SAE AMS2400X
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLATING, CADMIUM
Hardcopy , PDF
17-07-2020
English
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
NOTICE
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies the requirements for electrodeposited cadmium on metal parts.
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| QQ-P-416 Revision F:1991 | Similar to |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| FF-R-556 Revision D:1981 | RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE |
| SAE MA1565C | Inserts, Screw Thread, Helical Coil Metric Series Procurement Specification For |
| MIL-P-10971 Revision E:1969 | PIN, SPRING, TUBULAR (COILED AND SLOTTED) |
| SAE AS1349B | INSERT, SCREW THREAD, HELICAL COIL, LOCKING (LOW FRICTION SYSTEMS), PERFORMANCE STANDARD FOR |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| SAE AS 838 : 2013 | AIRCRAFT HYDRAULIC STARTER/PUMPS |
| SAE MA 1573 : 2016 | NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
| SAE AMS2503G | BLACK FINISHING - LOW BAKING ENAMEL |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| MIL-PRF-25567 Revision E:1998 | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS |
| SAE AMS3159G | LEAK TEST SOLUTION - LIQUID OXYGEN COMPATIBLE |
| SAE AS 7252 : 2015 | NUTS, SELF-LOCKING, STEEL HIGH STRENGTH, ALL METAL 450 DEGREES F USE, UN AND UNJ THREAD FORM |
| SAE AMS1548B | CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
| SAE AMS2510F | ENGINE GRAY FINISHING LOW BAKING |
| SAE ARP 1755 : 2000 | EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD |
| SAE AMS3259B | SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C) |
| SAE AS1229D | INSERT, SCREW THREAD, HELICAL COIL, STUD LOCKING, PERFORMANCE STANDARD FOR |
| SAE AS 7225 : 2015 | RIVETS, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AS 7240 : 2015 | WASHERS, SPRING LOCK, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
| AN103901THRUAN104000 Revision 3:1986 | BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24 |
| SAE AMS3529B | PLASTIC SHEET AND FILM, VINYL COPOLYMERS, UNPLASTICIZED |
| SAE AMS2451/4C | PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| SAE AMS2759/9D | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| SAE AS 2390 : 2013(R2019) | CHEMICAL PROCESS TEST SPECIMEN MATERIAL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.