QQ-A-250-5 Revision F:1971
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminum Alloy Alclad 2024, Plate and Sheet (See Notice 5 for Replacement Information)
Available format(s)
PDF
Published date
18-01-1971
Publisher
Superseded date
07-04-1998
Superseded by
€16.67
Excluding VAT
1 SCOPE AND CLASSIFICATION
2 APPLICABLE DOCUMENTS
3 REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 NOTES
Outlines specific prerequisites for aluminum alloy Alclad 2024 plate and sheet; general requirements are found in QQ-A-250.
| DevelopmentNote |
F NOTICE 5 - Notice of Cancellation/Superseded by SAE AMS QQ A 250/5 and ASTM B 209. (06/2005)
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This specification covers the specific requirements for aluminum alloy alclad 2024 plate and sheet; the general requirements are covered in QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy 2024 core with thin layers of an aluminum alloy 1230 (99.30 percent minimum aluminum) anodic to the core and of approximately equal thickness, bonded to both surfaces.
| Standards | Relationship |
| SAE AMS4274A | Similar to |
| SAE AMS4195D | Similar to |
| SAE AMS4040N | Similar to |
| SAE AMS4194D | Similar to |
| MIL-C-81945 Revision B:1989 | Coating Compounds, Weapon Insulation, Intumescent |
| MIL-P-6884 Revision F:1973 | PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE (NO S/S DOCUMENT) |
| TT-P-664 Revision D:1988 | PRIMER COATING, ALKYD, CORROSION-INHIBITING, LEAD AND CHROMATE FREE, VOC-COMPLIANT (S/S BY SSPC-PAINT25) |
| MIL-T-22085 Revision E:1994 | TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING (S/S BY SAE-AMS-T-22085) |
| TT-P-2760 Revision A:1994 | Primer Coating: Polyurethane, Elastomeric, High-Solids |
| MIL-T-9906 Revision C:1988 | Tape, Identification, Aerospace Vehicle Tubing Marker |
| MIL-A-8243 Revision D:1985 | Anti-Icing and Deicing-Defrosting Fluids (S/S by SAE-AMS1424) |
| MIL-PRF-29598 Base Document:1996 | Film, Protective, Leading Edge (Pressure-Sensitive) (No S/S Document) |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| MMM-A-122 Revision C:1978 | ADHESIVE, BUTADIENE ACRYLONITRILE BASE, MEDIUM SOLIDS, GENERAL PURPOSE (NO S/S DOCUMENT) |
| MIL W 18723 : D | WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-F-22735 Revision C:1980 | Film, Elastomeric, Fluorescent, for Weapons System (ASG) (No S/S Document) |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| MIL-S-12158 Revision D:1988 | SEALING COMPOUND, NON-CURING, POLYBUTENE (S/S BY A-A-52495) |
| MIL R 007885 : C SUPP 1 | RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR |
| MIL A 25457 : B NOTICE 1 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-C-7438 Revision G:1985 | Core Material, Aluminum, for Sandwich Construction (See Notice 1 for Replacement Information) |
| MIL-S-6451 Revision E:1977 | SHIELD, PROTECTIVE, AIRCRAFT AND MISSILES (S/S BY SAE-AS6451) |
| MIL-W-45595 Revision D:1985 | Washers, Shouldered, Recessed, Saddle, Concave and Convex (S/Sby NASM45595) |
| MIL-STD-1312-21 Base Document:1985 | FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE CONSTANT AMPLITUDE (S/S BY NASM1312-21) |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| SAE AS6451A | Shields, Protective, Aircraft and Missiles |
| MIL-E-52929 Base Document:1977 | Enamel, Alkyd, Camouflage, Flash Dry (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL C 81309 : E | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
| MIL C 7907 : A | CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| MIL-D-9063 Revision B:1965 | Desealant, Integral Fuel and Oil Tanks (S/S by MIL-R-81294) |
| MMM-A-1931 Base Document:1975 | ADHESIVE, EPOXY, SILVER FILLED, CONDUCTIVE |
| MIL-C-8603 Revision B:1984 | Clamps, Loop Type, and Straps, Support |
| MIL-A-21071 Revision B:1973 | Antifogging Compound, Transparent Aircraft Enclosures (No S/S Document) |
| MIL-A-47310 Base Document:1987 | Adhesive System, Adhesive and Primer, for Bonding Ethylene-Propylene Rubber to Metal (S/S by MMM-A-121) |
| TT-P-2756 Revision A:1996 | Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content (No S/S Document) |
| ASTM D 5105 : 2005 : R2019 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| MIL-L-8937 Revision D:1982 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, NATO Code Number S-1738 (S/S by MIL-L-46010) |
| SAE AS6882 | Water Repellent, Window and Windshield, Glass and Plastic |
| MIL-C-83873 Revision A:1993 | Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (Age) (S/S by MIL-C-87937) |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MMM-A-134 Base Document:1970 | Adhesive, Epoxy Resin, Metal to Metal Structural Bonding |
