SAE AS 1241 : 2016
Current
Current
The latest, up-to-date edition.
FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
16-09-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALIFICATION
5. QUALITY CONTROL
6. PACKAGING AND MARKING
7. NOTES
Describes the requirements for physical and chemical properties and the minimum tests to evaluate suitability of phosphate ester hydraulic fluids for use in aircraft systems where fire resistance is required.
| Committee |
A-6C1
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| 15/30332965 DC : 0 | BS EN 6059-303 - AEROSPACE SERIES - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| SAE AS 598 : 2012 | AEROSPACE MICROSCOPIC SIZING AND COUNTING OF PARTICULATE CONTAMINATION FOR FLUID POWER SYSTEMS |
| 01/704905 DC : DRAFT MAR 2001 | PREN 3155-041 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 041 - CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 4493 : 2013 | AEROSPACE - DIRECT DRIVE SERVOVALVES |
| SAE AIR 1657 : 2003 | HANDBOOK OF HYDRAULIC METRIC CALCULATIONS |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| MIL-PRF-8805-48 Revision H:2004 | SWITCHES, SENSITIVE, LIMIT, ROLLER LEVER, SELF-RETURN, RESILIANT SEAL, FLUID RESISTANT |
| SAE ARP 598 : 2016 | AEROSPACE MICROSCOPIC SIZING AND COUNTING OF PARTICULATE CONTAMINATION FOR FLUID POWER SYSTEMS |
| SAE AMS 3374 : 2013 | SEALING COMPOUND AIRCRAFT FIREWALL, SILICONE |
| 10/30217640 DC : 0 | BS EN 4701-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531 CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| 00/708806 DC : DRAFT MAY 2000 | PREN 3155-059 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 059: CONTACTS, ELECTRICAL, COAXIAL, SHIELDED, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS R. PRODUCT STANDARD |
| 09/30210064 DC : DRAFT SEP 2009 | BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3155-067:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard |
| MIL-DTL-25038 Revision J:2012 | WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
| SAE AS 595 : 2015 | AEROSPACE - CIVIL TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED, HYDRAULIC PUMP |
| PREN 3155-025 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE D, CRIMP, CLASS S - PRODUCT STANDARD |
| PREN 3155-067 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| PREN 3155-060 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 060: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| PREN 3708-001 : 200P2 | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
| PREN 3155-058 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 058: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| PREN 3545-001 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| SAE AS 6116 : 2016 | ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
| SAE AS 85485 : 2017 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| I.S. EN 3155-069:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
| SAE AMS 3352 : 2016 | SILICONE RUBBER, FIBERGLASS FABRIC REINFORCED |
| SAE AIR 5693 : 2014 | COMPATIBILITY OF PTFE HOSE ASSEMBLIES WITH TYPICAL FLUIDS FOUND IN AEROSPACE APPLICATIONS |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| BS EN 3155-039:2007 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard |
| BS EN 3372-001:2007 | Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous Technical specification |
| BS EN 3545-001:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification |
| BS EN 3155-013:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, solder, class R. Product standard |
| BS EN 3155-061:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, shielded, size 12, female, type D, solder, class R. Product standard |
| SAE AS6976:2022 | Sleeving, Identification, Heat Shrinkable, General Specification |
| MIL-PRF-8805-49 Revision J:2012 | Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
| SAE ARP 1311 : 2015 | LANDING GEAR STRUCTURES AND MECHANISMS |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
| 00/708805 DC : DRAFT MAY 2000 | PREN 3155-058 - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 058: CONTACTS, ELECTRICAL, COAXIAL, SHIELDED, SIZE 16, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 5369 : 2016 | GUIDELINES FOR WIRE IDENTIFICATION MARKING USING THE HOT STAMP PROCESS |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| MIL-DTL-8777 Revision F:2011 | WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
| 14/30298728 DC : 0 | BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| SAE AS 5951 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| MIL-DTL-3702 Revision F:2012 | CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
| 01/702542 DC : DRAFT JAN 2001 | PREN 3155-067 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE AS 1356 : 2012 | LIFE RAFTS |
| SAE AIR 1362 : 2016 | AEROSPACE HYDRAULIC FLUIDS PHYSICAL PROPERTIES |
| SAE AS 5466 : 2012 | AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - QUANTITY MEASURING |
| PREN 3155-068 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE AIR 81 : 2016 | IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| SAE MA 4510 : 2015 | FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| MIL-PRF-8805-39 Revision J:2014 | SWITCHES, SENSITIVE, LIMIT, PLUNGER, 7 AMPERES, RESILIENT SEAL, FLUID RESISTANT |
| I.S. EN 3545-001:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| MIL-PRF-8805-43 Revision K:2014 | SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
