SAE AMS2825B
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
MATERIAL SAFETY DATA SHEETS
Available format(s)
Hardcopy , PDF
Superseded date
05-01-2010
Language(s)
English
Published date
01-01-1987
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES
Defines requirements for preparing Material Safety Data Sheets for the provision of information concerning the harmful or hazardous nature of materials to facilitate purchaser's compliance with U.S. Department of Labor, Occupational Safety and Health Administration
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SAE AMS3821C | CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED 7781 STYLE FABRIC, FLAME RESISTANT |
| SAE AMS 1450 : 1998 | DISINFECTANT (INSECTICIDE), AIRCRAFT |
| SAE AMS 1379 : 2007 | COMPOUND, ALKALINE RUST REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS 3731 : 2016 | POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE |
| SAE AMS 1384 : 2007 | ACID, INHIBITED PHOSPHORIC AIRCRAFT TURBINE ENGINE COMPONENTS ROOM TEMPERATURE APPLICATION |
| SAE AMS 3695 : 2014 | ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| SAE AMS 1640 : 2011 | CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| SAE AS 5272 : 2016 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
| SAE AMS 3126 : 2013 | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| SAE AMS 3572 : 2016 | RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID |
| SAE AMS1428L:2023 | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AMS3023C:2022 | Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material |
| SAE AMS 3733 : 2015 | POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH |
| SAE AMS 3831 : 2016 | CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH |
| SAE AMS 3107 : 1983(R2014) | PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| SAE AMS 1426 : 2016 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE |
| SAE AMS3826C | CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER RESIN IMPREGNATED, 1581 AND 7781 TYPE FABRIC |
| SAE AMS 1535C : 2008 | CLEANER, TRANSPARENT PLASTIC |
| SAE AMS 1725 : 1986 | SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER |
| SAE AMS 3897 : 2016 | CLOTH, CARBON FIBER, RESIN IMPREGNATED |
| SAE AMS 2535 : 2015 | COATING, VAPOR DEPOSITED POLY-MONOCHLORO-PARA-XYLYLENE FOR MICROCIRCUITS |
| SAE AMS 1545 : 2015 | CLEANER, THRUST REVERSER, ALKALINE, WATER-BASE |
| SAE AMS1550B | CLEANER, WATER BASE, AIRCRAFT INTERIOR HARD SURFACE MATERIALS |
| SAE AMS 3603 : 2002 | PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
| SAE AMS3828D | GLASS ROVING, EPOXY RESIN PREIMPREGNATED, TYPE E GLASS |
| SAE AMS 3619 : 2016 | RESIN, POLYIMIDE, LAMINATING, HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F) |
| SAE AMS 3688 : 2014 | ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL, -55 DEGREES C TO +82 DEGREES C (-65 DEGREES F TO +180 DEGREES F) |
| SAE AMS 3689 : 2014 | ADHESIVE, FOAMING, HONEYCOMB, CORE SPLICE, STRUCTURAL, -54 TO +177 DEGREES C (-65 TO +350 DEGREES F) |
| SAE AMS 3100 : 2013 | ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS |
| SAE AMS 1431 : 2012 | COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING |
| SAE AMS 3753 : 2016 | MICROSPHERES, CARBON, HOLLOW |
| SAE AMS 3686 : 2014 | ADHESIVE, POLYIMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F) |
| SAE AMS 1383 : 2007 | OXIDE CONDITIONER, ALKALINE PERMANGANATE AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS 1380 : 2007 | SCALE CONDITIONER, ALKALINE, AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS 1320 : 1995 | REMOVER, DECAL ADHESIVE |
| SAE AMS3906C | GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP |
| SAE AMS 3023 : 2017 | FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL |
| SAE AMS 3829 : 2016 | CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED |
| SAE AMS 3729 : 2014 | EPOXY RESIN MATRIX, THERMOSETTING MODERATE TEMPERATURE RESISTANT, UNFILLED |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
| SAE AMS3847D | CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F) |
| MIL-PRF-46190 Revision A:1997 | PREPEGS, WOVEN FABRIC, CARBON FIBER, RESIN IMPREGNATED |
| SAE AMS I 83387 : 2016 | INSPECTION PROCESS, MAGNETIC RUBBER |
| SAE AMS3845C | CLOTH, TYPE 'E' GLASS, 'B' STAGE ADDITION CURE POLYIMIDE-RESIN-IMPREGNATED |
| SAE AMS3159G | LEAK TEST SOLUTION - LIQUID OXYGEN COMPATIBLE |
| SAE AMS 3077 A : 1994(S2018) | COMPOUND, CORROSION PREVENTIVE, SOFT FILM, THIXOTROPIC, COLD APPLICATION |
| SAE AMS 1382 : 2007 | OXIDE REMOVER COMPOUND, ACIDIC AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| SAE AMS 3834 : 2016 | CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH |
| SAE AMS 3021 : 2017 | FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL |
| SAE AMS 3844 : 2016 | Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
| SAE AMS 1526 : 2008 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
| SAE AMS3359C | SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY |
| SAE AMS 1385 : 2004 | COMPOUND, HOT CARBON AND PAINT REMOVER AIRCRAFT TURBINE ENGINE COMPONENTS |
| SAE AMS 1370 : 2008 | COMPOUND, RUST REMOVER, LIQUID, AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD |
| SAE AMS 3705 : 2014 | EPOXY RESIN, CYCLOALIPHATIC LIQUID |
| SAE AMS 1548 : 2017 | CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| SAE AMS3091C | MOLD RELEASE AGENT |
| SAE AMS3681F | ADHESIVE, ELECTRICALLY CONDUCTIVE, SILVER-FILLED EPOXY RESIN |
| SAE AMS 3692 : 2014 | ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION |
| SAE AMS 3109 : 2014 | PRIMER, ADHESIVE, ELECTRODEPOSITED -55 TO +82 DEGREES C (-67 TO +180 DEGREES F) |
| SAE AMS 3732 : 2015 | POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| SAE AMS 3185 : 1999 | HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE |
| SAE AMS1376B | REMOVER, EPOXY PAINT, ACID TYPE, THICKENED |
| SAE AMS 1386 : 2004 | COMPOUND, SILICONE RUBBER REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATIONS |
| SAE AMS3020A | OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING |
| SAE AMS 1388 : 2008 | REMOVER, TEMPORARY COATING, ALKALINE TYPE, WATER BASE |
| SAE AMS3867C | BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED |
| SAE AMS 1374 : 2004 | REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE |
| SAE AMS 3895 : 2016 | BROADGOODS AND TAPE, CARBON FIBER-EPOXY RESIN IMPREGNATED MULTI-PLY, UNIFORM FIBER |
| SAE AMS 3267 : 1992 | SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
| SAE AMS 3849 : 2016 | CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED |
| SAE AMS 3704 : 2016 | ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED |
| SAE AMS 3259 : 1997 | SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C) |
| SAE AMS 1539:1996(S2018) | CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER |
| SAE AMS3894F | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated |
| SAE AMS 1371 : 2007 | COMPOUND, RUST REMOVER, SOLID/POWDER AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD |
| SAE MAM 3053 : 2012 | GREASE, WATER RESISTANT POLYALPHAOLEFIN BASE |
| SAE AMS 1378 : 1995 | COMPOUND, CARBON SOIL AND PAINT REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION |
| SAE AMS 1387B : 2004(S2018) | REMOVER, ANTI GALLING COMPOUND, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION |
| SAE AMS 3085 : 2016 | FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300) |
| MIL L 46197 : (1) | LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED |
| SAE AMS3684C | RESIN, POLYIMIDE, SEALING HIGH-TEMPERATURE RESISTANT, 315 DEGREES C (600 DEGREES F) UNFILLED |
| SAE AMS 3728 : 2014 | EPOXY CRESOL NOVOLAC RESIN LOW MOLECULAR WEIGHT |
| SAE AMS 1659 : 1991 | COATING, SOIL BARRIER, SEMI-PERMANENT |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| SAE AMS 1540 : 2015 | CLEANER, THRUST REVERSER, WATER-BASE |
| SAE AMS 1435 : 2012 | FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| SAE AMS 1451 : 1998 | DISINFECTANT, AIRCRAFT FOR USE IN CARGO COMPARTMENTS |
| SAE ARP 4118 : 2013 | ISOLATION AND CORROSION PROTECTION OF DISSIMILAR MATERIALS, CARBON COMPOSITE STRUCTURE REPAIR |
| SAE AMS3136F | COATING MATERIAL, PHENOLIC RESIN, PTFE FILLED PIGMENTED, 150 DEGREE C (302 DEGREE F) CURE |
| SAE AMS3827C | Cloth, Type "E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant |
| SAE ARP 1611 : 2014 | QUALITY INSPECTION PROCEDURE, COMPOSITES TRACER FLUOROSCOPY AND RADIOGRAPHY |
| SAE AMS 3167 : 2005 | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| SAE AMS 1541 : 2005 | CLEANER, FUEL DROP TANK, WATER-SOLUBLE |
| SAE AMS3705A:2014(R2022) | Epoxy Resin, Cycloaliphatic Liquid |
| SAE AMS3021G:2024 | Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material |
| SAE AMS1454A:2010(S2023) | Cleaning/Scale Removing Compound Aircraft Vacuum Toilet Systems |
| SAE AMS1541D:2005(S2023) | Cleaner, Fuel Drop Tank Water Soluble |
| SAE AS5272F:2021 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.