SAE AS 4723 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR
Hardcopy , PDF
08-08-2020
English
01-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Covers inserts made from A286 alloy of the type identified under the Unified Numbering System as UNS S66286, solid film lubricated with a plastic self locking device, integrated locking keys to positively secure the insert against rotation when properly installed in threaded holes.
| Committee |
E-25
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| SAE AMS5663N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5662N | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50AI - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable |
| ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
| SAE AMSQQA250/4B | Aluminum Alloy 2024, Plate and Sheet |
| MIL-HDBK-57 Revision H:2017 | LISTING OF FASTENER MANUFACTURER'S IDENTIFICATION SYMBOLS |
| SAE AMSQQA250/11 | Aluminum Alloy 6061, Plate and Sheet |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| NASM1312-6:2013 | FASTENER TEST METHODS, METHOD 6, HARDNESS |
| SAE AMS3644G | Plastic: Polyimide For Molded Rod, Bar, and Tube, Plaque, and Formed Parts |
| FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| NASM1312-13 : 2003 | FASTENER TEST METHODS - METHOD 13 - DOUBLE SHEAR TEST |
| SAE AMS QQ A 225/8 : 1998 | ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| FED-STD-H28-20 Revision B:1994 | SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS |
| SAE AS 1310 : 2012 | FASTENER TORQUE FOR THREADED APPLICATIONS, DEFINITIONS OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.