SAE AMS2249G
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Chemical Check Analysis Limits Titanium and Titanium Alloys
Available format(s)
Hardcopy , PDF
Superseded date
02-07-2017
Superseded by
Language(s)
English
Published date
14-10-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification defines limits of variation for determining acceptability of the composition of cast or wrought titanium and titanium alloy parts and material acquired from a producer.
| SAE AMS4901T | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) |
| SAE AMS6945B | Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS 4966 : 2017 | TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS6935B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged |
| SAE AMS6951 | Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe Annealed |
| SAE AMST81556A | Titanium and Titanium Alloys, Extruded Bars and Shapes, Aircraft Quality |
| SAE AMS4962B | Titanium Alloy, Investment Castings 6Al - 4V Hot Isostatically Pressed |
| ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| SAE AMS4992B | Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed |
| SAE AMS6932B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 4.0V Extra Low Interstitial Annealed |
| SAE AMS4905F | Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V Beta Annealed |
| SAE AMS 4982 : 2015 | TITANIUM ALLOY WIRE, 44.5 CB |
| SAE AMS6926B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged |
| SAE AMS4933F | Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS4978H | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed |
| SAE AMS6946C | Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed |
| SAE AMS4908G | Titanium Alloy Sheet and Strip 8mn Annealed, 110 Ksi (760 Mpa) Yield Strength |
| SAE AMS4990C | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged |
| SAE AMS4965L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged |
| SAE AMS4976K | Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated |
| MIL-T-81556 Revision A:1983 | TITANIUM & TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| SAE AMS6901B | Titanium Alloy Bars, Forgings, and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4932C | Titanium Alloy Sheet 6Al - 4V Driver Sheet |
| SAE AMS4921N | Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength |
| SAE AMS6910B | Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS4987E | Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength |
| SAE AMS4907K | Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed |
| SAE AMS4975N | Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated |
| SAE AMS6949 | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
| SAE AMS4903C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM F 136 : 2013 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| SAE AMS4909K | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4916L | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS4951J | Titanium Welding Wire Commercially Pure Environment Controlled Packaging |
| SAE AMS 6953 : 2018 | TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED |
| SAE AMS4963D | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength |
| SAE AMS6947A | Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Treatable |
| ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| SAE AMS 6952 : 2018 | TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| SAE AMS4997B | Titanium Alloy, Powder 5Al 2Sn 2Zr 4Cr 4Mo 0.10O₂, Premium Quality |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| SAE AMST9046B | Titanium and Titanium Alloy, Sheet, Strip, and Plate |
| SAE AMS4944L | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| SAE AMS4930H | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed |
| SAE AMS4941G | Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength |
| SAE MAM4911B | Titanium Alloy, Sheet, Strip, and Plate, 6al 4v, Annealed |
| ASTM F 1472 : 2014 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| SAE AMS4935L | Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 2989 : 2013 : REDLINE | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| SAE AMS4940C | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength |
| SAE AMS6930E | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged |
| SAE AMS4955H | Titanium Alloy, Welding Wire 8Al - 1Mo - 1V |
| SAE AMS4928W | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
| SAE AMS6900B | Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed |
| SAE AMS 4922 : 2014 | TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED |
| SAE AMS4931E | Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness |
| SAE AMS4967L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable |
| SAE AMS4919H | Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed |
| ASTM F 1341 : 1999 | Standard Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications (Withdrawn 2006) |
| SAE AMS4946E | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved |
| SAE AMS4924H | Titanium Alloy Bars, Forgings, and Rings-15 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS 4985 : 2014 | TITANIUM ALLOY, INVESTMENT CASTINGS 6AL - 4V 130 UTS, 120 YS, 6% EL HOT ISOSTATICALLY PRESSED ANNEAL OPTIONAL OR WHEN SPECIFIED |
| ASTM F 1713 : 2008 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| SAE AMS6925B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated |
| SAE AMS4958E | Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished |
| SAE AMS4917J | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated |
| SAE AMS4899D | Titanium Alloy, Sheet, Strip, and Plate 4.5Al - 3V - 2Fe - 2Mo Annealed |
| SAE AMS4986E | Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength |
| SAE AMS4972H | Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS6921B | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged |
| SAE AMS6920C | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE AMS4942G | Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength |
| SAE AMS4994A | Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed |
| SAE AMS4993F | Titanium Alloy, Blended Powder Compacts, Sintered 6Al - 4V |
| SAE AMS4934G | Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged |
| ASTM F 1813 : 2013 : REDLINE | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| SAE AMS4937D | Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable |
| SAE AMS4973H | Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| ASTM F 2885 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| SAE AMS4979J | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated |
| SAE AMS 4998 : 2013 | TITANIUM ALLOY POWDER, 6Al - 4V |
| SAE AMS4939C | Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE AMS4926N | Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength |
| SAE AMS4970K | Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated |
| SAE AMS6950 | Titanium Alloy Bars, Forgings, and Forging Stock 4Al - 2.5V - 1.5 Fe Single Hearth Melted, Annealed |
| MIL-DTL-46077 Revision G:2006 | ARMOR PLATE, TITANIUM ALLOY, WELDABLE |
| SAE AMS6905B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed |
| SAE AMS4956G | Titanium Alloy Welding Wire 6Al – 4V, Extra Low Interstitial Environment Controlled Packaging |
| SAE AMS4920F | Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, Annealed |
| SAE AMS4915M | Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed |
| SAE AMS4897D | Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si |
| SAE AMS4989C | Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed |
| SAE AMS6948A | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed |
| SAE AMS4904C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged |
| SAE AMS4900P | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength |
| SAE AMS4952F | Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo |
| ASTM F 67 : 2013 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| SAE AMS4910R | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed |
| SAE AMS4954K | Titanium Alloy, Welding Wire 6Al - 4V |
| SAE AMS4988C | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated |
| SAE AMS4953G | Titanium Alloy Welding Wire 5Al - 2.5Sn |
| SAE AMS6907B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed |
| SAE AMS6936B | Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed |
| SAE AMS4983F | Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength |
| SAE AMS4981H | Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated |
| SAE AMS6906B | Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged |
| SAE AMS4943K | Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| SAE AMS6931D | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed |
| SAE AMS4991E | Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional |
| SAE AMS6915B | Titanium Alloy Bars, Forgings and Forging Stock 7.0Al - 4.0Mo Annealed |
| SAE AMS4914F | Titanium Alloy Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated |
| SAE AMS4957F | Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn |
| SAE AMS4902K | Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength |
| SAE AMS2368D | Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock |
| SAE AMS4918N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed |
| SAE AMS4950D | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength |
| SAE AMS4999A | Titanium Alloy Direct Deposited Products 6Al - 4V Annealed |
| SAE AMS4911P | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS4959G | Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper |
| SAE AMS4984F | Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength |
| ASTM F 2066 : 2018 : REDLINE | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.