SAE AMS3263A
Current
The latest, up-to-date edition.
Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant with Intermittent Use to 400°CF (204°CC)
Hardcopy , PDF
English
13-12-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
1.1 Form
1.2 Application
1.3 Classification
1.4 Safety-hazardous materials
2 Applicable documents
2.1 SAE publications
2.2 ASTM publications
2.3 U.S. Government publications
2.4 AIAA publications
3 Technical requirements
3.1 Materials
3.2 Properties
3.3 Shelf life
3.4 Quality
4 Quality assurance provisions
4.1 Responsibility for inspection
4.2 Classification of tests
4.3 Sampling and testing
4.4 Approval
4.5 Test methods
4.6 Reports
4.7 Re-sampling and retesting
5 Preparation for delivery
5.1 Packaging
5.2 Identification
6 Acknowledgement
7 Rejections
8 Notes
Describes two classes of a fuel resistant polythioether sealing compound supplied as a two-component system.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
SAE International
|
| Status |
Current
|
this specification covers two classes of a guel resistant polythioether sealing compound supplied as a two-component system.
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| SAE AMS4049M | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| SAE AMS3276F | SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-A-9962 Revision A:1966 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| SAE AMS3819C | CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| SAE AS7202 | NATIONAL AERSPACE AND DEFENSE CONTRACTORS ACCREDDITATION PROGRAM (NADCAP)REQUIREMENTS FOR ACCREDITATION OF VALUE ADDED DISTRIBUTORS |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| SAE AMS4037Q | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS4045L | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| SAE AMS5516P | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| SAE AS7003D | NADCAP PROGRAM REQUIREMENTS |
| MIL-STD-453 Revision C:1984 | INSPECTION, RADIOGRAPHIC |
| SAE AS7001 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)PROGRAM DESCRIPTION |
| SAE AS7002 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)RULES FOR IMPLEMENTATION |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| CCC-C-419 Revision G:1989 | CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED |
| SAE AS7201 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)REQUIREMENTS FOR ACCREDITATION OF PASS-THRU DISTRIBUTORS |
| MIL-C-38736 Revision B Base Document:1984 | CLEANING COMPOUND, SOLVENT MIXTURES (METRIC) |
| MIL-C-38334 Revision A:1971 | CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
| PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
| SAE AMS2629E | FLUID, JET REFERENCE |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| NAS679:2010 | NUT, SELF-LOCKING, HEXAGON, LOW HEIGHT |
| MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
| SAE AMS2471H | ANODIC TREATMENT OF ALUMINUM ALLOYS SULFURIC ACID PROCESS, UNDYED COATING |
| SAE AS7200/1A | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM |
| SAE AMS4901T | TITANIUM SHEET, STRIP, AND PLATE, COMMERCIALLY PURE, ANNEALED, 70.0 KSI (485 MPA) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.