| MIL L 46147 : B | LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
| L-T-100 Revision B:1988 | Tape, Pressure-Sensitive Adhesive, Polyester Film |
| MIL L 0046010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-A-46864 Revision B:1991 | Adhesive, Epoxy, Modified, Flexible, Two Component (S/S by A-A-56031) |
| MIL-A-81236 Base Document:1965 | Adhesive, Epoxy Resin with Polyamide Curing Agent |
| MIL L 81329 : C | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737, METRIC |
| MIL-T-21595 Revision D:1982 | TAPES, PRESSURE-SENSITIVE ADHESIVE, MASKING, NON-STAINING, FOR AIRCRAFT PAINTING APPLICATIONS (S/S BY SAE-AMS-T-21595) |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL-I-8670 Revision B:1993 | Installation of Fixed Guns and Associated Equipment in Naval Aircraft |
| TT-L-32 Revision A:1969 | Lacquer, Cellulose Nitrate, Gloss, for Aircraft use (S/S by A-A-3165) |
| SAE AMST22085 | Tapes, Pressure-Sensitive, Adhesive, Preservation and Sealing |
| ASTM D 5105 : 2005 : R2011 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| MIL-L-23398 Revision D:1985 | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749 |
| MIL-A-47317 Base Document:1987 | Adhesive, Air-Drying, Silicone Rubber (No S/S Document) |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (NO S/S DOCUMENT) |
| MIL S 22499 : C | SHIM STOCK, LAMINATED |
| MIL-C-27251 Revision A:1971 | Cleaning Compound, Aircraft Surface, Low Temperature (No S/S Document) |
| MIL R 83056 : 0 | RAIN REPELLENTS, IN-FLIGHT APPLIED, AIRCRAFT WINDSHIELD |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-C-81946 Base Document:1973 | Coating System, Thermal Insulation, Intumescent (No S/S Document) |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL-R-81261 Revision A:1970 | RAIN REPELLENT, GLASS WINDOW AND WINDSHIELD, FOR IN-FLIGHT APPLICATION (NO S/S DOCUMENT) |
| MIL-C-8956 Revision A:1970 | Clamps, Loop, Tube Support (For Future Req. use MIL-C-8603 and MIL-C-85052 |
| MIL-C-38334 Revision A:1971 | Corrosion Removing Compound, Prepaint, for Aircraft Aluminum Surfaces (S/S by SAE-AMS1640) |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| P-C-444 Revision B:1983 | Cleaning Compound, Solvent Soluble, Grease Emulsifying |
| MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-C-22542 Revision B:1987 | Cleaning Compound, High Pressure Cleaner, Liquid (S/S by SAE-AMS-C-22542) |
| MIL-S-11030 Revision F:1990 | Sealing Compound, Single-Component, Non-Curing, Polysulfide Base |
| MIL-C-8514 Revision C:1967 | Coating Compound, Metal Retreatment, Resin-Acid (ASG) |
| DOD-L-85645 Revision A:1988 | LUBRICANT, DRY THIN FILM, MOLECULAR BONDED (METRIC) |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-R-7885 Revision D:1988 | Rivets, Blind, Structural, Mechanically LockedSpindleand Friction Locked Spindle, General Specification for |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| ASTM D 5105 : 2005 | Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| SAE AMST23397 | Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations |
| MIL-C-81947 Revision A:1975 | Coating Compound, Thermal Insulation, Three-Component, Intumescent (No S/S Document) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| MIL-R-81903 Revision A:1977 | Remover, Acid Activated, for Amine-Cured Epoxy Coating Systems |
| MMM-A-1754 Base Document:1973 | ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED |
| MIL-PRF-16173 Revision E:1993 | Corrosion Preventive Compound, Solvent Cutback, Cold-Application |
| MIL-R-81835 Base Document:1971 | REMOVER, ORGANIC COATING, HOT TANK TYPE (S/S BY SAE-AMS-R-81835) |
| MIL-T-23142 Revision B:1977 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION (S/S BY A-A-59298) |
| MIL-P-8045 Revision B:1964 | Plastic, Self-Sealing and Non-Self-Sealing Tank Backing Material |
| L-P-528 Revision B:1976 | Plastic Sheet, Pressure Sensitive Adhesive Coated, Paper-Backed (S/S by A-A-2681) |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| MMM-A-105 Base Document:1967 | Adhesive and Sealing Compounds Cellulose Nitrate Base, Solvent Type (S/S by A-A-529) |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-W-6882 Revision F:1977 | WATER REPELLENT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC (S/S BY SAE-AS6882) |
| MIL-A-47284 Revision A:1991 | Adhesive, Epoxy Resin Base (S/S by A-A-59109) |
| MIL L 46138 : 0 | LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
| MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS (S/S BY SAE-AMS-T-23397) |
| MIL-C-47121 Base Document:1974 | Compound, Sealing, Polysulfide Rubber (No S/S Document) |
| SAE AMSR81835 | Remover, Organic Coating, Hot Tank Type |
| ANSI H35.1 : 2006 | ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.