SAE AMS03_4A
Current
The latest, up-to-date edition.
The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
Hardcopy , PDF
English
21-03-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. WARNING
3. NORMATIVE REFERENCES
4. DEFINITIONS
5. INFORMATION TO BE SUPPLIED BY THE PURCHASER
6. PROCESS CONTROL
7. RECOMMENDATIONS FOR DESIGN AND MANUFACTURE
8. PHYSICAL PREPARATION
9. CLEANING
10. PROTECTIVE TREATMENTS
11. INSPECTION AND TESTING
12. NOTES
ANNEX A - METHOD FOR DETERMINING OXIDIZABLE
MATERIAL IN SULFURIC ACID
Provides the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa.
| DevelopmentNote |
Supersedes DEFSTAN 03-4/6(2011). (05/2015)
|
| DocumentType |
Standard
|
| Pages |
19
|
| ProductNote |
THIS STANDARD IS NOW STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
| DEFSTAN 03-032(PT6)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| SAE AMS03_11A | Phosphate Treatment of Iron and Steel |
| SAE AMS03_9A | Electro-Deposition of Silver |
| SAE AMS03_19A | Electro-Deposition of Cadmium |
| SAE AMS03_14A | Electrodeposition of Chromium for Engineering Purposes |
| SAE AMS 03-040 : 2017 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| SAE AMS03_20A | Electro-Deposition of Zinc |
| SAE AMS03_17A | Electro-Deposition of Gold |
| SAE AMS03_2A | Cleaning and Preparation of Metal Surfaces |
| SAE AMS03_27A | Electro-Deposition of Nickel for Engineering Purposes |
| DEFSTAN 03-30/3(2005) : 2005 | TREATMENTS FOR THE PROTECTION FOR METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION |
| DEFSTAN 03-11/5(2008) : 2008 | PHOSPHATE TREATMENT OF IRON AND STEEL |
| DEFSTAN 80-206/3(2009) : 2009 | PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| BS 4921:1988 | Specification for sherardized coatings on iron or steel |
| DEFSTAN 03-27/3(2005) : 2005 | ELECTRO-DEPOSITION OF NICKEL FOR ENGINEERING PURPOSES |
| DEFSTAN 03-36/2(2010) : 2010 | GUIDANCE TO THE USE OF CADMIUM ALTERNATIVES IN THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| DEFSTAN 80-207/3(2009) : 2009 | PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| BS 2X 34:1998 | Specification for two component polyurethane finish for aerospace purposes |
| DEFSTAN 80-54/5(2010) : 2010 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 03-14/4(2008) : 2008 | ELECTRODEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES |
| BS EN 2828:1993 | Adhesion test for metallic coatings by burnishing |
| BS EN ISO 6507-1:2005 | Metallic materials. Vickers hardness test Test method |
| BS EN 2832:1993 | Hydrogen embrittlement of steels. Notched specimen test |
| BS 7195(1989) : 1989 | GUIDE FOR PREVENTION OF CORROSION OF METALS CAUSED BY VAPOURS FROM ORGANIC MATERIALS |
| SAE AMS03_9 | Electro-Deposition of Silver |
| DEFSTAN 03-9/3(2007) : 2007 | ELECTRO-DEPOSITION OF SILVER |
| SAE AMS03_17 | Electro-Deposition of Gold |
| DEFSTAN 80-208/3(2005) : 2005 | PAINT FINISHING, POLYURETHANE MULTI-PACK, MATT, IRR, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC |
| DEFSTAN 03-38/2(2010) : 2010 | GUIDANCE TO THE USE OF ALTERNATIVES TO HEXAVALENT CHROMIUM FOR THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| BS EN 2829:1995 | Adhesion test for metallic coatings by shot peening |
| SAE AMS03_27 | Electro-Deposition of Nickel for Engineering Purposes |
| SAE AMS03_11 | Phosphate Treatment of Iron and Steel |
| BS M 37:1970 | Method for the etch inspection of metallic materials and components |
| DEFSTAN 03-17/3(2007) : 2007 | ELECTRO-DEPOSITION OF GOLD |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| SAE AMS03_14 | Electrodeposition of Chromium for Engineering Purposes |
| DEFSTAN 03-2/6(2011) : 2011 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 80-161/2(2002) : 2002 | PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK |
| DEFSTAN 03-31/1(1993) : 1993 | A GUIDE TO THE USE OF CHROMIUM PLATING FOR ENGINEERING PURPOSES |
| SAE AMS03_19 | Electro-Deposition of Cadmium |
| SAE AMS03_2A | Cleaning and Preparation of Metal Surfaces |
| BS EN 2831:1993 | Hydrogen embrittlement of steels. Test by slow bending |
| DEFSTAN 91-70/1(1990) : 1990 | CUTTING FLUID, SOLUBLE, BIOSTABLE - JOINT SERVICE DESIGNATION ZX-9 |
| DEFSTAN 00-970/1(1983) : 1983 | DESIGN REQUIREMENTS FOR SERVICE AIRCRAFT |
| DEFSTAN 03-21/5(2011) : 2011 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| BS 2X 33:1998 | Specification for two component epoxy primer for aerospace purposes |
| BS EN 2830:1993 | Adhesion test for metallic coatings by shearing action |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| DEFSTAN 03-20/3(2005) : 2005 | ELECTRO-DEPOSITION OF ZINC |
| DEFSTAN 03-19/4(2010) : 2010 | ELECTRO-DEPOSITION OF CADMIUM |
| SAE AMS03_20 | Electro-Deposition of Zinc |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.