SAE AMS5659S
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
Available format(s)
Hardcopy , PDF
Superseded date
07-10-2021
Superseded by
Language(s)
English
Published date
15-08-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, and extrusions in the solution heat treated condition (see8.3) 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 144 in2(930 cm2), and stock of any size for forging, flash welded rings, or extruding (see8.6).
| DevelopmentNote |
Supersedes SAE AMS 5658 (07/1999)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, and extrusions in the solution heat treated condition (see 8.3) 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 144 in2x (930 cm2x), and stock of any size for forging, flash welded rings, or extruding (see 8.6).
| SAE MA4098 | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 °C, 35 000 kPa Hydraulic and Pneumatic, Metric |
| MS39206 Revision G:2012 | ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| SAE AS4388 | Hose Assembly PTFE Heavy Duty, -65 To 400 °F (-55 To 204 °C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| ISO 8913:2006 | Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification |
| SAE AMSS6090B | Steel Carburizing and Nitriding, Processes for |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING |
| SAE AS4444 | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
| SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| SAE AS4604B | Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| SAE AS18280/2A | Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi |
| NASM 23460 : 2004 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING |
| SAE AS1576E | Fittings, Welded, Hydraulic, Titanium, Corrosion Resistant Steel and Nickel, 3000 psi Hydraulic |
| SAE MA620 | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
| SAE AS4060 | Tube Fitting Swaged Joint, Roller Expander Manual Process, Requirements for |
| SAE AS85720B | Fittings, Tube, Fluid Systems, Separable, High Pressure Beam Seal, 5000/8000 psi, General Specification For |
| SAE AS4098A | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 °F, 5000 psi Hydraulic and Pneumatic |
| SAE MA1975 | Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 °C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems |
| SAE AS4510 | Fittings, Weld, Fluid Connection, 5000 psi |
| SAE AS85421A | Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification For |
| SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
| SAE AMS 5659/H1025 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| MIL-DTL-13220 Revision G:2015 | HOOK, SLIP (FOR USE WITH WIRE ROPE OR CHAINS) |
| SAE MA2060A | Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 21 000 kPa, Metric |
| SAE MA1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 °C, Lightweight, Hydraulic and Pneumatic, Metric |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| SAE MA2005B | Tube Fittings, Aerospace Fluid Systems, Separable, For 24° Cone, General Specification, Metric (ISO 7169) |
| SAE MA4510 | Fittings, Weld, Fluid Connection, 35 000 kPa, Metric |
| SAE AS4897 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| MS27612 Revision M:2013 | ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS5356B | Coupling, Fuel Line, Flexible, 125 psi General Specification for |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE MA4623 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
| SAE AS4897A | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| SAE ARP1110C | Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys |
| SAE AMS 5659/H1025 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS2750E | Pyrometry |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS2374E | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steel and Alloy Forgings |
| SAE AS6279A | Standard Practice for Production, Distribution, and Procurement of Metal Stock |
| SAE AMS2808E | Identification Forgings |
| SAE AMS2315G | Determination of Delta Ferrite Content |
| SAE AMS2300L | Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure |
| SAE AMS7490Q | Rings, Flash Welded Corrosion and Heat-Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.