SAE ARP 1917 : 2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS
Superseded date
03-01-2016
Superseded by
Published date
01-01-2002
Publisher
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS 4966 : 2017 | TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
| SAE AMS5697G | Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (304) Solution Heat Treated |
| SAE AMS4250B | Aluminum Alloy, Plate 8.1Zn - 2.3Mg - 1.0Cu - Zr (7449-T7651) Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4916L | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS6276L | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Consumable Electrode Vacuum Remelted |
| SAE AMS3050/3 | Performance Specification Anti-Seize Thread Compound, High Temperature – Nickel Only |
| SAE AMS6450K | Steel, Spring Wire 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn |
| SAE AMS4466A | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Naturally Aged |
| SAE AMS4405A | Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged |
| SAE AMS4332 | Aluminum Alloy, Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged |
| SAE AMS 3415 : 2017 | FLUX, ALUMINUM DIP BRAZING 1030 DEGREES F (554 DEGREES C) OR LOWER LIQUIDUS |
| SAE AMS5866E | Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (302) Spring Temper |
| SAE AMS4992B | Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed |
| SAE AMS5843G | Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, and Aged |
| SAE AMS6327L | Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS4928W | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
| SAE AMS4905F | Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V Beta Annealed |
| SAE AMS5553H | Nickel, Sheet and Strip Low (0.02 max) Carbon Annealed |
| SAE AMS4044N | Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or when specified, “As Fabricated” (7075-F) |
| SAE AMS6409E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered |
| SAE AMS 5336 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS6330J | Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 – 0.38C) |
| SAE AMS4245F | Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (C355.0) |
| SAE AMS1428/2 | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV Non-Glycol Based |
| SAE AMS3050/5 | Performance Specification Anti-Seize Thread Compound, High Temperature - PTFE Only |
| SAE AMS4979J | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated |
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| SAE AMS6527F | Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged |
| SAE AMS6328N | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (8750) |
| SAE AMS6434H | Steel, Sheet, Strip, and Plate 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) |
| SAE AMS5647K | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated |
| SAE AMS6274R | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) |
| SAE AMS4416B | Aluminum Alloy, Extruded Profiles (2196-T8511) 2.9Cu - 1.7Li - 0.4Mg - 0.4Ag - 0.10Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially Aged |
| SAE AMS4276B | Aluminum Alloy, Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed, Fine Grained |
| SAE AMS4544H | Nickel-Copper Alloy, Corrosion Resistant, Sheet, Strip, and Plate 67Ni - 30Cu Annealed |
| SAE AMS 4473 : 2017 | ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS5826E | Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu |
| SAE AMS4462A | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T3 Sheet, -T351 Plate) Solution Heat Treated, Cold Worked and Naturally Aged |
| SAE AMS4015M | Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed |
| SAE AMS4365 | Aluminum Alloy, Plate, 7.9Zn – 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4345B | Aluminum Alloy, Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T77511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged |
| SAE AMS7002 | Process Requirements for Production of Metal Powder Feedstock for Use in Additive Manufacturing of Aerospace Parts |
| SAE AMS5517L | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS3050/9 | Performance Specification Anti-Seize Thread Compound, High Temperature - ‘Graphite+Calcium Fluoride’ Only |
| SAE AMS4921N | Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength |
| SAE AMS1424/1 | Deicing/Anti-Icing Fluid, Aircraft SAE Type I Glycol (Conventional and Non-Conventional) Based |
| SAE AMS 5350 : 2017 | STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
| SAE AMS4374 | Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS6302K | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C) |
| SAE AMS5842G | Cobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened |
| SAE AMS4344D | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS5402C | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast |
| SAE AMS4935L | Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed |
| SAE AMS4049M | Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS4601A | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351) |
| SAE AMS5862M | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation-Hardenable |
| SAE AMS4975N | Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated |
| SAE AMS 5916 : 2017 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 35FE - 24CR - 37NI - 0.65CB(NB) - 0.2N, ANNEALED |
