|
SAE AMS 2762 : 2018
|
CARBURIZING - CARBON AND LOW-ALLOY STEEL PARTS |
|
SAE AMS 2759/7 : 2010
|
CARBURIZING AND HEAT TREATMENT OF CARBURIZING GRADE STEEL PARTS |
|
MIL-PRF-32405 Base Document:2013
|
CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
|
NASA PRC 2001 : 2011
|
PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF STEEL ALLOYS |
|
MIL-H-6875 Revision H:1989
|
HEAT TREATMENT OF STEEL RAW MATERIALS |
|
SAE AMS 2453 : 2015
|
LOW STRESS GRINDING OF STEEL PARTS HEAT TREATED TO 180 KSI OR OVER, AND LOW STRESS GRINDING OF CHROME PLATING APPLIED TO STEEL PARTS HEAT TREATED TO 180 KSI OR OVER |
|
16/30340711 DC : 0
|
BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
|
SAE AMS 2759/3 : 2015
|
HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS |
|
SAE AMS 2759/11 : 2005
|
STRESS RELIEF OF STEEL PARTS |
|
MIL-HDBK-1587 Base Document:1996
|
MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEM |
|
SAE AS 4444 : 2013
|
FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
|
SAE AS 4875 : 2016
|
FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
|
MIL-STD-1587 Revision D:2017
|
MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS |
|
SAE ARP 4715A : 2011(S2018)
|
INDUCTION HARDENING OF STEEL COMPONENTS |
|
SAE AMS 2757 : 2010
|
GASEOUS NITROCARBURIZING |
|
SAE AMS 5354 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 13CR - 2.0NI - 3.0W, HARDENED AND TEMPERED TO 32 - 38 HRC |
|
SAE MA 1573 : 2016
|
NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
|
SAE MA 4510 : 2015
|
FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
|
ASTM F 1940 : 2007 : REV A : R2014
|
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
|
SAE AS 4841 : 2017
|
FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
|
SAE AMS 2759/5 : 2004
|
HEAT TREATMENT, MARTENSITIC CORROSION-RESISTANT STEEL PARTS |
|
SAE AMS 5412 : 2012R(2018)
|
STEEL CASTINGS, VACUUM MELTED, VACUUM CAST, INVESTMENT, CORROSION RESISTANT 13CR - 8.0NI - 2.2MO - 1.1AI (195,000 PSI (1344 MPA) TENSILE STRENGTH (CONDITION H1000) HOMOGENIZED, SOLUTION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 2759/13 : 2018
|
GASEOUS NITROCARBURIZING |
|
SAE AMS 2759/6 : 2005
|
GAS NITRIDING OF LOW-ALLOY STEEL PARTS |
|
SAE AS 1424 : 2014
|
HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE |
|
ASTM F 1940 : 2007
|
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
|
SAE AMS 2759/4 : 2008
|
HEAT TREATMENT, AUSTENITIC CORROSION-RESISTANT STEEL PARTS |
|
PREN 16602-70-14 : DRAFT 2016
|
SPACE PRODUCT ASSURANCE - CORROSION |
|
ASTM F 1940 : 2007 : REV A
|
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
|
NASA MSFC SPEC 3635 : 2012
|
PYROTECHNIC SYSTEM SPECIFICATION |
|
NASA STD 6016(INT) : 2006
|
STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
|
NASA STD 5005 : 2013
|
STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
|
NASA KSC DE 512-SM : 2012
|
FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
|
NASA STD 6016 : 2016
|
STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
|
NASA JSC 27301 : 2009
|
MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
|
SAE AMS 2759/10 : 2014
|
AUTOMATED GASEOUS NITRIDING CONTROLLED BY NITRIDING POTENTIAL |
|
SAE AMS 2759/1 : 2009
|
HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL PARTS, MINIMUM TENSILE STRENGTH BELOW 220 KSI (1517 MPA) |
|
SAE AMS 2759/8 : 2007
|
ION NITRIDING |
|
SAE AS 4510 : 2013
|
FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
|
SAE AMS6474B:2008(S2018)
|
FORGINGS, HARDENABLE STEELS AND CORROSION-RESISTANT STEELS HEAT-TREATED, FINISHED-PART PROPERTIES SHORT-TRANSVERSE TENSILE STRENGTH AND FRACTURE TOUGHNESS |
|
SAE AMS 2821 : 2017
|
SALTS, HEAT-TREATING (FOR METALS) |
|
SAE AS 4842 : 2016
|
FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
|
SAE AS 4843 : 2016
|
FITTINGS, BEADED, FLUID CONNECTION |
|
SAE AMS 2745 : 2012
|
INDUCTION HARDENING OF STEEL PARTS |
|
SAE AMS 2759/2 : 2010
|
HEAT TREATMENT OF LOW-ALLOY STEEL PARTS MINIMUM TENSILE STRENGTH 220 KSI (1517 MPA) AND HIGHER |
|
SAE AMS 6523H : 2017
|
STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
|
SAE AMS 2376 : 2017
|
QUALIFICATION, APPROVAL, AND CONTROL OF PREMIUM-QUALITY FORGINGS ALLOY STEELS AND HEAT-TREATABLE CORROSION AND HEAT RESISTANT STEELS AND ALLOYS |
|
ASTM F 3184 : 2016
|
Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |