SAE AMS 2252 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TOLERANCES - LOW-ALLOY STEEL SHEET, STRIP, AND PLATE
Hardcopy , PDF
07-10-2021
English
10-11-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. THICKNESS
4. WIDTH
5. LENGTH
6. CAMBER
7. FLATNESS
8. NOTES
Describes established inch/pound manufacturing tolerances which apply to low-alloy steel sheet, strip and plate of inch/pound dimensions.
Committee |
AMS-E
|
DevelopmentNote |
Supersedes SAE MAM 2252. (07/2007)
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
SAE AMS 6356 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO - (0.30 - 0.35C) (4132) |
SAE AMS 6350 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
SAE AMS 6351 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPHEROIDIZED |
MIL S 81081 : A | STEEL; SHEET, CHROMIUM NICKEL MOLYBDENUM VANADIUM (FOR TORPEDO MARK 46 MOD O) |
SAE AMS 6434 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
SAE AMS 6524 : 1991 | STEEL, SHEET, STRIP, AND PLATE 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C) CONSUMABLE ELECTRODE MELTED, ANNEALED |
SAE AMS6523J:2022 | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
SAE AMS 7713 : 2016 | IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED |
SAE AMS 6455 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
SAE AMS 6359 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
SAE AMS 6518 : 1987 | STEEL SHEET, STRIP, AND PLATE, MARAGING, 19NI - 3.0MO - 1.4TI - 0.10AL DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
SAE AMS 6439 : 2016 | STEEL SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.42 - 0.48C) (D6AC), CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
SAE AMS 6358 : 2016 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
SAE AMS 6385 : 2015 | STEEL SHEET, STRIP, AND PLATE, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.27 - 0.33C) |
SAE AMS 6520E : 2016 | STEEL, MARAGING, SHEET, STRIP, AND PLATE, 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED |
SAE AMS 6386 : 2016 | STEEL SHEET AND PLATE LOW ALLOY, HEAT TREATED 90,000 PSI (621 MPA) AND 100,000 PSI (690 MPA) YIELD STRENGTH |
MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
SAE AMS 6352 : 2013 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135) |
MIL-S-18729 Revision C:1965 | STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY |
SAE AMS 6438 : 2001(S2016) | STEEL, SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.45 - 0.50C) CONSUMABLE ELECTRODE VACUUM MELTED |
SAE AMS 6354 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C) |
SAE AMS 6433 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
SAE AMS 6437 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11) |
SAE AMS 6435 : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
SAE AMS 6522 : 2016 | STEEL PLATE 2.0CR - 10NI - 14CO - 1.0MO (0.13 - 0.17C) VACUUM MELTED, NORMALIZED, AND OVERAGED |
SAE AMS 6395 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) |
SAE AMS 6357 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
SAE AMS 6396 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) ANNEALED |
SAE AMS 6523H : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
SAE AMS 6454 : 2011 | STEEL, SHEET, STRIP, AND PLATE, 1.8NI - 0.80CR - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
SAE AMS 6345 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR OTHERWISE HEAT TREATED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.