PREN 4532 : 200P1
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 MICROMETER/280 MICROMETER FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
Hardcopy , PDF
19-12-2023
English
1 Scope
2 Normative references
3 Terms and definitions
4 Description
4.1 Construction of type 'A' primary fibre (Jacketed
fibre)
4.2 Construction of type 'B' single core cable
5 Cable characteristics
5.1 Optical performance of cable
5.1.1 Optical isolation of cable jacketing
5.1.2 Useful installed lifetime
5.1.3 Mean time between failure (MTBF)
5.2 Construction data of cable (Type B)
5.2.1 Sheath colour
5.2.2 Cable design
5.3 Mechanical characteristics of cable (Type B)
6 Fibre characteristics
6.1 Optical and material data of primary fibre
6.1.1 Fibre type
6.1.2 Refractive index difference of core/cladding
6.1.3 Numerical aperture (Theoretical)
6.1.4 Fibre core material composition
6.1.5 Cladding material composition
6.2 Geometrical data of primary fibre and concentricity
of primary coating
7 Environmental conditions
7.1 Temperature range
7.2 Operating pressure range
7.3 Humidity
7.3.1 Operating humidity
7.3.2 Storage humidity
7.4 Nuclear radiation
8 Production acceptance (routine) tests
8.1 General
8.1.1 Measurement conditions
8.1.2 Recovery conditions
8.1.3 Declaration of design and performance
8.2 Group A - Production acceptance (routine) tests
8.2.1 Acceptance tests
8.2.2 Primary fibre (for cable types 'A' and 'B')
8.2.3 Completed cable (Type B)
8.3 Group B production verification (quality) tests
8.4 Group D qualification approval tests (cable type 'B')
9 Additional test information
9.1 Repeatability of test results
9.2 Definition of full launch conditions
9.3 Full launch techniques
9.4 Additional requirements
9.5 Practical realisation
9.6 Test arrangement for low- and high- temperature tests
10 Marking and packaging requirements
10.1 Designation of type 'A' primary fibre
10.2 Designation of type 'B' cable
10.3 Marking of cable
10.3.1 General
10.3.2 Requirements for packaging and labelling
10.4 Ordering information
10.5 Cable length
10.6 Storage reel
Covers two cable types, Type A and Type B: - Type A, jacketed fibre, is intended for printed circuit board inter-connection applications inside equipment; - Type B, single core, is intended for general airframe and equipment inter-connection cable suitable for installation in all aircraft locations, with exception of power plant compartments.
DocumentType |
Draft
|
Pages |
17
|
ProductNote |
Superseded by EN 4532:2009
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
01/704470 DC : 0 | Identical |
DIN EN 4532:2009-08 | Identical |
NF EN 4532 : 2009 | Identical |
I.S. EN 3733-004:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, CONNECTOR, FOUR HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
01/715304 DC : DRAFT NOV 2001 | BS EN 3733-009 - AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR - SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING - OPERATING TEMPERATURES UP TO 150 DEGREES C CONTINUOUS - PART 009: RECEPTACLE SUB-ASSEMBLY FOR CABLE TO EN 4532 - PRODUCT STANDARD |
BS EN 3733-006:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard |
BS EN 3733-004:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, four hole fixing cable according to EN 4532, product standard |
I.S. EN 3733-003:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 003: PLUG CONNECTOR FOR CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
PREN 3733-007 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 007: FERRULE (OPTICAL CONTACT) FOR EN 4532 (200 MICROMETER/280 MICROMETER FIBRE) - PRODUCT STANDARD |
EN 3733-007:2007 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 µm/280 µm fibre) - Product standard |
PREN 3733-009 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 009: RECEPTACLE SUB-ASSEMBLY FOR CABLE TO EN 4532 (200 MICROMETER/280 MICROMETER FIBRE) - PRODUCT STANDARD |
I.S. EN 3733-006:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, CONNECTOR, JAM NUT FIXING FOR CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
I.S. EN 3733-108:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 108: CABLE SUPPORT BOOT - PRODUCT STANDARD |
01/715303 DC : DRAFT NOV 2001 | BS EN 3733-008 - AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR - SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING - OPERATING TEMPERATURES UP TO 150 DEGREES C CONTINUOUS - PART 008: PLUG SUB-ASSEMBLY FOR CABLE TO EN 4532 - PRODUCT STANDARD |
BS EN 3733-002:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuous List of product standards |
BS EN 3733-009:2006 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre). Product standard |
BS EN 3733-007:2007 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Ferrule (optical contact) for EN 4532 (200 ?m/280 ?m fibre). Product standard |
BS EN 3733-008:2006 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre). Product standard |
BS EN 3733-005:2007 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, two hole fixing for cable according to EN 4532, product standard |
BS EN 3733-003:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuous Plug connector for cable according to EN 4532, product standard |
BS EN 3733-108:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Cable support boot. Product standard |
EN 3733-108:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard |
EN 3733-008:2006 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard |
EN 3733-002:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 002: List of product standards |
EN 3733-003:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard |
EN 3733-006:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard |
EN 3733-005:2007 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532, product standard |
EN 3733-004:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532, product standard |
EN 3733-009:2006 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard |
PREN 3733-008 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 008: PLUG SUB-ASSEMBLY FOR CABLE TO EN 4532 (200 MICROMETER/280 MICROMETER FIBRE) - PRODUCT STANDARD |
PREN 3733-108 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 108: CABLE SUPPORT BOOT - PRODUCT STANDARD |
I.S. EN 3733-005:2007 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 005: RECEPTACLE, CONNECTOR, TWO HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
I.S. EN 3733-002:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 002: LIST OF PRODUCT STANDARDS |
EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
PREN 3745-601 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 601: SMOKE DENSITY |
EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
PREN 3745-510 : 200P3 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST |
PREN 3745-407 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 407: FLAMMABILITY |
PREN 2591-C6 : 1992 | ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - MOULD GROWTH |
PREN 3745-402 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 402: TEMPERATURE CYCLING |
PREN 3745-202 : 200P4 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
PREN 3733-001 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
PREN 3745-205 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL AIRCRAFT USE - TEST METHODS - PART 205: CABLE LONGITUDINAL DIMENSIONAL STABILITY |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
PREN 3745-705 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 705: CONTRAST MEASUREMENT |
PREN 3745-514 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE TEST METHODS - PART 514: CABLE TWIST BEND |
PREN 3745-401 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 401: ACCELERATED AGEING |
PREN 3745-406 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 406: COLD BEND TEST |
PREN 3745-602 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 602: TOXICITY |
IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
PREN 3745-203 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 203: CABLE DIMENSIONS |
PREN 3745-513 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 513: CRUSH RESISTANCE |
PREN 3745-506 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
PREN 3745-305 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 305: IMMUNITY TO AMBIENT LIGHT COUPLING |
ISO 2574:1994 | Aircraft — Electrical cables — Identification marking |
PREN 3745-503 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 503: SCRAPE ABRASION |
PREN 3745-505 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 505: CABLE TENSILE STRENGTH |
PREN 3745-412 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE |
PREN 3745-411 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 411: RESISTANCE TO FLUIDS |
PREN 3745-301 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
PREN 3745-306 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 306: VARIATION OF ATTENUATION DURING TEMPERATURE CYCLING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.