| SAE AMS4350N | Magnesium Alloy, Extrusions 6.5A1 - 0.95Zn (AZ61A-F) As Extruded |
| SAE AMS4357 | Aluminum Alloy, Die Forgings 3.5Cu – 1.0Li - 0.04Mg – 0.35Mn – 0.45Ag – 0.12Zr (2050-T852) Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS 3920 : 2014 | ACCEPTANCE CRITERIA, ADHESIVE-BONDED METAL-FACED SANDWICH STRUCTURES |
| SAE AMS5631F | Steel, Corrosion-Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (440A) |
| SAE AMS6303J | Steel Bars and Forgings, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) |
| SAE AMS6946C | Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed |
| SAE AMS4959G | Titanium Alloy Wire 13.5V - 11Cr - 3Al Spring Temper |
| SAE AMS6528D | Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized |
| SAE AMS3379 | Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels |
| SAE AMS5643V | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS4035M | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed; or when specified, “As Fabricated” (2024-F) |
| SAE AMS 4472 : 2017 | ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS4909K | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn, Extra Low Interstitial Annealed |
| SAE AMS4249A | Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS6280M | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 – 0.33C) (SAE 8630) |
| SAE AMS 2434 : 2017 | PLATING, TIN-ZINC ALLOY |
| SAE AMS4315A | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS6475K | Steel, Nitriding, Bars, Forgings, and Tubing 1.1Cr – 3.5Ni – 0.25Mo – 1.2Al (0.21 – 0.26C) |
| SAE AMS 6953 : 2018 | TITANIUM ALLOY SHEET, 6AL - 4SN - 3NB - 0.5MO - 0.3SI, DUPLEX ANNEALED |
| SAE AMS4477A | Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated |
| SAE AMS 7875 : 2017 | POWDER, CHROMIUM CARBIDE PLUS NICKEL-CHROMIUM ALLOY, 75CR[2]C[3] + 25 (80NI - 20CR ALLOY) |
| SAE AMS4256C | Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated |
| SAE AMS6408E | Steel, Hotwork Tool, Bars and Forgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed |
| SAE AMS4269A | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn; (2024-T361), Solution Heat Treated and Cold Worked |
| SAE AMS4341E | Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
| SAE AMS6352K | Steel Sheet, Strip, and Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135) |
| SAE AMS5442B | Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| SAE AMS5824F | Steel, Corrosion-Resistant, Welding Wire 17Cr - 7.1Ni - 1.0Al |
| SAE AMS6548 | Steel Bars, Forgings, and Tubing 1.0Cr – 3.2Ni – 0.2Mo (0.12 – 0.17C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS4296C | Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked |
| SAE AMS 6952 : 2018 | TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS2404J | Plating, Electroless Nickel |
| SAE AMS4290M | Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast |
| SAE AMS1428/1 | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV Glycol (Conventional and Non-Conventional) Based |
| SAE AMS5085J | Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050) |
| SAE AMS6551 | Steel Bars, Forgings and Tubing 1.75 Cr – 4.0 Ni – 0.5 Mo – (0.35–0.40 C) Premium Aircraft Quality Consumable Electrode Vacuum Remelted |
| SAE AMS5629H | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS2631E | Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate |
| SAE AMS5951A | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable |
| SAE AMS4490K | Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast |
| SAE AMS4291J | Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast |
| SAE AMS2380G | Approval and Control of Premium-Quality Titanium Alloys |
| SAE AMS 6456 : 2017 | STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS4981H | Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated |
| SAE AMS6547 | Steel Bars, Forgings, and Tubing 1.0Cr - 3.2Ni - 0.2Mo (0.12 – 0.17C) Aircraft-Quality |
| SAE AMS4946E | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved |
| SAE AMS 4892 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, AS CAST |
| SAE AMS1424N | Fluid, Aircraft Deicing/Anti-Icing, SAE Type 1 |
| SAE AMS4617A | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged |
| SAE AMS6411J | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Remelted |
| SAE AMS5604J | Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable |
| SAE AMS 5846 : 2016 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS4121J | Aluminum Alloy Bars, Rods, and Wire, Rolled, Drawn, or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6, -T651) Solution and Precipitation Heat Treated |
| SAE AMS5532H | Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb(Nb) - 0.15N Solution Heat Treated |
| SAE AMS4675E | Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu |
| SAE AMS4048P | Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, “As Fabricated” (Alclad 7075-F) |
| SAE AMS5655F | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Tempered |
| SAE AMS4616F | Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved |
| SAE AMS 5841 : 2016 | COBALT-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS 19CR - 36CO - 25NI - 7.0MO - 0.50CB (NB) - 2.9TI - 0.20AL - 9.0FE VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| SAE AMS6511A | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted, Annealed |
| SAE AMS5768L | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated |
| SAE AMS6494B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Aircraft-Quality |
| SAE AMS4464A | Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged |
| SAE AMS6360M | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved |
| SAE AMS4268A | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn; (2024-T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS5618J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Consumable Electrode Vacuum Melted |
| SAE AMS4329B | Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged |
| SAE AMS5716K | Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated |
| SAE AMS4911P | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS2355M | Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings |
| SAE AMS2759E | Heat Treatment of Steel Parts General Requirements |
| SAE AMS6348D | Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized |
| SAE AMS4712G | Copper Alloy, Wire 65Cu - 35Zn Annealed (O61) |
| SAE AMS5504N | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS5702E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated |
| SAE AMS4403A | Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS4955H | Titanium Alloy, Welding Wire 8Al - 1Mo - 1V |
| SAE AMS3050/7 | Performance Specification Anti-Seize Thread Compound, High Temperature – ‘Copper+Graphite+Aluminum’ Only |
| SAE AMS4078J | Aluminum Alloy Sheet and Plate 5.6Zn – 2.5Mg-1.6Cu-0.23Cr 7075: (-T73 Sheet, -T7351 Plate) Solution Heat Treated and Overaged |
| SAE AMS4939C | Titanium Alloy Sheet, Strip, and Plate 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated |
| SAE AMS4458A | Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS6308E | Steel, Bars and Forgings 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc or Electroslag Remelted |
| SAE AMS6304M | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) |
| SAE AMS6320P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.33 – 0.38C) (8735) |
| SAE AMS6484E | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered |
| SAE AMS4978H | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed |
| SAE AMS5930B | Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
| SAE AMS4285F | Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS6455L | Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS4406A | Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated |
| SAE AMS4277B | Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed, Fine Grained |
| SAE AMS6951 | Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe Annealed |
| SAE AMS4339B | Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged |
| SAE AMS1428J | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV |
| SAE AMS4079H | Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed |
| SAE AMS5898B | Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure |
| SAE AMS6323M | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
| SAE AMS4612K | Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04) |
| SAE AMS4193D | Aluminum Alloy Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| SAE AMS5505F | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (410 Modified) Ferrite Controlled, Annealed |
| SAE AMS4625H | Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper |
| SAE AMS4094D | Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
| SAE AMS 5338 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS5046E | Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) |
| SAE AMS2418J | Plating, Copper |
| SAE AMS6509A | Steel Bars and Forgings 3.5Cr – 7.5Ni – 16.3Co – 1.75Mo – 0.2W – (0.09 - 0.13C) Double Vacuum Melted, Normalized, Annealed |
| SAE AMS4251B | Aluminum Alloy Sheet 2.7Cu - 2.2Li - 0.12Zr (2090-T83) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5934B | Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS4976K | Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated |
| SAE AMS6539 | Steel Bars, Forgings, and Tubing 1.7Cr – 3.8Ni – 0.3Mo (0.32 – 0.38 C) Aircraft-Quality |
| SAE AMS4045L | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS5713K | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated |
| SAE AMS6463E | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS4417C | Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated |
| SAE AMS4463A | Aluminum Alloy, Plate (7255-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4917J | Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated |
| SAE AMS6415U | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) |
| SAE AMS4212L | Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS6381J | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) |
| SAE AMS6414M | Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted |
| SAE AMS2466C | Hard Anodic Coating of Magnesium Alloys |
| SAE AMS4225E | Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated |
| SAE AMS4017L | Aluminum Alloy Sheet and Plate 2.5Mg - 0.25Cr (5052-H34) Strain-Hardened, Half-Hard, and Stabilized |
| SAE AMS6305G | Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum Arc Remelted |
| SAE AMS5632J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (440F) Free-Machining, Annealed |
| SAE AMS5635G | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
| SAE AMS2249H | Chemical Check Analysis Limits Titanium and Titanium Alloys |
