SAE AMS5510S
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated
Hardcopy , PDF
20-02-2023
English
10-06-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat-resistant steel in the form of sheet, strip, and plate.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate.
| MIL-PRF-81329 Revision E:2015 | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737 |
| MIL-DTL-85052-14 Base Document:2017 | Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced |
| MIL-STD-1881 Base Document:1983 | BRAZING SILVER, GENERAL PROCESS FOR |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| SAE ARP699E | High Temperature Pneumatic Duct Systems for Aircraft |
| SAE AS 4751 : 2005 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
| SAE AS85449A | Clamp Assembly, Saddle Type, Cushioned, General Specification For |
| MIL-PRF-7907 Revision C:2007 | Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
| SAE AMS2437C | Coating, Plasma Spray Deposition |
| MIL-DTL-85052-12 Base Document:2017 | Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone |
| MIL-DTL-85052-11 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| SAE AS1553A | Performance Standard for Tube Support Loop-Cushioned Clamp |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| SAE AMS 3411 : 2016 | FLUX, SILVER BRAZING HIGH TEMPERATURE |
| MIL-DTL-85052-15 Base Document:2017 | Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE) |
| SAE MA2151 | Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric |
| MIL-STD-1877 Revision B:1990 | BRAZING, NICKEL, HIGH TEMPERATURE VACUUM |
| MIL-DTL-85052-13 Base Document:2017 | Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene |
| SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| MIL-DTL-85052-16 Base Document:2017 | Clamp, Loop, Stainless Steel, 275 Degrees Fahrenheit, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant |
| SAE MA2150 | Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric |
| SAE AMS 3410 : 2016 | FLUX, SILVER BRAZING |
| SAE AS1424G | Hose Assemblies, Metal, Medium Pressure, High Temperature |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AS4194A | Sheet and Strip Surface Finish Nomenclature |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS 2242 : 2014 | TOLERANCES, CORROSION AND HEAT RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY SHEET, STRIP, AND PLATE |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.