN 4525 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - SHEAR TESTING
    EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
    EN 2000:1991 Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers
    EN 2004-1 : 1993 AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 1: DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM ALLOYS
    PREN 4259 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS
    PREN 3042 : 2 AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - QUALIFICATION PROCEDURE
    PREN 4523 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - COMPRESSION TESTING
    EN 10003-1 : 1994 METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD
    PREN 6018 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - DETERMINATION OF DENSITY ACCORDING TO DISPLACEMENT METHOD
    PREN 4524 : 200P1 AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - MEASUREMENT OF FATIGUE CRACK GROWTH RATES
    PREN 2715 : 200P2 AEROSPACE SERIES - MACROGRAPHIC EXAMINATION OF ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS, FORGING STOCK AND FORGINGS
    PREN 3988 : 200P1 AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING
    PREN 4050-4 : 200P1 AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective