Skip to content
Please enter a keyword to search

  • SAE AS 4843 : 2016

    Current The latest, up-to-date edition.

    FITTINGS, BEADED, FLUID CONNECTION

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  06-06-2016

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. TECHNICAL REQUIREMENTS
    4. QUALITY ASSURANCE PROVISIONS
    5. PREPARATION FOR DELIVERY
    6. NOTES
    APPENDIX A

    Abstract - (Show below) - (Hide below)

    This SAE Aerospace Standard (AS) establishes the requirements for beaded fluid connection fittings (seeSection 6) for use in all types of fluid systems.

    General Product Information - (Show below) - (Hide below)

    Committee G-3
    Document Type Revision
    Publisher SAE International
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    AN849 Revision 13:2015 NIPPLE, HOSE
    AN815 Revision 10:2015 UNION - FLARED TUBE
    AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
    AN848 Revision 13:2015 Elbow, Hose, 90 Degree
    AN 839 : 0009 ELBOW, TUBE TO HOSE, 45 DEGREES
    SAE AS 4843/2 : 2016 FITTINGS, BEADED TO PIPE THREADED, FLUID CONNECTION
    SAE AS 4875/2 : 2016 FITTINGS, FLANGED TO BEADED, FLUID CONNECTION
    SAE AS 4843/1 : 2016 FITTINGS, BEADED TO 37 DEGREES FLARED, FLUID CONNECTION

    Standards Referencing This Book - (Show below) - (Hide below)

    SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
    SAE AMS QQ A 225/9 : 2014 ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
    MIL-PRF-6083 Revision G:2013 HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
    ASTM B 154 : 2016 : REDLINE Standard Test Method for Mercurous Nitrate Test for Copper Alloys
    SAE AMS QQ P 416 : 2016 PLATING, CADMIUM (ELECTRODEPOSITED)
    SAE AMS 2770 : 2015 HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS
    SAE AMS 6382 : 2014 STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
    SAE AMS 4141 : 2014 ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AMS 2759 : 2014 HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
    SAE AMS 4134 : 2012 ALUMINUM ALLOY, DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T4), SOLUTION HEAT TREATED
    SAE AMS QQ A 367 : 2012 ALUMINUM ALLOY FORGINGS
    MIL-DTL-83488 Revision D:1999 COATING, ALUMINUM, HIGH PURITY
    SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
    SAE AMS 2772 : 2016 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
    A-A-59133 Revision B:2010 CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER
    SAE AS 1376 : 2013 ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
    MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
    SAE AMS 2472 : 2014 ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING
    SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
    MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    SAE AMS 6370 : 2016 STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AS 5132 : 2015 FITTING END - HOSE CONNECTION, DESIGN STANDARD
    SAE AMS 4610 : 2014 BRASS, FREE-CUTTING BARS AND RODS 61.5CU - 35ZN - 3.1PB HALF HARD (H02)
    SAE AMS QQ A 225/6 : 1998 ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
    SAE AMS H 6875 : 2010 HEAT TREATMENT OF STEEL RAW MATERIALS
    SAE AMS 4339 : 2004 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED
    SAE ARP 4784 : 2013 DEFINITIONS AND LIMITS, METAL MATERIAL DEFECTS AND SURFACE AND EDGE FEATURES, FLUID COUPLINGS, FITTINGS AND HOSE ENDS
    SAE AS 478 : 2015 IDENTIFICATION MARKING METHODS
    SAE AMS 2658 : 2016 HARDNESS AND CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOY PARTS
    SAE ARP 9013 : 2005 STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
    SAE AMS 4124 : 2012 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective