SAE AMS2368D
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
Available format(s)
Hardcopy , PDF
Superseded date
08-07-2022
Superseded by
Language(s)
English
Published date
03-03-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a standard set of procedures for sampling and testing to meet the requirements of material specifications for wrought titanium and titanium alloy products, except forgings and forging stock.
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification provides a standard set of procedures for sampling and testing to meet the requirements of material specifications for wrought titanium and titanium alloy products, except forgings and forging stock. It is applicable to the extent specified in a material specification.
| SAE AMS4901T | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) |
| SAE AMS6945B | Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS6935B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged |
| SAE AMS6926B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged |
| SAE AMS4933F | Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS6946C | Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed |
| SAE AMS6901B | Titanium Alloy Bars, Forgings, and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4921N | Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength |
| SAE AMS6910B | Titanium Alloy Bars, Forgings and Forging Stock 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS6915B | Titanium Alloy Bars, Forgings and Forging Stock 7.0Al - 4.0Mo Annealed |
| SAE AMS6949 | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
| SAE AMS4903C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated |
| SAE AMS4909K | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4916L | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS 6953 : 2018 | TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED |
| SAE AMS4963D | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength |
| SAE AMS6947A | Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Treatable |
| SAE AMS4898D | Titanium Alloy, Sheet 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si Annealed |
| SAE AMS4941G | Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength |
| SAE AMS4940C | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength |
| SAE AMS6930E | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged |
| SAE AMS4955H | Titanium Alloy, Welding Wire 8Al - 1Mo - 1V |
| SAE AMS6900B | Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed |
| SAE AMS4910R | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed |
| SAE AMS4978H | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed |
| SAE AMS4919H | Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed |
| SAE AMS4943K | Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed |
| SAE AMS4958E | Titanium Alloy Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished |
| SAE AMS4917J | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated |
| SAE AMS4899D | Titanium Alloy, Sheet, Strip, and Plate 4.5Al - 3V - 2Fe - 2Mo Annealed |
| SAE AMS4972H | Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS6931D | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed |
| SAE AMS6921B | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged |
| SAE AMS6920C | Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE AMS4942G | Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength |
| SAE AMS4971L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable |
| SAE AMS4937D | Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable |
| SAE AMS4979J | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated |
| SAE AMS4939C | Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE AMS4926N | Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength |
| SAE AMS4970K | Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated |
| SAE AMS6950 | Titanium Alloy Bars, Forgings, and Forging Stock 4Al - 2.5V - 1.5 Fe Single Hearth Melted, Annealed |
| SAE AMS6905B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed |
| SAE AMS6951 | Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe Annealed |
| SAE AMS4915M | Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed |
| SAE AMS4897D | Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si |
| SAE AMS6925B | Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated |
| SAE AMS4989C | Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed |
| SAE AMS6948A | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed |
| SAE AMS4904C | Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated and Aged |
| SAE AMS4900P | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength |
| SAE AMS4988C | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated |
| SAE AMS6907B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed |
| SAE AMS6932B | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 4.0V Extra Low Interstitial Annealed |
| SAE AMS4931E | Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness |
| SAE AMS6936B | Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed |
| SAE AMS4981H | Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated |
| SAE AMS6906B | Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged |
| SAE AMS4914F | Titanium Alloy Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated |
| SAE AMS4924H | Titanium Alloy Bars, Forgings, and Rings-15 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4918N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed |
| SAE AMS4911P | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS6940B | Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V Annealed |
| SAE AMS6949A | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
| SAE AMS6906C | Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged |
| SAE AMS2801B | Heat Treatment of Titanium Alloy Parts |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| SAE AMS 2632 : 1995 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ASTM E 2994 : 2016 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| ASTM E 1409 : 2013 : REDLINE | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| SAE AMS2631D | Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| SAE AMS2249G | Chemical Check Analysis Limits Titanium and Titanium Alloys |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
| SAE AMS 2634 : 2013 | ULTRASONIC INSPECTION, THIN WALL METAL TUBING |
| ASTM E 1450 : 2016 : REDLINE | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.