SAE AMS2825B
Current
Current
The latest, up-to-date edition.
Material Safety Data Sheets
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
05-01-2010
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES
Defines requirements for preparing Material Safety Data Sheets for the provision of information concerning the harmful or hazardous nature of materials to facilitate purchaser's compliance with U.S. Department of Labor, Occupational Safety and Health Administration
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification has been declared \"CANCELLED\" by the Aerospace Materials Division, SAE, as of xxxx and has been superseded by ANSI Z400.1, Material Safety Data Sheets -Preparation. The requirements of the latest issue of ANSI Z400.1 shall be fulfilled whenever reference is made to the cancelled AMS2825. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by ANSI Z400.1.
| SAE AMS3821C | Cloth, Type \"E\" Glass, \"B\" Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant |
| SAE AMS1450A | Disinsectant (Insecticide), Aircraft |
| SAE AMS 1379 : 2007 | COMPOUND, ALKALINE RUST REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS3731C | Potting Compound, Epoxy Bisphenol A-Type |
| SAE AMS1384A | ACID, INHIBITED PHOSPHORIC Aircraft Turbine Engine Components Room Temperature Application |
| SAE AMS 3695 : 2014 | ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| SAE AMS1640B | Corrosion Removing Compound For Aircraft Surfaces |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| SAE AMS3126D | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| SAE AMS3572C | Resin Polyurethane, Foam-In-Place, Rigid |
| SAE AMS1428L | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AMS3023C | Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material |
| SAE AMS3733C | Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength |
| SAE AMS3831B | Cloth, Type “E” Glass, “B” Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant, Improved Strength |
| SAE AMS 3107 : 1983(R2014) | PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| SAE AMS1426D | Fluid, Deicing/Anti-Icing, Runways and Taxiways Glycol Base |
| SAE AMS3826C | Cloth, Type “E” Glass “B” Stage Polyester Resin Impregnated 1581 and 7781 Type Fabric |
| SAE AMS1535C | Cleaner, Transparent Plastic |
| SAE AMS1725C | Skin Protective Compound, Chemical Barrier |
| SAE AMS3897A | Cloth, Carbon Fiber, Resin Impregnated |
| SAE AMS2535B | Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for Microcircuits |
| SAE AMS1545B | Cleaner, Thrust Reverser Alkaline, Water-Base |
| SAE AMS1550B | Cleaner, Water Base, Aircraft interior Hard Surface Materials |
| SAE AMS3603A | Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications |
| SAE AMS3828D | Glass Roving, Epoxy Resin Preimpregnated Type E Glass |
| SAE AMS3619E | Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F) |
| SAE AMS 3688 : 2014 | ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL, -55 DEGREES C TO +82 DEGREES C (-65 DEGREES F TO +180 DEGREES F) |
| SAE AMS 3689 : 2014 | ADHESIVE, FOAMING, HONEYCOMB, CORE SPLICE, STRUCTURAL, -54 TO +177 DEGREES C (-65 TO +350 DEGREES F) |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| SAE AMS1431D | Compound, Solid Runway and Taxiway Deicing/Anti-Icing |
| SAE AMS3753C | Microspheres, Carbon Hollow |
| SAE AMS 3686 : 2014 | ADHESIVE, POLYIMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F) |
| SAE AMS1383A | Oxide Conditioner, Alkaline Permanganate Aircraft Turbine Engine Components |
| SAE AMS1380A | SCALE CONDITIONER, ALKALINE Aircraft Turbine Engine Components |
| SAE AMS 1320 : 1995 | REMOVER, DECAL ADHESIVE |
| SAE AMS3906C | Glass Tape and Flat Sheet, Non-Woven Cloth Epoxy Resin Impregnated, For Hand and Machine Layup |
| SAE AMS3023B | Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material |
| SAE AMS3829C | Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated |
| SAE AMS 3729 : 2014 | EPOXY RESIN MATRIX, THERMOSETTING MODERATE TEMPERATURE RESISTANT, UNFILLED |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
| SAE AMS3847D | Cloth, Quartz, \"B\" Stage Polyimide Resin Impregnated Style 581 Fabric, 315 °C (599 °F) |
| MIL-PRF-46190 Revision A:1997 | PREPEGS, WOVEN FABRIC, CARBON FIBER, RESIN IMPREGNATED |
| SAE AMSI83387B | Inspection Process, Magnetic Rubber |
| SAE AMS3845C | Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated |
| SAE AMS3159G | Leak Test Solution Liquid Oxygen Compatible |
