SAE AMS2249G
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHEMICAL CHECK ANALYSIS LIMITS, TITANIUM AND TITANIUM ALLOYS
Available format(s)
Hardcopy , PDF
Superseded date
02-07-2017
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 4901 : 2015 | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 70.0 KSI (485 MPA) |
| SAE AMS 6945 : 2014 | TITANIUM ALLOY, SINGLE MELT, SHEET, STRIP, AND PLATE 6AL - 4V ANNEALED |
| SAE AMS 4966 : 2017 | TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS 6935 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 6.0V - 2.0SN, SOLUTION HEAT TREATED AND AGED |
| SAE AMS 6951 : 2017 | TITANIUM ALLOY, SHEET 5AL - 4V - 0.75MO - 0.5FE ANNEALED |
| SAE AMS T 81556 : 2001 | TITANIUM AND TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| SAE AMS 4962 : 2016 | TITANIUM ALLOY, INVESTMENT CASTINGS, 6 AL - 4 V HOT ISOSTATICALLY PRESSED |
| ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| SAE AMS 4992 : 2014 | CASTING, STRUCTURAL INVESTMENT, TITANIUM ALLOY 6AL - 4V HOT ISOSTATICALLY PRESSED |
| SAE AMS 6932 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V EXTRA LOW INTERSTITIAL, ANNEALED |
| SAE AMS 4905 : 2017 | TITANIUM ALLOY, DAMAGE-TOLERANT GRADE PLATE, 6AL - 4V, BETA ANNEALED |
| SAE AMS 4982 : 2015 | TITANIUM ALLOY WIRE, 44.5 CB |
| SAE AMS 6926 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED AND AGED |
| SAE AMS4933F : 2017 | TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 8AL - 1MO - 1V SOLUTION HEAT TREATED AND STABILIZED |
| SAE AMS4978H | TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED |
| SAE AMS 6946 : 2014 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 4AL - 2.5V - 1.5FE, ANNEALED |
| SAE AMS4908G | TITANIUM ALLOY, SHEET AND STRIP 8MN ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS4990C | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED AND AGED |
| SAE AMS4965L | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4976 : 2017 | TITANIUM ALLOY, FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 08SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| MIL-T-81556 Revision A:1983 | TITANIUM & TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| SAE AMS 6901 : 2015 | TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED |
| SAE AMS 4932 : 2015 | TITANIUM ALLOY SHEET, 6AL - 4V, DRIVER SHEET |
| SAE AMS 4921 : 2016 | TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH |
| SAE AMS 6910 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 8AL - 1MO - 1V, DUPLEX ANNEALED |
| SAE AMS 4987 : 2015 | TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AI, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 140 KSI (965 MPA) TENSILE STRENGTH |
| SAE AMS4907K | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6.0AL - 4.0V, EXTRA LOW INTERSTITIAL, ANNEALED |
| SAE AMS4975N | TITANIUM ALLOY, BARS, WIRE, AND RINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 0.08SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS6949 | TITANIUM ALLOY, SHEET AND STRIP, 4AL - 2.5V - 1.5FE, ELECTRON BEAM SINGLE MELTED. ANNEALED |
| SAE AMS 4903 : 2015 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM F 136 : 2013 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| SAE AMS4909K | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED |
| SAE AMS4916L | TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1MO - 1V DUPLEX ANNEALED |
| SAE AMS4951J | TITANIUM WELDING WIRE COMMERCIALLY PURE ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6953 : 2018 | TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED |
| SAE AMS 4963 : 2016 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, ANNEALED, HEAT TREATABLE, MODIFIED STRENGTH |
| SAE AMS 6947 : 2015 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE ANNEALED, HEAT TREATABLE |
| ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| SAE AMS 6952 : 2018 | TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| SAE AMS 4997 : 1977 | TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| SAE AMS T 9046 : 2006 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| SAE AMS4930H | TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 4V, EXTRA LOW INTERSTITIAL, ANNEALED |
| SAE AMS4941G | TITANIUM TUBING, WELDED, 40 KSI (276 MPA) YIELD STRENGTH |
| SAE MAM 4911 : 1994 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4V, ANNEALED |
| ASTM F 1472 : 2014 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| SAE AMS4935L | TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 4V, ANNEALED, BETA PROCESSED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 2989 : 2013 : REDLINE | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| SAE AMS 4940 : 2017 | TITANIUM SHEET, STRIP, AND PLATE COMMERCIALLY PURE ANNEALED, 25.0 KSI (172 MPA) YIELD STRENGTH |
| SAE AMS 6930 : 2014 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED |
| SAE AMS4955H | TITANIUM ALLOY, WELDING WIRE 8AL - 1MO - 1V |
| SAE AMS4928W | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
| SAE AMS 6900 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 5AL - 2.5SN, ANNEALED |
| SAE AMS 4922 : 2014 | TITANIUM ALLOY, SEAMLESS, HYDRAULIC TUBING 15V - 3.0CR - 3.0AL - 3.0SN COLD WORKED AND PRECIPITATION HEAT TREATED |
| SAE AMS 4931 : 2015 | TITANIUM ALLOY BARS, FORGINGS, AND RINGS, 6AL - 4V EXTRA LOW INTERSTITIAL (ELI), DUPLEX ANNEALED, FRACTURE TOUGHNESS |
| SAE AMS4967L | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE |
| SAE AMS 4919 : 2014 | TITANIUM ALLOY SHEET, STRIP, AND PLATE 6AL - 2SN - 4ZR - 2MO - 0.08SI DUPLEX ANNEALED |
| ASTM F 1341 : 1999 | Standard Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications (Withdrawn 2006) |
| SAE AMS 4946 : 2016 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED |
| SAE AMS4924H | TITANIUM ALLOY BARS, FORGINGS, AND RINGS-15, 5AL - 2.5SN, EXTRA LOW INTERSTITIAL, ANNEALED |
| SAE AMS 4985 : 2014 | TITANIUM ALLOY, INVESTMENT CASTINGS 6AL - 4V 130 UTS, 120 YS, 6% EL HOT ISOSTATICALLY PRESSED ANNEAL OPTIONAL OR WHEN SPECIFIED |
| ASTM F 1713 : 2008 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| SAE AMS 6925 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED |
| SAE AMS4958E : 2017 | TITANIUM ALLOY BARS AND RODS, 3AL - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND CENTERLESS GROUND OR PEELED AND POLISHED |
| SAE AMS 4917 : 2017 | TITANIUM ALLOY SHEET, STRIP, AND PLATE 13.5V - 11CR - 3.0AL - SOLUTION HEAT TREATED |
| SAE AMS 4899 : 2016 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 4.5AI - 3V - 2FE - 2MO, ANNEALED |
| SAE AMS 4986 : 2015 | TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 160 KSI (1103 MPA) TENSILE STRENGTH |
| SAE AMS 4972 : 2015 | TITANIUM ALLOY BARS, WIRE, AND RINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED |
| SAE AMS 6921 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED AND AGED |
| SAE AMS 6920 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED |
| SAE AMS4942G | TITANIUM TUBING, SEAMLESS, ANNEALED, 40.0 KSI (275 MPA) YIELD STRENGTH |
| SAE AMS 4994 : 2015 | TITANIUM ALLOY POWDERED METAL PRODUCTS, 6AL - 4V, HOT ISOSTATICALLY PRESSED, ANNEALED |
| SAE AMS 4993F : 2017 | TITANIUM ALLOY, BLENDED POWDER COMPACTS, SINTERED, 6AL - 4V |
| SAE AMS4934G | TITANIUM ALLOY, EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 4V, SOLUTION HEAT TREATED AND AGED |
| ASTM F 1813 : 2013 : REDLINE | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| SAE AMS 4937 : 2014 | TITANIUM ALLOY, EXTRUSIONS AND FLASH WELDED RINGS, 6AL - 6V - 2SN, BETA EXTRUDED PLUS ANNEALED, HEAT TREATABLE |
| SAE AMS 4973 : 2016 | TITANIUM ALLOY FORGINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED |
| ASTM F 2885 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| SAE AMS 4979J : 2017 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4998 : 2013 | TITANIUM ALLOY POWDER, 6Al - 4V |
