SAE AMS2404G
NA
NA
Status of Standard is Unknown
PLATING, ELECTROLESS NICKEL
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This specification covers the requirements for electroless nickel deposited on various materials.
| Committee |
AMS B
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
| DSCC 04028 : 0 | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS |
| DSCC 93006 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS |
| DSCC 93007 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| NASA PRC 5007 : 2012 | PROCESS SPECIFICATION FOR ELECTROLESS NICKEL PLATING |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| DSCC 93012 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS |
| AWS C3.5 : 1999 | SPECIFICATION FOR INDUCTION BRAZING |
| AWS C3.4M/C3.4 : 2016 | SPECIFICATION FOR TORCH BRAZING |
| DSCC 93002 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| A-A-59590 Revision D:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| DSCC 02007 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS |
| DSCC 89017 : D | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2 |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| DSCC 04027 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-STD-1516 Revision B:1990 | UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL |
| DSCC 93005 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| SAE AS 81659 : 2017 | CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
| AWS C3.4 : 1999 | SPECIFICATION FOR TORCH BRAZING |
| AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-122 Revision B:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING) |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| MIL-DTL-23971-5 Revision D:2013 | POWER DIVIDERS, N-WAY, O DEGREES, FLAT PACK |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| SAE AS 4941 : 2015 | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| DSCC 93004 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS |
| DSCC 93013 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND |
| A-A-55563 Revision D:2013 | Holder, Electrical Card, Metal Card Guide, General Requirements for |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| DSCC 93011 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| SAE AS 19692 : 2016 | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA JSC 27301 : 2009 | MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| AWS C3.6M/C3.6 : 2016 | SPECIFICATION FOR FURNACE BRAZING |
| MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| DSCC 03023 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS |
| MIL-DTL-83733 Revision E:2006 | CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| DSCC 93009 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
| AWS C3.11M/C3.11:2011 | SPECIFICATION FOR TORCH SOLDERING |
| ASTM B 656 : 1991 | Standard Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use (Withdrawn 2000) |
| MIL-DTL-7793 Revision H:2016 | METER, TIME TOTALIZING |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| AWS C3.9M/C3.9 : 2009 | SPECIFICATION FOR RESISTANCE BRAZING |
| DSCC 93010 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-28754-67 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, CENTER |
| DSCC 93003 : C | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS |
| MIL-DTL-28754-70 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, SINGLE SPAN, CENTER |
| MIL-DTL-28754-68 Revision A:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, T-DIP |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| DSCC 89015 : E | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREE, CATEGORY 3C (FOR MIL-DTL-38999 SERIES 1 AND 2) |
| AWS C3.5M/C3.5 : 2016 | SPECIFICATION FOR INDUCTION BRAZING |
| DSCC 93008 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.