| SAE AMS3077 | COMPOUND, CORROSION PREVENTIVE Soft Film, Thixotropic, Cold Application- |
| SAE AMS1382A | OXIDE REMOVER COMPOUND, ACIDIC Aircraft Turbine Engine Components |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS3834B | Cloth, Type “E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant, Improved Strength |
| SAE AMS3021E | Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material |
| SAE AMS3844C | Cloth, Type \"E\" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
| SAE AMS3359C | Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa·s) Viscosity |
| SAE AMS 1385 : 2004 | COMPOUND, HOT CARBON AND PAINT REMOVER AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS1370A | Compound, Rust Remover, Liquid Aircraft and Aerospace Components, Immersion Tank Method |
| SAE AMS 3705 : 2014 | EPOXY RESIN, CYCLOALIPHATIC LIQUID |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| SAE AMS3091C | Mold Release Agent |
| SAE AMS3681F | Adhesive, Electrically Conductive Silver-Filled Epoxy Resin |
| SAE AMS 3692 : 2014 | ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION |
| SAE AMS 3109 : 2014 | PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F) |
| SAE AMS3732B | Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| SAE AMS 3185 : 1999 | HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE |
| SAE AMS1376B | Remover, Epoxy Paint Acid-Type, Thickened |
| SAE AMS1386A | Compound, Silicone Rubber Remover Aircraft Turbine Engine Components Room Temperature Application |
| SAE AMS3020A | Oil, Reference, for “L” Stock Rubber Testing |
| SAE AMS 1388 : 2008 | REMOVER, TEMPORARY COATING, ALKALINE TYPE, WATER BASE |
| SAE AMS3867C | Boron Filament Tape, Epoxy-Resin-Impregnated |
| SAE AMS1374A | Remover, Polyurethane/Epoxy Paint Alkaline, Hot-Tank Type |
| SAE AMS3895C | Broadgoods and Tape, Carbon Fiber-Epoxy Resin Impregnated Multi-Ply, Uniform Fiber |
| SAE AMS3267B | Sealing Compound, Low Adhesion, Corrosion Inhibiting, for Removable Panels and Fuel Tank Inspection Plates |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| SAE AMS3849C | Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
| SAE AMS3704A | Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified |
| SAE AMS3259B | Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C) |
| SAE AMS1539 | CLEANING COMPOUND, TERPENE Circuit Board Cleaner |
| SAE AMS3894F | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated |
| SAE AMS1371 | Compound, Rust Remover, Solid/Powder Aircraft and Aerospace Components, Immersion Tank Method |
| SAE MAM3053A | Grease, Water Resistant Polyalphaolefin Base |
| SAE AMS1378A | COMPOUND, CARBON SOIL AND PAINT REMOVER Aircraft Turbine Engine Components Room Temperature Application |
| SAE AMS1387B | Remover, Anti-Galling Compound Aircraft Turbine Engine Components Room Temperature Application |
| SAE AMS3085A | Fluid, Reference for Testing AS5780 HPC Class (Polyol) Resistant Material (Also known as Eastman Reference Oil 300) |
| MIL L 46197 : (1) | LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED |
| SAE AMS3684C | Resin, Polyimide, Sealing High-Temperature Resistant, 315 °C (600 °F) Unfilled |
| SAE AMS 3728 : 2014 | EPOXY CRESOL NOVOLAC RESIN LOW MOLECULAR WEIGHT |
| SAE AMS1659 | COATING, SOIL BARRIER Semi-Permanent |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| SAE AMS1540C | Cleaner, Thrust Reverser Water-Base |
| SAE AMS1435C | Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways |
| SAE AMS3144 | Primer, Anodic Electrodeposition for Aircraft Applications |
| SAE AMS1451B | Disinfectant, Aircraft For Use in Cargo Compartments |
| SAE ARP4118A | Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair |
| SAE AMS3136F | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150 °C (302 °F) Cure |
| SAE AMS3827C | Cloth, Type \"E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant |
| SAE ARP 1611 : 2014 | QUALITY INSPECTION PROCEDURE, COMPOSITES TRACER FLUOROSCOPY AND RADIOGRAPHY |
| SAE AMS3167B | Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds |
| SAE AMS1541C | Cleaner, Fuel Drop Tank Water-Soluble |
| SAE AMS3705A | Epoxy Resin, Cycloaliphatic Liquid |
| SAE AMS3021G | Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material |
| SAE AMS1454A | Cleaning/Scale Removing Compound Aircraft Vacuum Toilet Systems |
| SAE AMS1541D | Cleaner, Fuel Drop Tank Water Soluble |
| SAE AS5272F | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.