SAE AMS5561G
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
Available format(s)
Hardcopy , PDF
Superseded date
23-10-2021
Superseded by
Language(s)
English
Published date
12-10-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
This specification covers a corrosion and heat-resistant steel in the form of welded and drawn or seamless and drawn tubing.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| SAE MA614A | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
| NASA SSTD 8070 0037 : 2014 | ASME PROCEDURE FOR WELDING NITRONIC 40 STAINLESS STEEL ALLOY |
| MIL-H-5440 Revision H:1993 | HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| SAE ARP 4698 : 2013 | GUIDE FOR CHOOSING A MINIMUM WALL THICKNESS OF TUBING FOR USE WITH WELD FITTINGS CODED FOR A RANGE OF WALL SIZES |
| SAE MA 2060 : 2015 | FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC |
| SAE AIR1388B | SERVICE DAMAGE LIMITS FOR AIRCRAFT HYDRAULIC TUBING |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| SAE ARP1185B | FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS |
| SAE AS614D | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE AS4459B | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
| SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
| SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
| SAE MA 4510 : 2015 | FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
| SAE AIR5005A | AEROSPACE - COMMERCIAL AIRCRAFT HYDRAULIC SYSTEMS |
| SAE ARP4752B | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE AS18280F | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE AS604E | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| SAE AIR 1529 : 1989 | FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS BY PLANAR RESONANT VIBRATION (FREE-FREE BEAM) |
| SAE MA2005B | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
| SAE AS1576E | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
| SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
| SAE AS1339H | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS4098A | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| SAE ARP4925B | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| SAE ARP 4943 : 2008 | GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR |
| SAE ARP994B | DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE HYDRAULIC SYSTEMS |
| SAE AS85421A | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| SAE AS1946E | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| SAE AMS2248H | CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS2243K | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL TUBING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.