SAE AMS 2422 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLATING, GOLD
Available format(s)
Hardcopy , PDF
Superseded date
15-07-2019
Superseded by
Language(s)
English
Published date
01-01-2014
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
NOTICE
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies the requirements for electrodeposited gold plate.
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| MIL G 45204 : C | Similar to |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-PRF-83726-35 Revision D:2013 | RELAYS, HYBRID, TIME DELAY (ON OPERATE), CLASS B, TYPE 1, HERMETICALLY SEALED, 4DPT, 10 AMPERES, FIXED TIME DELAY, 0.1 TO 600 SECONDS |
| MIL-PRF-83726-31 Revision K:2018 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| MIL-DTL-23971-5 Revision D:2013 | POWER DIVIDERS, N-WAY, O DEGREES, FLAT PACK |
| MIL-PRF-23419-8 Revision J:2012 | FUSE, CARTRIDGE, INSTRUMENT TYPE, STYLE FM08, (SUBMINIATURE - HIGH PERFORMANCE) |
| MIL-PRF-83726-29 Revision J:2013 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, DPDT, 10 AMPERES, FIXED TIME, 0.1 TO 500 SECONDS |
| MIL-PRF-83726-28 Revision K:2013 | Relays, Hybrid, Time Delay (on Operate), Class B, Type I, Hermetically Sealed, DPDT, 10 Amperes, Fixed Time, 0.1 to 500 Seconds |
| DSCC 04054 : 0 | RELAYS, ELECTROMAGNETIC, 25 AMPERES, 3 PDT, CONTINUOUS DUTY, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE, AC COIL |
| SAE AS 5363 : 2016 | ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| MIL-PRF-83726-30 Revision K:2018 | RELAY, HYBRID, TIME DELAY (ON OPERATE), CLASS B, TYPE 1, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS |
| MIL-PRF-83726-36 Revision D:2013 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, 4PDT, 10 AMPERES, FIXED TIME DELAY, 0.1 TO 600 SECONDS |
| MIL-PRF-23419-12 Revision E:2012 | Fuses, Instrument Type, Style FM12 (Subminiature - High Performance) |
| ARINC 810-5 : 2015 | DEFINITION OF STANDARD INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PHYSICAL INTERFACES |
| IEC 63004:2015 | Standard for receiver fixture interface |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| MIL-DTL-23971-1 Revision C:2017 | POWER DIVIDERS, 4 PORT QUADRATURE, SOLDER TERMINALS |
| DSCC 10012 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, GENERAL DRAWING |
| DSCC 11006 : 0 | PRINTED WIRING BOARD, FLEXIBLE RIGID FLEX, GENERAL DRAWING |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 2750 : 2012 | PYROMETRY |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| SAE AS 2390 : 2013(R2019) | CHEMICAL PROCESS TEST SPECIMEN MATERIAL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.