SAE AS 5958 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR
Available format(s)
Hardcopy , PDF
Superseded date
10-06-2019
Superseded by
Language(s)
English
Published date
01-01-2017
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Sets up the requirements for axially swaged titanium fittings on titanium, CRES, and aluminum tubing with flareless separable fitting ends for use in hydraulic supply and return aerospace fluid systems up to operating pressure of 5080 psig (35000 kPa) maximum.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AS 5545 : 2010 | NUT COUPLING, FLARELESS, EXTRA FINE THREAD, 5080 PSI |
| SAE AS 6106 : 2014 | FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5971 : 2014 | FITTING ASSEMBLY, ELBOW, 45 DEGREES, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5620 : 2013 | TITANIUM HYDRAULIC TUBING, TI-3AL-2.5V COLD WORKED AND STRESS RELIEVED, UP TO 35000 KPA (5080 PSI), REQUIREMENTS FOR QUALIFICATION TESTING AND CONTROL |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| SAE AS 5868 : 2015 | FITTING ASSEMBLY, STRAIGHT, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| SAE AS 5863 : 2013 | FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| SAE AS 5977 : 2014 | FITTING ASSEMBLY, 90 DEGREES, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 603 : 2015 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| SAE AS 5969 : 2017 | FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5972 : 2017 | FITTING ASSEMBLY, TEE AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| EN 6123:2016 | Aerospace series - Fitting end, 24° internal cone, external thread, flareless type - Extra fine thread pitch - Inch series - Design standard |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AS 5959 : 2013 | AXIALLY SWAGED FITTINGS, INSTALLATION AND INSPECTION PROCEDURE |
| SAE AS 85449/2 : 2013 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| SAE AS 5767 : 2015 | FITTING ASSEMBLY, TEE, FEMALE FLARELESS ON RUN, AXIALLY SWAGED, HYDRAULIC, 5,080 PSI |
| SAE AS1055D | FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS |
| MIL-HDBK-831 Revision A:2013 | PREPARATION OF TEST REPORTS |
| SAE ARP1185B | FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS |
| SAE AS 5791 : 2015 | FITTING ASSEMBLY, STRAIGHT, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS 5805 : 2015 | FITTING ASSEMBLY, ELBOW, 90 DEGREES, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE AS 5807 : 2015 | FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE BRANCH HYDRAULIC, 3000 PSI |
| SAE AS 5793 : 2015 | FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE AMS4965L | TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AS 5869 : 2017 | FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI |
| SAE AS 5810 : 2016 | FITTING ASSEMBLY, TEE, MALE FLARELESS ON THE RUN, AXIALLY SWAGED ON THE RUN AND THE BRANCH, HYDRAULIC, 3000 PSI |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AS 5974 : 2016 | FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5975 : 2015 | FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5804 : 2016 | FITTING ASSEMBLY, TEE, FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, AXIALLY SWAGED ON THE BRANCH, HYDRAULIC, 3,000 PSI |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| SAE AS 5792 : 2015 | FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| SAE AS 5973 : 2014 | FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AMSSTD595A:2017 | COLORS USED IN GOVERNMENT PROCUREMENT |
| SAE AS1376D | ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| EN 2808:1997 | Aerospace series - Anodizing of titanium and titanium alloys |
| SAE AS 6322 : 2016 | FITTING ASSEMBLY, EXTENDED UNION, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5976 : 2015 | FITTING ASSEMBLY, ELBOW, 90 DEGREES, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 6107 : 2014 | FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE AMS 4946 : 2016 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED |
| SAE AS 5808 : 2015 | FITTING ASSEMBLY, TEE FEMALE FLARELESS AND AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3000 PSI |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| SAE AS 5978 : 2014 | FITTING ASSEMBLY, ELBOW 45 DEGREES, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5809 : 2015 | FITTING ASSEMBLY, TEE, FEMALE, FLARELESS AND AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON BRANCH, HYDRAULIC, 3000 PSI |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
| SAE AS 5828 : 2015 | FITTING END, BULKHEAD, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD |
| SAE AMS4083L | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 5802 : 2015 | FITTING ASSEMBLY, ELBOW, 90 DEGREES, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE AS 5827 : 2015 | FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD |
| SAE AS 5979 : 2014 | FITTING ASSEMBLY, ELBOW, 45 DEGREES, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| SAE AS 5864 : 2015 | FITTING END, BULKHEAD, 24 DEGREES CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| SAE AS 5685 : 2015 | STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED |
| SAE AS 85449/3 : 2013 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE |
| SAE ARP 4784 : 2013 | DEFINITIONS AND LIMITS, METAL MATERIAL DEFECTS AND SURFACE AND EDGE FEATURES, FLUID COUPLINGS, FITTINGS AND HOSE ENDS |
| SAE AS 478 : 2015 | IDENTIFICATION MARKING METHODS |
| SAE AS 5801 : 2015 | FITTING ASSEMBLY, 90 DEGREES, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| SAE ARP 5412 : 2013 | AIRCRAFT LIGHTNING ENVIRONMENT AND RELATED TEST WAVEFORMS |
| SAE AS 5806 : 2016 | FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, 3,000 PSI |
| SAE AS 5546 : 2016 | NUT, FITTING, FLARELESS, RETAINED, LIGHTWEIGHT, EXTRA FINE THREAD, UP TO 5080 PSI |
| SAE AS 5803 : 2015 | FITTING ASSEMBLY, ELBOW, 45 DEGREES, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3,000 PSI |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| SAE AMS4928V | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
| SAE AS 5970 : 2014 | FITTING ASSEMBLY, ELBOW, 90 DEGREES, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.