SAE AMS2350BA
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standards and Test Methods
Available format(s)
Hardcopy , PDF
Withdrawn date
01-10-1989
Language(s)
English
Published date
01-10-1989
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Withdrawn
|
To establish the issue of specifications, standards, and recommended practices published by standardizing agencies other than divisions and committees of the Aerospace Council of SAE approved for use in determining conformance to requirements of Aerospace Material Specifications (AMS) and other specifications in which this specification is referenced.
| SAE AMS3821C | CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED 7781 STYLE FABRIC, FLAME RESISTANT |
| SAE AMS4226B | ALUMINUM ALLOY CASTINGS, HIGH STRENGTH, 5.0CU - 0.35MN - 0.18ZR - 0.10V (224.0), SOLUTION AND PRECIPITATION HEAT TREATED (OVERAGED) |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| SAE AMS3823E | CLOTH, GLASS, STYLE 7781, CHROME-SILANE FINISH |
| SAE AMS3077 | COMPOUND, CORROSION PREVENTIVE Soft Film, Thixotropic, Cold Application- |
| SAE AMS 3695 : 2014 | ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| SAE AMS7849E | TANTALUM SHEET, STRIP, AND PLATE, ANNEALED |
| SAE AMS4222H | ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED |
| SAE AMS 3912 : 2014 | RADOMES, FOAM SANDWICH, POLYIMIDE/QUARTZ CLOTH CONSTRUCTION |
| SAE AMS3833B | CLOTH, BROADCLOTH, POLYESTER/COTTON POLYESTER FILAMENT, END TO END, (DURABLE PRESS) |
| SAE AMS7724D | ALLOY SHEET AND STRIP, SINTERED WIRE MESH, CORROSION AND HEAT RESISTANT, 30FE - 1.5MN - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA) - 0.15N, POROUS |
| SAE MA 1573 : 2016 | NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AMS6426F | STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS5530H | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 58NI - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS1640B | Corrosion Removing Compound For Aircraft Surfaces |
| SAE AMS4750E | SOLDER, TIN-LEAD, 45SN - 55PB |
| SAE ARP 1612 : 2014 | POLYIMIDE PRINTED CIRCUIT BOARDS, FABRICATION OF |
| SAE AMS6521C | STEEL SHEET, STRIP, AND PLATE, MARAGING - 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL, CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED |
| SAE AMS4012G | ALUMINUM SHEET, LAMINATED, EDGE BONDED |
| SAE MA 4070 : 2013 | PINS, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS3794B | THREAD, ARAMID, SPUN STAPLE |
| SAE AMS6443G | STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS3126D | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| SAE AMS3572C | RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID |
| SAE AMS2640K | MAGNETIC PARTICLE INSPECTION |
| SAE AMS3020A | OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING |
| SAE AMS3733C | POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH |
| SAE AMS4000F | ALUMINUM SHEET AND PLATE (1060-0) |
| SAE AMS7898D | Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought |
| SAE AMS1725C | SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER |
| SAE AMS3795B | WEBBING, WOVEN NYLON FABRIC |
| SAE AMS4997B | TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY |
| SAE AMS3625D | ELASTOMERIC TUBING, ELECTRICAL INSULATION, CROSSLINKED SILICONE, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE, 1.750 TO 1 SHRINK RATIO |
| SAE ARP 1842 : 2013 | SURFACE PREPARATION FOR STRUCTURAL ADHESIVE BONDING, ALUMINUM ALLOY AND LOW ALLOY STEEL PARTS |
| SAE MA 1784 : 2012 | SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS5750D | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 4632 : 2001 | ALUMINUM BRONZE BARS AND RODS 90CU - 8.5A1, HARD |
| SAE MA 1937 : 2018 | NUT, HEX, FREE RUNNING, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS5373E | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 16CO - 29CR - 4.5W, AS CAST, UNS R30006 |
| SAE AMS6432C | STEEL BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.43-0.49C) |
| SAE AMS1775B | FABRIC, NYLON UPHOLSTERY, FIRE RETARDANT |
| SAE AMS5672D | STEEL WIRE, CORROSION RESISTANT, 11.8CR - 8.5NI - 0.30(CB + TA) - 1.1TI - 2.0CU, PRECIPITATION HARDENABLE, SPRING TEMPER |
| SAE AMS5328E | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED |
| SAE ARP 1674 : 1988 | AUTOMATED MANUFACTURE OF CONTINUOUS MULTI-PLY CARBON FIBER/EPOXY RESIN IMPREGNATED BROADGOODS |
| SAE AMS6518C | STEEL SHEET, STRIP, AND PLATE, MARAGING, 19NI - 3.0MO - 1.4TI - 0.10AL DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
| SAE AMS4575F | NICKEL-COPPER ALLOY TUBING, BRAZED, CORROSION RESISTANT, 67NI - 31CU, ANNEALED |
| SAE AMS3676D | INSULATION, SOUND AND THERMAL, RESIN-BONDED GLASS FIBER, MEDIUM FILAMENT |
| SAE AMS 3688 : 2014 | ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL, -55 DEGREES C TO +82 DEGREES C (-65 DEGREES F TO +180 DEGREES F) |
| SAE AMS2405D | ELECTROLESS NICKEL PLATING, LOW PHOSPHORUS |
| SAE AMS3894F | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated |
| SAE AMS7440E | BALLS, STEEL, LOW-CHROMIUM, HIGH CARBON HARDENED AND TEMPERED |
| SAE AMS 3689 : 2014 | ADHESIVE, FOAMING, HONEYCOMB, CORE SPLICE, STRUCTURAL, -54 TO +177 DEGREES C (-65 TO +350 DEGREES F) |
| SAE AMS4824E | BEARINGS, BABBITT-COATED LEADED-BRONZE STEEL BACK |
| SAE AMS 3903 : 2013 | CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS, EPOXY RESIN IMPREGNATED |
| SAE AMS5351G | STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED |
| SAE AMS5358D | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 18CR - 9NI, SOLUTION HEAT TREATED |
| SAE AMS3816D | BRAID, FLAT, NYLON, ELECTRICAL TYING - WAX COATED |
| SAE AMS3809A | TAPE, ADHESIVE, PRESSURE-SENSITIVE, DOUBLE-FACED, CARPET TIE DOWN |
| SAE AMS5316E | Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast |
| SAE AMS 1534 : 2013 | CLEANER, AIRCRAFT GLASS WINDOW |
| SAE AMS5375F | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65.5CO - 25CR - 1.8NI - 5.0W AS CAST |
| SAE MA 1568 : 2018 | NUT, SELF LOCKING - UNS S66286, 425 DEGREE C AND 650 DEGREE C, 1100 MPA, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS5348C | STEEL CASTINGS, TUBULAR, CENTRIFUGAL, CORROSION RESISTANT, 15CR - 4.6NI - 0.22 (CB+TA) - 2.8CU, SOLUTION HEAT TREATED |
| SAE AMS 3897 : 2016 | CLOTH, CARBON FIBER, RESIN IMPREGNATED |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| SAE AMS 5409 : 1984 | ALLOY CASTING, INVESTMENT, CORROSION AND HEAT RESISTANT 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.8CB - 3.4TI - 1.8TA - 3.4A1- 0.010B - 0.06ZR (0.03 - 0.08C), VACUUM MELTED, VACUUM CAST, AS CAST |
| SAE AMS4051G | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 6.8ZN - 2.8MG - 2.0CU - 0.23CR (ALCLAD 7178-0) ANNEALED |
| SAE AMS3870E | CERAMIC MOLDINGS AND EXTRUSIONS, DENSE, ULTRA-HIGH ALUMINA (99% AL[2]O[3]) |
| SAE AMS7304F | SPRINGS, STEEL, 0.85 - 1.05C, HARDENED AND TEMPERED AFTER FORMING |
| SAE AMS6386D | STEEL SHEET AND PLATE LOW ALLOY, HEAT TREATED 90,000 PSI (621 MPA) AND 100,000 PSI (690 MPA) YIELD STRENGTH |
| SAE AMS3796B | WEBBING, NYLON, AIRCRAFT ARRESTING |
| SAE AMS4023F | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 1.0MG - 0.60SI - 0.28CU - 0.20CR (ALCLAD 6061; -T6 SHEET, -T651 PLATE) |
| SAE AMS5330E | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED |
| SAE AMS5036H | STEEL SHEET AND STRIP, ALUMINUM COATED, LOW CARBON |
| SAE AMS3834B | CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH |
| SAE AMS3813B | ROPE, ARAMID FIBER, JACKETED FOR ANTENNA-SUPPORT SYSTEMS |
| SAE AMS2510F | ENGINE GRAY FINISHING LOW BAKING |
| SAE AMS5549H | STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED |
| SAE AMS5315E | DUCTILE (NODULAR) IRON CASTINGS, SAND, 60,000 PSI (415 MPA) TENSILE STRENGTH, FERRITIZE ANNEALED |
| SAE AMS3804E | CLOTH, AIRPLANE, COTTON, MERCERIZED, 65 POUNDS (290 N) BREAKING STRENGTH |
| SAE AMS4231G | CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5341D | STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT, 19.5CR - 10.5NI - 0.25S (TYPE 303), SOLUTION HEAT TREATED |
| SAE AMS3582B | PLASTIC TUBING, ELECTRICAL INSULATION - CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO |
| SAE MA 4035 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS2421C | PLATING MAGNESIUM FOR SOLDERABILITY - ZINC IMMERSION PROCESS |
| SAE AMS3732B | POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE |
| SAE AMS5683G | ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT, 75NI - 15.5CR - 8.0FE |
| SAE AMS5384F | ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT, 53NI - 18CR - 18CO - 4.0MO - 2.9TI - 2.9AL - 0.006B, VACUUM-MELTED, VACUUM-CAST, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS7264A | RINGS, SEALING, SILICONE RUBBER, HIGH TEMPERATURE RESISTANT, LOW COMPRESSION SET, 65 - 75 |
| SAE AMS4240G | CASTINGS, SAND - 10MG, SOLUTION HEAT TREATED & NATURALLY AGED |
| SAE AMS4631F | ALUMINUM BRONZE RODS, BARS, AND FORGINGS, 90.5CU - 7.5AL - 1.95: STRESS RELIEVED |
| SAE MA 1547 : 2012 | WRENCHES, TWELVE SPLINE, METRIC |
| SAE AMS3802F | CLOTH, AIRPLANE, COTTON, MERCERIZED, 50 POUNDS (220 N) BREAKING STRENGTH |
| SAE AMS4908G | TITANIUM ALLOY, SHEET AND STRIP 8MN ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS3818B | BRAID, FLAT, POLYESTER, LACING AND TYING, SYNTHETIC RUBBER COATED, LOW OUTGASSING |
| SAE AMS3856B | CLOTH, UPHOLSTERY, FLAME RESISTANT |
| SAE AMS5751F | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 7262 : C2001 | RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER, PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT, 85-95 |
| SAE AMS3843D | POLYTETRAFLUOROETHYLENE SHEET, ASBESTOS FIBER REINFORCED, HIGH COMPRESSIBILITY, LOW DENSITY |
| SAE AMS5795G | IRON ALLOY, CORROSION AND HEAT RESISTANT, COVERED, WELDING ELECTRODES, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA) |
| SAE AMS7464D | BOLTS AND SCREWS, STEEL, LOW-ALLOY HEAT RESISTANT, 222,000 PSI (1517 MPA) TENSILE STRENGTH, HARDENED AND TEMPERED, ROLL THREADED |
| SAE AMS4176C | Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5056, 350 (175) |
| SAE AMS7878C | TUNGSTEN CARBIDE POWDER, COBALT COATED |
| SAE AMS3815E | BRAID, FLAT, NYLON, ELECTRICAL TYING SYNTHETIC RUBBER COATED |
| SAE AMS3145D | PAINT, MARKING EPOXY |
| SAE AMS5852D | Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Powder Metallurgy Product, Hot Isostatically Pressed |
| SAE AMS5550F | ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT, 80NI - 15.5CR - 0.62TI - 3.25AL, ANNEALED |
| SAE AMS2690D | PARALLEL GAP, WELDING, MICROELECTRONIC INTERCONNECTIONS TO THIN FILM SUBSTRATES |
| SAE AMS7466B | Bolts and Screws Nickel Alloy, Corrosion and Heat Resistant, Upset Headed, Roll Threaded, Fatigue Resistant |
| SAE AMS2399A | ELECTROLESS NICKEL-BORON PLATING |
| SAE AS 1613 : 2012 | IMAGE QUALITY INDICATOR, RADIOGRAPHIC |
| SAE AMS1450A | Disinsectant (Insecticide), Aircraft |
| SAE AMS4805F | BEARINGS, SINTERED METAL POWDER, 89CU - 10SN, OIL IMPREGNATED |
| SAE MAM5706C | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| SAE AMS5363F | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 10.5NI - 0.90 (CB+TA), SOLUTION HEAT TREATED |
| SAE AMS7817B | MOLYBDENUM ALLOY SHEET, STRIP, AND PLATE, 0.48TI - 0.090ZR - 0.02C, ARC CAST, STRESS RELIEVED |
| SAE AMS3731C | POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE |
| SAE AMS3684C | RESIN, POLYIMIDE, SEALING HIGH-TEMPERATURE RESISTANT, 315 DEGREES C (600 DEGREES F) UNFILLED |
| SAE AIR 3260 : 2012 | IDENTIFICATION OF STANDARD UTILITY PARTS - BOLTS AND NUTS |
| SAE AMS5735J | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.30V 1800° F (982.2° C) Solution and Precipitation Heat Treated |
| SAE AMS7488F | RINGS, FLASH WELDED, ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS2689B | FUSION WELDING TITANIUM AND TITANIUM ALLOYS |
| SAE AMS5389D | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED |
| SAE AMS3880D | CRYSTALLIZED GLASS CERAMIC |
| SAE AMS2550F | TREATMENT OF SHEET METAL PARTS, CORROSION-RESISTANT STEEL |
| SAE AMS3800B | CLOTH, KNITTED, POLYAMIDE, HIGH TEMPERATURE RESISTANT, REVERSE JERSEY |
| SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
| SAE AMS3841B | CLOTH, COTTON TWILL, FIRE RETARDANT TREATED |
| SAE AMS4275E | CASTINGS, PERMANENT MOLD, 6.2SN - 1CU - 1NI, STRESS RELIEVED |
| SAE AMS5031G | WELDING ELECTRODES, COVERED, STEEL - 0.07 - 0.15C |
| SAE AMS3229J | ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL RESISTANT, LOW SWELL, 75-85 |
| SAE AMS5691H | STEEL WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT, 18.5CR - 12.5NI - 2.5MO |
| SAE AMS6442G | STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS |
| SAE AMS3081B | ANTI SCUFFING TREATMENT, GRAPHITE VARNISH |
| SAE AMS4227E | ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST |
| SAE AMS1451B | Disinfectant, Aircraft For Use in Cargo Compartments |
| SAE AMS1548B | CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
| SAE AMS5395D | ALLOY IRON CASTINGS, DUCTILE, SAND, CORROSION RESISTANT, 22NI (2.5 - 3.0C), AS CAST |
| MA1784A : 2018 | Spacers and Washers, Procurement Specification for, Metric |
| SAE AMS 7245 : F1993 | INSERTS, THREAD FORM, CORROSION RESISTANT STEEL - 18CR 9.2NI |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.