SAE AMS2475G
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Protective Treatments Magnesium Alloys
Superseded date
07-08-2020
Superseded by
Published date
18-12-2009
Publisher
Sorry this product is not available in your region.
This specification establishes the requirements for chromate conversion coatings on magnesium alloys.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification establishes the requirements for chromate conversion coatings on magnesium alloys.
| Standards | Relationship |
| MIL-M-3171 Revision C:1966 | Similar to |
| SAE AMS4490K | Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast |
| SAE AMS4362G | Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated |
| ASTM B 879 : 1997 : R2008 : EDT 1 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AMS 4483 : 2013 | MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD, 10AL (AM100A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE MAM4427A | Magnesium Alloy Sand Castings 4.0y 2.3nd 0.7zr Solution and Precipitation Heat Treated |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| MIL-DTL-9479 Revision E:1999 | |
| SAE AMS4420P | Magnesium Alloy Castings, Sand 6Al - 3Zn (AZ63A-F) As Cast |
| ASTM B 879 : 1997 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| SAE AMS2503G | Black Finishing Low Baking Enamel |
| SAE AMS4429A | Magnesium Alloy Castings, Sand 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat Treated |
| SAE AMS1431D | Compound, Solid Runway and Taxiway Deicing/Anti-Icing |
| SAE AMS4424L | Magnesium Alloy Castings, Sand 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated |
| SAE AMS1426D | Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol Base |
| SAE AMS4418H | Magnesium Alloy, Sand Castings 2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated |
| BS M 75:1994 | Aircraft de-icing/anti-icing Newtonian fluids, ISO type I |
| ASTM B 879 : 1997 : R2003 : EDT 1 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| SAE AMS3077 | COMPOUND, CORROSION PREVENTIVE Soft Film, Thixotropic, Cold Application- |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS4417C | Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated |
| SAE AMS4443H | Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated |
| SAE AMS2510F | Engine Gray Finishing Low Baking |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| SAE AMS 4484 : 2013 | MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| BS M 78:1995 | Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II |
| SAE AMS4439G | Magnesium Alloy Castings 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A-T5) Precipitation Heat Treated |
| SAE AMS 1388 : 2008 | REMOVER, TEMPORARY COATING, ALKALINE TYPE, WATER BASE |
| SAE AMS1374A | Remover, Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type |
| SAE AMS4452E | Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated |
| SAE AMS4442G | Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated |
| SAE AMS1536B | Cleaner for Aircraft Components Cold Tank Type, Solvent-Base |
| SAE AMS4453F | Magnesium Alloy, Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| SAE AMS4434N | Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated |
| SAE AMS4455G | Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS1659 | COATING, SOIL BARRIER Semi-Permanent |
| SAE AMS 4426 : 2013 | CASTINGS, SAND, MAGNESIUM ALLOY 5.1Y - 3.0RE - 0.70ZR (WE54-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| SAE AMS4427C | Magnesium Alloy Castings, Sand 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated |
| SAE AMS1424N | Fluid, Aircraft Deicing/Anti-Icing, SAE Type 1 |
| SAE AMS4444E | Magnesium Alloy Castings, Sand 6.0Zn - 0.80Zr (ZK61A-T5) Precipitation Heat Treated |
| SAE AMS1435C | Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways |
| SAE AMS4425D | Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated |
| SAE AS838A | Aircraft Hydraulic Starter/Pumps |
| SAE AMS4437F | Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged |
| ASTM B 879 : 1997 : R2013 | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| SAE AMS M 3171 : 1998 | MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.