| 12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| SAE AMS 7254 : 2014 | PERFLUOROETHER ELASTOMER |
| SAE AIR 5005 : 2015 | AEROSPACE - COMMERCIAL AIRCRAFT HYDRAULIC SYSTEMS |
| 01/702543 DC : 0 | PREN 3155-068 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| 01/704903 DC : DRAFT MAR 2001 | PREN 3155-039 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 039: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| MIL S 8805/43 : G | SWITCH, SENSITIVE, PLUNGER, 7 AMPERES RESILIENT SEAL, FLUID RESISTANT |
| MIL S 8805/48 : F | SWITCH, SENSITIVE, ROLLER LEVER, SELF RETURN, RESILIENT SEAL, FLUID RESISTANT |
| 01/702544 DC : 0 | PREN 3155-069 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
| SAE ARP 5311 : 2016 | AEROSPACE-INTERFACE DEFINITION FOR MECHANICAL ACTUATION SUBSYSTEMS |
| SAE AS 4459 : 2013 | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
| BS EN 3155-069:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard |
| MIL-S-8805-85 Revision E:2005 | SWITCH, SENSITIVE, ROTARY (NON-SELF RETURN), 4 AMPERES, RESILIENT SEAL |
| SAE MA 5405 : 2018 | SPLICES, FIBER OPTICS, FOR AEROSPACE INTER-CONNECTION SYSTEMS |
| SAE AIR 5565 : 2017 | HISTORICAL DESIGN INFORMATION OF AIRCRAFT LANDING GEAR AND CONTROL ACTUATION SYSTEMS |
| SAE AS 4941 : 2015 | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| SAE AS 6449 : 2017 | SOLID FILM LUBRICANT |
| SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
| SAE AS 5000 : 2010 | FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR |
| SAE AMS 7255 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 70 TO 80 |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AIR 1922 : 2017 | AEROSPACE - SYSTEM INTEGRATION FACTORS THAT AFFECT HYDRAULIC PUMP LIFE |
| SAE ARP 5542 : 2012 | HAND HELD AIRCRAFT TIRE INFLATION PRESSURE GAUGES |
| SAE ARP 5891 : 2014 | ACHIEVING CLEANLINESS STANDARDS FOR AIRCRAFT HYDRAULIC SYSTEMS DURING MANUFACTURE |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE AMS 7256 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 85 TO 95 |
| SAE AS 6235 : 2015 | FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
| MIL-PRF-6164 Revision G:2012 | VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING |
| MIL-PRF-8805-40 Revision K:2014 | SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| 01/704904 DC : DRAFT MAR 2001 | PREN 3155-040 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 040 - CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 6154 : 2017 | AEROSPACE FLUID POWER ELECTROHYDROSTATIC MODULE, DESIGN, PERFORMANCE AND TEST RECOMMENDATIONS |
| SAE AIR 1083 : 2012 | AIRBORNE HYDRAULIC AND CONTROL SYSTEM SURVIVABILITY FOR MILITARY AIRCRAFT |
| 13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 14/30298727 DC : 0 | BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| SAE AIR 5699 : 2013 | A GUIDE FOR THE DAMAGING EFFECTS OF TIRE AND WHEEL FAILURES |
| MIL-PRF-8805-80 Revision G:2009 | SWITCH, SENSITIVE, LIMIT, HERMETIC SEAL |
| SAE AMS 3381 : 2014 | SEALING COMPOUND, AIRCRAFT FIREWALL, NON-SILICONE |
| 13/30278621 DC : 0 | BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3155-068:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| SAE AMS 3306 : 2014 | RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 55 - 65 |
| SAE ARP 1280 : 2014 | AEROSPACE - APPLICATION GUIDE FOR HYDRAULIC POWER TRANSFER UNITS |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| PREN 3155-059 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 059: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE AIR 5696 : 2013 | AEROSPACE FLUID POWER - FAA REGULATORY HISTORY - TRANSPORT AIRPLANE HYDRAULIC SYSTEMS |
| SAE AMS 3603 : 2002 | PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
| I.S. EN 3155-068:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| BS EN 6059-303:2017 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Resistance to fluids |
| SAE ARP 4763 : 2017 | AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC RELIEF VALVES |
| 13/30292601 DC : 0 | BS EN 3646-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3155-041:2007 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard |
| BS EN 3155-025:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
| BS EN 3155-059:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard |
| BS EN 2350:1991 | Circuit breakers. Technical specification |
| BS EN 3708-001:2006 | Aerospace series. Modular interconnection systems. Terminal junction systems Technical specification |
| BS EN 3155-040:2007 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard |
| BS EN 3155-012:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, solder, class R. Product standard |
| BS EN 3155-024:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard |
| BS EN 3155-060:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, shielded, size 12, male, type D, solder, class R. Product standard |
| EN 3708-001:2006 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification |
| EN 3155-040:2007 | Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard |
| EN 3155-068:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard |
| EN 3155-025:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard |
| EN 3155-067:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard |
| EN 3372-001:2007 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification |
| EN 3218-001:2006 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification |
| EN 6059-303:2017 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids |
| EN 3155-041:2007 | Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard |
| EN 3155-013:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 013: Contacts, electrical, triaxial, size 8, female, type D, solder, class R - Product standard |
| EN 3155-012:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 012: Contacts, electrical, triaxial, size 8, male, type D, solder, class R - Product standard |
| EN 3155-059:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R Product standard |
| EN 2350:1990 | Aerospace series - Circuit breakers - Technical specification |
| EN 3155-060:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R Product standard |
| EN 3545-001:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification |
| EN 3155-061:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R Product standard |
| EN 3155-069:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard |
| EN 3155-039:2007 | Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
| EN 3155-024:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard |
| SAE AIR 5829 : 2008 | AIR IN AIRCRAFT HYDRAULIC SYSTEMS |
| I.S. EN 6059-303:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| SAE AS 506 : 2004 | HIGH TEMPERATURE INSULATED TERMINALS & SPLICES |
| SAE AS 5467 : 2016 | GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - FLOW RATE |
| SAE ARP 4925 : 2014 | AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS |
| SAE AMS 7257 : 2014 | PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS |
| SAE ARP 4943 : 2008 | GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR |
| SAE ARP 1595 : 2013(R2019) | DESIGN AND VERIFICATION OF AIRCRAFT NOSE WHEEL STEERING SYSTEMS |
| PREN 3155-012 : 200P2 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 012: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| PREN 3155-013 : 200P2 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 013: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| SAE ARP 4752 : 2013 | AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS |
| PREN 3155-061 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 061: CONTACTS, ELECTRICAL, COAXIAL, SIZE 12, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| PREN 3155-069 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| SAE AMS PRF 46194 : 2016 | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| SAE AIR 4543 : 2017 | AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
| SAE ARP4912C:2017 | DESIGN RECOMMENDATIONS FOR SPARE SEALS IN LANDING GEAR SHOCK STRUTS |
| SAE AMS 7265 : 2001 | RINGS, SEALING, ETHYLENE PROPYLENE RUBBER, PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT, 75-85 |
| SAE AS 5551 : 2017 | FITTING ASSEMBLY - 24 DEGREES CONE FLARELESS PER AS5827, 5080 PSI, PORT CONNECTION, PORT PREPARATION, INSTALLATION AND REMOVAL OF AS5550 AND AS5865 |
| SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| SAE AMS 3382 : 2017 | ELASTOMER: TETRAFLUOROETHYLENE/PROPYLENE (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 75 TO 90 HARDNESS |
| SAE MA 4623 : 2015 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| I.S. EN 3155-067:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| BS EN 3218-001:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Technical specification |
| SAE AMS3374G:2023 | Sealing Compound Aircraft Firewall, Silicone |
| SAE ARP1311D:2018(R2023) | Landing Gear Structures and Mechanisms |
| SAE AMS QQ A 250/12 : 2013 | ALUMINUM ALLOY 7075, PLATE AND SHEET |
| IP 71 : 1995 | SECTION 1: PETROLEUM PRODUCTS - TRANSPARENT AND OPAQUE LIQUIDS - DETERMINATION OF KINEMATIC VISCOSITY AND CALCULATION OF DYNAMIC VISCOSITY - SECTION 2: GLASS CAPILLARY KINEMATIC VISCOMETERS - SPECIFICATIONS AND OPERATING INSTRUCTIONS (TWO PART SET) |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| SAE AMS 6280 : 2012 | STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
| SAE AMS 4911 : 2014 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
| ASTM D 2155 : 2012 | Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature |
| ASTM D 1217 : 2015 : REDLINE | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer |
| SAE AMS 4376 : 2011(R2018) | PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-H26) COLD ROLLED AND PARTIALLY ANNEALED |
| SAE AMS T 9046 : 2002 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AMS QQ A 250/4 : 2015 | ALUMINUM ALLOY 2024, PLATE AND SHEET |
| NAS 1613 : 2002 | PACKING, PREFORMED, ETHYLENE PROPYLENE RUBBER |
| SAE AMS 4035 : 2011 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS 4045 : 2016 | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5044 : 2013 | STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM, HALF HARD TEMPER |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| SAE AIR 1362 : 2016 | AEROSPACE HYDRAULIC FLUIDS PHYSICAL PROPERTIES |
| SAE AMS T 81533 : 2001 | TRICHLOROETHANE 1, 1, 1, (METHYL CHLOROFORM) INHIBITED, VAPOR DEGREASING |
| SAE AMS 4377 : 2011 | MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED |
| ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| SAE AMS 4375 : 2011 | SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED |
| IP 15 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| SAE AMS 6350 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
| SAE AMS 4500 : 2007 | COPPER, SHEET, STRIP, AND PLATE, SOFT ANNEALED |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.