SAE AMS2279B
Current
The latest, up-to-date edition.
1 SCOPE
2 SHEET AND STRIP
3 EXTRUSIONS
4 NOTES
Specifies established inch/pound manufacturing tolerances applicable to non-cellular rubber products ordered to inch/pound dimensions.
| DocumentType |
Standard
|
| ProductNote |
THIS STANDARD IS STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification covers established inch/pound manufacturing tolerances applicable to non-cellular rubber products ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term \"exclusive\" applies only to the higher figure of the specified range.
| SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
| SAE AMS3331C | Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75 Shore A Hardness For Products in Fuel Systems/Lubricating Oils |
| SAE AMS3210H | Chloroprene (CR) Rubber Electrical Resistant 65 - 75 |
| SAE AMS3357G | RUBBER, SILICONE (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75 |
| SAE AMS3218D | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
| SAE AMS3213M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 |
| SAE AMS3227H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 |
| SAE AMS3208N | Chloroprene (CR) Rubber Weather Resistant 45 - 55 |
| SAE AMS3332F | Silicone Rubber Extreme Low-Temperature Resistant 15 - 30 |
| SAE AMS3348D | Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35 |
| SAE AMS3216H | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 |
| SAE AMS3337F | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75 |
| SAE AMS3304H | Silicone, Rubber General Purpose 70 Durometer |
| SAE AMS3353A | Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems |
| SAE AMS3334F | Silicone Rubber Extreme Low-Temperature Resistant 35 - 45 |
| SAE AMS3384 | Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems |
| SAE AMS3301H | Silicone, Rubber General Purpose 40 Durometer |
| SAE AMS3325F | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 – 65 |
| SAE AMS3349D | Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 |
| SAE AMS3305J | Silicone, Rubber General Purpose 80 Durometer |
| SAE AMS3209M | Chloroprene (CR) Rubber Weather Resistant 65 - 75 |
| SAE AMS3338G | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85 |
| SAE AMS3238H | Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 |
| SAE AMS7338 | Rubber: Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness For Seals In Hydraulic Systems, etc. |
| SAE AMS3226H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55 |
| SAE AMS3345F | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer |
| SAE AMS3212P | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65 |
| SAE AMS3329C | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45 – 55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS / LUBRICATING OILS |
| SAE AMS3347C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 – 55 |
| SAE AMS3205M | Synthetic Rubber Low-Temperature Resistant 45 - 55 |
| SAE AMS3306C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 |
| SAE AMS3346G | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer |
| SAE AMS3328C | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 – 45 |
| SAE AMS3330C | Elastomer: Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 – 55 For Products in Fuel Systems/Lubricating Oils |
| SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
| SAE AMS3237F | Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45 |
| SAE AMS3215M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 |
| SAE AMS3356F | Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65 |
| SAE AMS3207N | Chloroprene (CR) Rubber Weather Resistant 25 - 35 |
| SAE AMS3382D | Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness |
| SAE AMS3325H | Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 55 - 65 Durometer Type ‘A’ Hardness For Products in Fuel Systems / Lubrication Oils |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.