| SAE AMS4157E | Aluminum Alloy Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4327A | Aluminum Alloy, Plate (2098-O) 3.5Cu - 1.1Li - 0.50Mg - 0.40Ag - 0.11Zr Annealed |
| SAE AIR4779C | User\'s Guide to AMS Specifications |
| SAE AMS4942G | Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength |
| SAE AMS4553D | Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61) |
| SAE AMS6277H | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted |
| SAE AMS 5410 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 61NI - 16CR - 8.5CO - 1.8MO - 2.6W - 0.85CB (NB) - 3.4TI - 1.8TA - 3.4AL - 0.010B - 0.05ZR, VACUUM MELTED, VACUUM CAST AS CAST, OR SOLUTION TREATED, OR SOLUTION AND PRECIPITATION HARDENED |
| SAE AMS5585H | Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N Solution Heat Treated |
| SAE AMS4993F | Titanium Alloy, Blended Powder Compacts, Sintered 6Al - 4V |
| SAE AMS5558H | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Thin Wall Solution Heat Treated |
| SAE AMS6267J | Steel Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS7000 | Laser-Powder Bed Fusion (L-PBF) Produced Parts, Nickel Alloy, Corrosion and Heat-Resistant, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb Stress Relieved, Hot Isostatic Pressed and Solution Annealed |
| SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS4284K | Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS2420E | Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process |
| SAE AMS6532F | Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitaiton Hardenable |
| SAE AMS6255F | Steel Bars, Forgings, and Tubing 1.1Si - 1.45Cr - 1.0Mo - 0.08Al (0.16 - 0.22C) Double Vacuum Melted |
| NASA HDBK 6025 : 2014 | GUIDELINES FOR THE SPECIFICATION AND CERTIFICATION OF TITANIUM ALLOYS FOR NASA FLIGHT APPLICATIONS |
| SAE AMS4973H | Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS6439E | Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS6558 | Steel, Bars, Wire, and Forgings 10.5 Mo - 6 W - 3.75 Cr - 2 V (1.25 - 1.40 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS3050/6 | Performance Specification Anti-Seize Thread Compound, High Temperature - ‘Nickel+Graphite’ Only |
| SAE AMS4599A | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851) |
| SAE AMS4163F | Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened |
| SAE AMS6950 | Titanium Alloy Bars, Forgings, and Forging Stock 4Al - 2.5V - 1.5 Fe Single Hearth Melted, Annealed |
| SAE AMS4940C | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength |
| SAE AMS4342F | Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
| SAE AMS5596M | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated |
| SAE AMS4211B | Aluminum Alloy, Plate 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451) Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS5597G | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated |
| SAE AMS6260S | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (9310) |
| SAE AMS4194E | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024 -T361 Sheet/Plate with 1½% Alclad) Solution Heat Treated, 6% Cold Worked and Naturally Aged |
| SAE AMS6512H | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS4633B | Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50) |
| SAE AMS6430J | Steel, Bars, Forgings, Tubing, and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 – 0.38C) (4335 Modified) |
| SAE AMS6372N | Steel, Mechanical Tubing 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135) |
| SAE AMS4206C | Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4343D | Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged |
| SAE AMS4951J | Titanium Welding Wire Commercially Pure Environment Controlled Packaging |
| SAE AMS4730H | Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400) |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu |
| SAE AMS4954K | Titanium Alloy, Welding Wire 6Al - 4V |
| SAE AMS1424/2 | Deicing/Anti-Icing Fluid, Aircraft SAE Type I Non-Glycol Based |
| SAE AMS5689G | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS4299A | Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS5664F | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated, Precipitation Hardenable |
| SAE AMS4461 | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, “As Fabricated” (2024-F) |
| SAE AMS4956G | Titanium Alloy Welding Wire 6Al – 4V, Extra Low Interstitial Environment Controlled Packaging |
| SAE AMS6317K | Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 – 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS2545 | Controlled Pneumatic Needle Peening, Straightening and Forming |
| SAE AMS2771F | Heat Treatment of Aluminum Alloy Castings |
| SAE AMS4348E | Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited For Sandwich Construction 5052, 350 (177) |
| SAE AMS4478A | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged |
| SAE AMS4558H | Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) |
| SAE AMS4915M | Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed |
| SAE AMS4897D | Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si |
| SAE AMS3050/8 | Performance Specification Anti-Seize Thread Compound, High Temperature - ‘Graphite+Aluminum’ Only |
| SAE AMS4779K | Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus |
| SAE AMS5608G | Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated |
| SAE AMS 4893 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, SOLUTION TREATED |
| SAE AMS 5694 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI |
| SAE AMS2449 | Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels |
| SAE AMS4189J | Aluminum Alloy Welding Wire 4.1 Si -0.20 Mg (4643) |
| SAE AMS3050/1 | Performance Specification Anti-Seize Thread Compound, High Temperature - Copper Only |
| SAE AMS5687N | Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed |
| SAE AMS5703E | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated |
| SAE AMS 6354 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C) |
| SAE AMS4933F | Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized |
| SAE AMS6525E | Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted |
| SAE AMS7001 | Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 62Ni - 21.5Cr - 9.0Mo - 3.65Nb |
| SAE AMS6516B | Steel, Bars and Forgings 1Cr – 10Ni – 7Co – 2Mo – 1.3W – 0.1V – (0.28 – 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed Precipitation Hardenable |
| SAE AMS4221E | Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
| SAE AMS4149E | Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated |
| SAE AMS4375M | Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS5825H | Steel, Corrosion-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu |
| SAE AMS5540P | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed |
| SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
| SAE AMS4120S | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351) |
| SAE AMS 5917 : 2011 | METAL INJECTION MOLDED NICKEL BASED, ALLOY 718 PARTS, HOT ISOSTATICALLY PRESSED, SOLUTIONED AND AGED |
| SAE AMS4313E | Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved |
| SAE AMS 4041 : 2012-07 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS4475B | Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated |
| SAE AMS6529D | Steel, Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized |
| SAE AMS6448L | Steel, Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 – 0.53C) (SAE 6150) |
| SAE AMS5357D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS3025E | Polyalkylene Glycol Heat Treat Quenchant |
| SAE AMS4467B | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu 1.5Mg 0.60Mn (Alclad 2024, -T861 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Artificially Aged |
| SAE AMS 2409 : 2016 | PLATING, IMMERSION TIN FOR ALUMINUM ALLOYS |
| SAE AMS6346B | Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength |
| SAE AMS6424G | Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 – 0.55C) |
| SAE AMS5876E | Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Remelted Solution Heat Treated and Cold Rolled |
| SAE AMS2428 | Plating, Cobalt-Phosphorus, Nanocrystalline |
| SAE AMS4941G | Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength |
| SAE AMS4434N | Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated |
| SAE AMS6290J | Steel, Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615) |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS4910R | Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed |
| SAE AMS5339G | Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated |
| SAE AMS5955B | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS6435G | Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Vacuum Consumable Electrode Melted, Annealed |
| SAE AMS5506G | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (420) Annealed |
| SAE AMS6560 | Steel Bars, Wire and Forgings 10 Co - 7 Mo - 6 V - 6 W - 4 Cr (2.2 – 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed Consolidated |
| SAE AMS4402A | Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Solution Heat Treated and Stress Relieved by Stretching |
| SAE AMS4359 | Aluminum Alloy, Extruded Profiles (2395-T84) 3.95Cu - 1.15Li - 0.3Ag - 0.5Mg - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching, and Aged |
| SAE AMS6481D | Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1Mo - 0.2V - (0.29 - 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted |
| SAE AMS 5333 : 2017 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.25MO (0.11 - 0.17C) (SAE 8615), NORMALIZED |
| SAE AMS2259F | Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels |
| SAE AMS4095D | Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved |
| SAE AMS4040P | Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 ½% Alclad); Annealed |
| SAE AMS7735E | Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat Treated |
| SAE AMS4338A | Aluminum Alloy, Extrusions 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching |
| SAE AMS5441B | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS6526H | Steel, Bars, Forgings, Tubing, and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed |
| SAE AMS 4372 : 2018 | ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS4970K | Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat Treated |
| SAE AMS 4574F : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, TUBING, SEAMLESS 67NI - 31CU ANNEALED |
| SAE AMS4368 | Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3μm) (T1P) |
| SAE AS6279A | Standard Practice for Production, Distribution, and Procurement of Metal Stock |
| SAE AMS4352J | Magnesium Alloy, Extrusions 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated |
| SAE AMS2647F | Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| SAE AMS4967L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable |
| SAE AMS5811D | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0.01 - 0.03C) Vacuum Induction Melted, Environment Controlled Packaging |
| SAE AMS4071N | Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg – 0.25Cr (5052-O) Annealed |
| SAE AMS7498R | Rings, Flash Welded Titanium and Titanium Alloys |
| SAE AMS4971L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable |
| SAE AMS5648M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AMS4255B | Aluminum Allloy, Clad One Side Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet) As Fabricated |
| SAE AMS4949B | Titanium, Sheet, Laminated, Surface Bonded |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| SAE AMS5537J | Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated |
| SAE AMS4002A | Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T6511) |
| SAE AMS4613A | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87) |
| SAE AMS4963D | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength |
| SAE AMS3050/4 | Performance Specification Anti-Seize Thread Compound, High Temperature – Molybdenum Disulphide; Graphite Only |
| SAE AMS5337E : 2017 | STEEL, MARAGING, INVESTMENT CASTINGS, 18.5NI - 9.0CO - 5.0MO - 0.70TI - 0.12AL, VACUUM MELTED, HOMOGENIZED, OVERAGED, AND SOLUTION HEAT TREATED |
| SAE AMS4031J | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-O) Annealed or when specified, “As Fabricated” (2219-F) |
| SAE AMS4085D | Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged |
| SAE AMS5599H | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Annealed |
| SAE AMS6495B | Steel Bars, Forgings, and Tubing 1.0Cr – 2.50Ni – 2.0Mo – 1.10Si (0.10 – 0.20C) Premium Aircraft-Quality Electroslag Remelted or Consumable Electrode Vacuum Remelted |
| SAE AMS5712K | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable |
| SAE AMS4407A | Aluminum Alloy, Plate (7056-T7651) 9.1Zn - 1.6Cu - 1.9Mg Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS6407K | Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 – 0.33C) |
| SAE AMS4991E | Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional |
| SAE AMS5773E | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable |
| SAE AMS6265P | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (9310) Vacuum Consumable Electrode Remelted |
| SAE AMS6349E | Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized |
| SAE AMS1435C | Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways |
| SAE AMS6431P | Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode Remelted |
| SAE AMS6514J | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS6487L | Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS6544D | Maraging Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated |
| SAE AMS2370L | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock |
| SAE AMS5906C | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS4408A | Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged |
| SAE AMS4326A | Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0Mg - 0.80Si - 1.8Cu - 0.20Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged |
| SAE AMS4217J | Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS6557 | Steel, Bars, Wire, and Forgings 9V - 5.25Cr - 1.3Mo (1.80 – 1.95C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5132L | Steel, Bars 0.90 - 1.03C |
| SAE AMS4244C | Aluminum Alloy, Welding Wire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti For Welding A206.0 Type Alloys |
| SAE AMS2368D | Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock |
| SAE AMS4485A | Magnesium Alloy, Extrusions 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated |
| SAE AMS3050/2 | Performance Specification Anti-Seize Thread Compound, High Temperature – Aluminum Only |
| SAE AMS6523H | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
| SAE AMS6454E | Steel, Sheet, Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted |
| SAE AMS4174E | Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated |
| SAE AMS4123H | Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| SAE AMS4107G | Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged |
| SAE AMS5554G | Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed |
| SAE AMS6257F | Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered |
| S.R. CWA 16762:2014 | CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR |
| SAE AMS6559 | Steel, Bars, Wire, and Forgings 9.75 V - 5.25 Cr - 1.3 Mo (2.40 – 2.55 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS6371L | Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS4945F | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved |
| SAE AMS6556 | Steel, Bars, Wire, and Forgings 8V - 4Cr - 4W - 3Mo (2.45 – 2.55C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5700G | Steel, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS5666H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed |
| SAE AMS4443H | Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated |
| SAE AMS4340E | Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
| SAE AMS6931D | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed |
| SAE AMS7707E | Iron, Commercially Pure, Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.