| SAE AMS 4939C : 2017 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED |
| SAE AMS4926N | TITANIUM ALLOY, BARS, WIRE, AND RINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS 4970 : 2016 | TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7AL - 4MO SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 6950 : 2017 | TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 4AL - 2.5V - 1.5 FE SINGLE HEARTH MELTED, ANNEALED |
| MIL-DTL-46077 Revision G:2006 | ARMOR PLATE, TITANIUM ALLOY, WELDABLE |
| SAE AMS 6905 : 2014 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 2.0MO, DUPLEX ANNEALED |
| SAE AMS 4956 : 2016 | TITANIUM ALLOY WELDING WIRE, 6AL - 4V, EXTRA LOW INTERSTITIAL, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 4920 : 2015 | TITANIUM ALLOY, FORGINGS, 6AI - 4V, ALPHA-BETA OR BETA PROCESSED, ANNEALED |
| SAE AMS4915M | TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1V - 1MO SINGLE ANNEALED |
| SAE AMS4897D : 2016 | TITANIUM ALLOY, SHEET AND STRIP, 15MO - 3.0AL - 2.8CB - 0.20SI |
| SAE AMS 4989 : 2014 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 3AL - 2.5V, ANNEALED |
| SAE AMS 6948 : 2015 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE, ANNEALED |
| SAE AMS 4904 : 2015 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 4V, SOLUTION HEAT TREATED AND AGED |
| SAE AMS4900P | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 55.0 KSI (379 MPA) YIELD STRENGTH |
| SAE AMS 4952 : 2015 | TITANIUM ALLOY, WELDING WIRE, 6AI - 2SN - 4ZR - 2MO |
| ASTM F 67 : 2013 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| SAE AMS4910R | TITANIUM ALLOY, SHEET, STRIP, AND PLATE 5AL - 2.5SN ANNEALED |
| SAE AMS4954K | TITANIUM ALLOY, WELDING WIRE 6AL - 4V |
| SAE AMS 4988 : 2014 | TITANIUM ALLOY SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, SOLUTION HEAT TREATED |
| SAE AMS4953G | TITANIUM ALLOY WELDING WIRE, 5AL - 2.5SN |
| SAE AMS 6907 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, DUPLEX ANNEALED |
| SAE AMS 6936 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6AL - 6V - 2SN, ANNEALED |
| SAE AMS 4983 : 2015 | TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND AGED, 180 KSI (1241 MPA) TENSILE STRENGTH |
| SAE AMS4981H | TITANIUM ALLOY BARS, WIRE, AND FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS6906B | TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION HEAT TREATED AND AGED |
| SAE AMS4943K | TITANIUM ALLOY, HYDRAULIC, SEAMLESS TUBING, 3.0AL - 2.5V, ANNEALED |
| SAE AS 7101 : 2007 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
| SAE AMS 6931 : 2017 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED |
| SAE AMS 4991 : 2014 | TITANIUM ALLOY CASTINGS, INVESTMENT 6AL - 4V HOT ISOSTATIC PRESSED, ANNEAL OPTIONAL |
| SAE AMS 6915 : 2015 | TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 7.0AL - 4.0MO, ANNEALED |
| SAE AMS 4914 : 2014 | TITANIUM ALLOY COLD ROLLED SHEET AND STRIP, 15V - 3AL - 3CR - 3SN, SOLUTION HEAT TREATED |
| SAE AMS4957F | TITANIUM ALLOY, ROUND BAR AND WIRE, 3AI - 8V - 6CR - 4MO - 4ZR, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND COLD DRAWN |
| SAE AMS 4902 : 2013 | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY-PURE, ANNEALED 40.0 KSI (276 MPA) YIELD STRENGTH |
| SAE AMS 2368 : 2017 | SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK |
| SAE AMS4918N | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 6V - 2SN, ANNEALED |
| SAE AMS 4950 : 2015 | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED, MODIFIED STRENGTH |
| SAE AMS 4999 : 2016 | TITANIUM ALLOY DIRECT DEPOSITED PRODUCTS, 6AL - 4V, ANNEALED |
| SAE AMS4911P | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
| SAE AMS4959G | TITANIUM ALLOY WIRE 13.5V - 11CR - 3AL SPRING TEMPER |
| SAE AMS 4984F : 2015 | TITANIUM ALLOY FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND AGED, 173 KSI (1193 MPA) TENSILE STRENGTH |
| ASTM F 2066 : 2018 : REDLINE | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.