SAE AMSDTL22499A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Shim Stock, Laminated
Hardcopy , PDF
English
15-03-2013
13-05-2018
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the requirements for surface bonded laminated shim stock.
| DevelopmentNote |
Supersedes MIL DTL 22499 (D) (06/2004)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers the requirements for surface bonded laminated shim stock.
| Standards | Relationship |
| MIL-DTL-22499 Revision D:1998 | Similar to |
| SAE AMS4508H | Similar to |
| SAE AMSQQA250/8C | Aluminum Alloy 5052, Plate and Sheet |
| SAE AMS5906B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS5912B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5903B | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5905B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5910B | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS4940B | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS4902K | Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength |
| MIL-I-24768-13 Base Document:1992 | Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (FBE) |
| SAE AMS5913B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS5513J | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr – 9.2Ni (SAE 30304) Solution Heat Treated |
| SAE AMS5516P | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS5904B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| SAE AMSQQA250/5B | Aluminum Alloy Alclad 2024, Plate and Sheet |
| SAE AMS5911B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-I-24768-15 Base Document:1992 | Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (FBI) |
| SAE AMS4901T | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) |
| SAE AMS4900P | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.