SAE ARP 4926 : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ALLOY VERIFICATION AND CHEMICAL COMPOSITION INSPECTION OF WELDING WIRE
Superseded date
21-08-2021
Superseded by
Published date
01-01-2011
Publisher
Sorry this product is not available in your region.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 REJECTION
6 NOTES
Specifies procedures for welding wire verification and conformance to specification composition.
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS4955H | Titanium Alloy, Welding Wire 8Al - 1Mo - 1V |
| SAE AMS4191J | Aluminum Alloy, Welding Wire 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319) |
| SAE AMS5839C | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al |
| SAE AMS4233C | Aluminum Alloy, Welding Wire 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) |
| SAE AMS4245F | Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (C355.0) |
| SAE AMS5034B | Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6469E | Steel, Welding Wire 1.75Mn - 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS4399 | Magnesium Alloy Welding Wire 5.1Y - 3.0Re - 0.7Zr (WE54A) |
| SAE AMS5035C | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) |
| SAE AMS5808D | Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled |
| SAE AMS5831E | Iron-Nickel-Chromium-Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N |
| SAE AMS5782G | Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted |
| SAE AMS5824F | Steel, Corrosion-Resistant, Welding Wire 17Cr - 7.1Ni - 1.0Al |
| SAE AMS5966B | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted |
| SAE AMS6459E | Steel, Welding Wire 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted |
| SAE AMS5821G | Steel, Corrosion-Resistant, Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade |
| SAE AMS6461L | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5796E | Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni - 15W |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6456 : 2017 | STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS6468E | Steel, Welding Wire 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 – 0.17C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS4398 | Magnesium Alloy Welding Wire 8.7Al - 0.70Zn - 0.26Mn (AZ91E) |
| SAE AMS5802E | Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti Vacuum Melted, Low Expansion |
| SAE AMS4396F | Magnesium Alloy Welding Wire 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A) |
| SAE AMS 5828 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE MAM5822B | Steel, Corrosion and Heat Resistant, Welding Wire 11.8cr 2.8ni 1.6co 1.8mo 0.32v Vacuum Induction Melted |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS5675H | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe |
| SAE AMS6465E | Wire, Steel Welding 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) (HY-180) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5030K | Steel, Welding Wire 0.06 Carbon, Maximum |
| SAE AMS4395F | Magnesium Alloy Welding Wire 9.0Al - 2.0Zn (AZ92A) |
| SAE AMS6375D | Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS6453D | Steel, Welding Wire 0.30Cr - 1.8Ni - 0.40Mo - (0.23-0.28C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5823E | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5800F | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted |
| SAE AMS5803G | Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted |
| SAE AMS6466G | Steel, Corrosion-Resistant, Welding Wire 5.2Cr – 0.55Mo |
| SAE AMS 5696 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS6452E | Steel, Welding Wire 0.95Cr - 0.20Mo (0.38 - 0.43C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5786H | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe |
| SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5682 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 78NI - 20CR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS 5837G : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB) |
| SAE AMS 5835 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.2MN - 20CR - 2.5CB - 0.48TI, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS4391 | Magnesium Alloy Welding Wire 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A) |
| SAE AMS5027F | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 – 0.32C) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS5028E | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS4181C | Aluminum Alloy, Welding Wire 7.0Si - 0.38Mg - 0.10Ti (4008 or 356) |
| SAE AMS4246E | Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357) |
| SAE AMS6460G | Wire, Steel Welding 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) |
| SAE AMS4951J | Titanium Welding Wire Commercially Pure Environment Controlled Packaging |
| SAE AMS4954K | Titanium Alloy, Welding Wire 6Al - 4V |
| SAE AMS5832H | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted |
| SAE AMS4956G | Titanium Alloy Welding Wire 6Al – 4V, Extra Low Interstitial Environment Controlled Packaging |
| SAE AMS5831D | Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N |
| SAE AMS5964 | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted |
| SAE AMS5784E | Steel, Corrosion and Heat-Resistant, Welding Wire 29Cr - 9.5Ni |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5694 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS4189J | Aluminum Alloy Welding Wire 4.1 Si -0.20 Mg (4643) |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS5836D | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb) |
| SAE AMS5825H | Steel, Corrosion-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu |
| SAE AMS5789D | Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W |
| SAE AMS5029D | Steel, Welding Wire 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5776G | Steel, Corrosion and Heat-Resistant, Welding Wire 12.5Cr (SAE 51410) |
| SAE AMS4952F | Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo |
| SAE AMS 5829 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 56NI - 19.5CR - 16.5CO - 2.5TI - 1.5AL, VACUUM INDUCTION MELTED |
| SAE AMS 5814 : 2011 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 20NI - 7.5TA, VACUUM MELTED |
| SAE AMS5778J | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni – 15.5Cr – 1.0Cb(Nb) – 2.4Ti – 0.70Al – 7.0Fe |
| SAE AMS5679H | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe |
| SAE AMS4394 | Magnesium Alloy Welding Wire 2.5Ag - 2.1Di - 0.70Zr (QE22A) |
| SAE AMS4400 | Magnesium Alloy Welding Wire 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A) |
| SAE AMS4190K | Aluminum Alloy, Welding Wire 5.2Si (4043) |
| SAE AMS6462K | Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS5805H | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging |
| SAE AMS5794E | Iron Alloy, Corrosion and Heat-Resistant, Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Annealed |
| SAE AMS4953G | Titanium Alloy Welding Wire 5Al - 2.5Sn |
| SAE AMS4393 | Magnesium Alloy Welding Wire 4.0Y - 2.3Nd - 0.7Zr (WE43B) |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS5798H | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18Fe |
| SAE AMS5811D | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0.01 - 0.03C) Vacuum Induction Melted, Environment Controlled Packaging |
| SAE AMS4392 | Magnesium Alloy Welding Wire 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A) |
| SAE AMS5790D | Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade |
| SAE AMS5788F | Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C |
| SAE AMS6463E | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5826E | Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu |
| SAE AMS4244C | Aluminum Alloy, Welding Wire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti For Welding A206.0 Type Alloys |
| SAE AMS 5676 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR |
| SAE AMS6458J | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5029E | Steel, Welding Wire 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)(4335 Mod) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5028F | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) Vacuum Melted, Environment-Controlled Packaging |
| SAE AMS5796F | Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W |
| SAE AMS6463G | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| ASTM E 350 : 2012-09 | TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
| ASTM E 1409 : 2013 : REDLINE | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.