SAE ARP5555
Current
The latest, up-to-date edition.
Recommendations for Installation of Seals in Standard Glands
Hardcopy , PDF
English
16-02-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. GENERAL DESIGN REQUIREMENTS FOR
HYDRAULIC UNITS
4. STANDARD O-RING AND D-RING SEALS
5. NON-STANDARD HYDRAULIC SEALS
6. ANTI-EXTRUSION DEVICES
7. STATIC SEALS
8. DYNAMIC SEALS
9. DESIGN DATA ON THE USE OF DYNAMIC
AND STATIC SEALS
10. NOTES
This SAE Aerospace Recommended Practice (ARP) contains guidance regarding hardware design and installation procedures for seals in hydraulic components that utilize standard seal glands in accordance with AS4716, AS4832, AS4088, AS4052, AS5857, and AS6235.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
SAE International
|
| Status |
Current
|
This SAE Aerospace Recommended Practice (ARP) contains guidance regarding hardware design and installation procedures for seals in hydraulic components that utilize standard seal glands in accordance with AS4716, AS4832, AS4088, AS4052, AS5857, and AS6235.
| SAE AS4716C | Gland Design, O-ring and Other Seals |
| SAE AS4716B | Gland Design, O-ring and Other Elastomeric Seals |
| SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS5860B | Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Static Gland |
| SAE AS5781A | Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS4716 Glands |
| SAE AS33515D | FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS |
| SAE AMSP5510A | O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) |
| SAE AS1300D | PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR |
| SAE AS28775A | PACKING, PREFORMED - MS28775 O-RING |
| SAE AS4395B | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE ARP4752B | Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems |
| SAE AS5782A | Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, For Use in AS4716 Glands |
| SAE AS1986F | FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/ |
| SAE AS4099D | ADAPTER, ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARELESS TUBE END |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS5440A | Hydraulic Systems, Military Aircraft, Design and Installation, Requirements For |
| SAE AS568D | Aerospace Size Standard for O-rings |
| SAE AS 5857 : 2010 | GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |
| SAE AS6235A | Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications |
| MS28782 Revision E:2006 | RETAINER, PACKING, BACK-UP, TEFLON |
| SAE AS83461/2B | STRAIGHT THREAD TUBE FITTING BOSS O-RING MOLDED FROM AMS-P-83461 RUBBER |
| MS28773 Revision A:2005 | RETAINER, PACKING, BACK-UP, TETRAFLUOROETHYLENE, STRAIGHT THREAD TUBE FITTING BOSS |
| SAE AS8791C | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| SAE AS83461/1B | M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
| SAE AS28778B | O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER |
| MS28783 Revision F:2006 | RING, GASKET, BACK-UP, PTFE |
| SAE AS4088C | Aerospace Rod Scraper Gland Design Standard |
| SAE AS33514C | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
| NAS1612:2005 | PACKING, ETHYLENE PROPYLENE PREFORMED, O-RING PHOSPHATE ESTER RESISTANT, STRAIGHT THREAD TUBE FITTING BOSS (-65 DEGREES F TO 250/300 DEGREES F) |
| SAE AS28772B | “D” RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL |
| SAE ARP4925B | Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems |
| SAE AS 4052 : 2015 | GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION |
| SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| MS21344 Revision A:2016 | FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR |
| NAS 1611:2005 | PACKING, ETHYLENE PROPYLENE, PREFORMED O-RING, PHOSPHATE ESTER RESISTANT (-65 DEGREES F TO 250/300 DEGREES F) |
| SAE AS5861A | Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.