SAE AS 5270 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BOLTS, SCREWS AND STUDS, NICKEL ALLOY, UNS N07718, WORK-STRENGTHENED, TENSILE STRENGTH 220 KSI, PROCUREMENT SPECIFICATION
Hardcopy , PDF
06-08-2020
English
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies bolts, screws and studs made from a work-strengthened corrosion and heat resistant, age Hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.
| Committee |
E-25
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| NASM1312-18:2012 | FASTENER TEST METHODS METHOD 18 ELEVATED TEMPERATURE, TENSILE STRENGTH |
| NASM1312-11:2017 | FASTENER TEST METHODS METHOD 11 TENSION FATIGUE |
| SAE AS 3062 : 2012 | BOLTS, SCREWS AND STUDS - SCREW THREAD REQUIREMENTS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| NASM 14181 : 2004 | BOLT, TENSION, NICKEL ALLOY 718, 220 KSI FTU, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD |
| SAE AS 3659 : 2014 | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| SAE AS 1132 : 2016 | BOLTS, SCREWS AND NUTS - EXTERNAL WRENCHING UNJ THREAD, INCH - DESIGN STANDARD |
| NASM 21296 : 2003 | BOLT, TENSION, STEEL, 260 KSI FTU, 450 DEGREES F, EXTERNAL WRENCHING, SPLINE DRIVE, FLANGED HEAD |
| NASM 1312-8 : 2001 | FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH |
| SAE AS 3658 : 2014 | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| SAE AS 3063 : 2012 | BOLTS, SCREWS AND STUDS, GEOMETRIC CONTROL REQUIREMENTS |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.