SAE AS 1701 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LUBRICANT, SOLID FILM
Available format(s)
Hardcopy , PDF
Superseded date
02-05-2022
Superseded by
Language(s)
English
Published date
10-01-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
This document covers the performance requirements for solid dry film lubricants, air dried or heat cured, for use in aerospace applications.
| Committee |
E-25
|
| DocumentType |
Revision
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MS27082 Revision E:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES |
| MS27057 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27072 Revision F:2013 | WIRE, RETAINER |
| MS27385 Revision C:2013 | Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27382 Revision C:2013 | Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut |
| MS27381 Revision C:2013 | Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut |
| MS27086 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut |
| MS27060 Revision E:2013 | Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut |
| MS27087 Revision D:2013 | Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut |
| MS27383 Revision C:2014 | ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE - WITH SWIVEL NUT |
| MS27056 Revision E:2013 | Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose |
| MS27076 Revision E:2013 | Nipple, Straight, Swivel Flange |
| MS27387 Revision D:2013 | Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut |
| SAE AS 4723 : 2012 | INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MS27055 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut |
| MS27061 Revision D:2013 | Nipple Subassembly, Flared, Straight - with Swivel Nut |
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| SAE AS 5878 : 2013 | NUT, SELF-LOCKING, NICKEL ALLOY, UNS N07001, 1400 DEGREES F, 180,000 PSI, UNJ THREAD PROCUREMENT SPECIFICATION |
| MS27389 Revision D:2014 | ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES FORGED, SWIVEL NUT |
| MS27067 Revision D:2013 | Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut |
| MS27064 Revision E:2014 | ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45 DEGREES |
| MS27075 Revision D:2013 | NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT |
| MS27071 Revision D:2013 | UNION, NIPPLE |
| MS27068 Revision D:2013 | Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut |
| MS27390 Revision C:2013 | Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut |
| MS27058 Revision E:2013 | Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose |
| MS27384 Revision C:2014 | ADAPTOR ASSEMBLY, FLARELESS, 45 DEGREES FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT |
| MS27065 Revision F:2013 | Elbow Subassembly, Flared, 90 Degrees, Swivel Nut |
| MS27062 Revision D:2013 | Nipple Subassembly, Straight, Swivel Flange |
| SAE AS85720B | Fittings, Tube, Fluid Systems, Separable, High Pressure Beam Seal, 5000/8000 psi, General Specification For |
| SAE AS 4417A : 2014 | NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION |
| SAE AS4726A | Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification |
| MS27070 Revision E:2013 | SLEEVE, HOSE COUPLING |
| MS27391 Revision F:2013 | Nipple, Flareless, Tube to Hose - Swivel Nut |
| SAE ARP5824 | Recommended Solid Film Lubricants for Fluid System Components |
| MS27063 Revision F:2013 | Elbow Subassembly, Flared, 45 Degrees, Swivel Nut |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| MS27053 Revision E:2013 | Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut |
| MS27394 Revision C:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| SAE AIR869B | V-Couplings, Including V-Band and V-Retainer Coupling Assemblies, Flange and Seal Design, Application of |
| SAE AS12500 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies |
| SAE J2271M_201508 | Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) |
| SAE AS4892A | Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For |
| SAE ARP700B | High Strength Elevated Temperature Bolting Practice |
| MS27066 Revision F:2013 | Elbow Subassembly, Swivel Flange, 90 Degrees |
| MS27388 Revision D:2014 | ELBOW SUBASSEMBLY, FLARELESS, 90 DEGREES, SWIVEL NUT |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| MS27386 Revision C:2013 | Nipple Subassembly, Flareless, Straight - with Swivel Nut |
| MS27054 Revision E:2013 | Adapter Assembly, Straight, Swivel Flange to Hose |
| MS27069 Revision H:2017 | SOCKET, HOSE COUPLING |
| MS27059 Revision E:2013 | Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut |
| MS27395 Revision D:2014 | ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT |
| MS27084 Revision D:2014 | ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| SAE J2656_201611 | Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| SAE AS5272F | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| VV-D-1078 Revision B:1983 | DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE) |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| ASTM D 2512 : 2017 | Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023) |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| O-M-232 Revision M:2016 | METHANOL (METHYL ALCOHOL) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.