SAE AS683D
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Installation Procedures and Torques for Fluid Connections
Hardcopy , PDF
31-10-2019
English
01-03-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. CONE END CONNECTIONS FOR FLARED TUBE AND BRAZED FERRULE
4. BOSS END CONNECTIONS, POSITIONED TYPE, WITH BACK-UP RING
5. BOSS END CONNECTIONS, POSITIONED TYPE, WITHOUT BACK-UP RING
6. BOSS END CONNECTIONS, NON-POSITIONED TYPE
7. BULKHEAD CONNECTIONS
8. REFERENCE RING SEAL DATA
9. TORQUE VALUES
10. ADAPTERS
11. NOTES
Specifies the following: - Paragraph 3 - Cone end connections for flared tube and brazed ferrule, with and without gasket. - Paragraph 4 - Boss end connections, positioned type, with back-up ring. - Paragraph 5 - Boss end connections, positioned type, without back-up ring. - Paragraph 6 - Boss end connections, non-positioned type. - Paragraph 7 - Bulkhead connections.
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
These procedures cover the following:Paragraph 3 - Cone end connections for flared tube and brazed ferrule, with and without gasket.Paragraph 4 - Boss end connections, positioned type, with back-up ring.Paragraph 5 - Boss end connections, positioned type, without back-up ringParagraph 6 - Boss end connections, non-positioned type.Paragraph 7 - Bulkhead connections.
| SAE AIR5426 | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
| MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
| SAE AS5160A | FITTING, BOLT, FLARED |
| SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS 3578 : 2012 | PACKING, PREFORMED - O-RING SEAL AMS 7271 |
| SAE AS5406D | FITTING, UNION, TUBE, .375 BULKHEAD |
| MS9095 Revision B:2010 | NIPPLE, TUBE - ALUMINUM, BOSS |
| SAE AS9058C | RING - BACK-UP, BOSS CONNECTION, AMS3652, AMS3656, AMS3660, AMS3667 |
| SAE AS567K | Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of |
| NAS1149:2014 | WASHER, FLAT |
| SAE AS930E | FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD |
| SAE ARP573D | Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems |
| SAE AS5176C | FITTING, SLEEVE, FLARED |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| SAE AMSG4343A | Grease, Pneumatic System |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AMS7276H | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems |
| SAE AS5161B | FITTING, BOLT, FLUID PASSAGE |
| SAE AS3208 | PACKING, PREFORMED - AMS 7276 - SEAL |
| SAE AS4395B | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS3551 | PACKING, PREFORMED – O-RING SEAL AMS7272 |
| SAE AS1038G | FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED |
| MS9196 Revision C:2015 | TEE, TUBE - SAE-AMS5646, BOSS |
| SAE AS9385 | PACKING, PREFORMED, AMS7267, O-RING |
| SAE AS1039G | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED |
| MS9195 Revision B:2010 | ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
| SAE AS4330A | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AS33583 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR |
| MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
| SAE AS3282C | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| SAE AS1078A | FITTING END, FLARED TUBE CONNECTION, EXTENDED THREAD, DESIGN STANDARD |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS 9966 : 2012 | PACKING, PREFORMED - AMS 7273, SEAL |
| SAE AS90991C | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024 |
| MS9953 Base Document:1970 | Plug, Machine Thread - Ams 4121, Preformed Packing Mil-S-8879 Thread |
| MS9954 Base Document:1970 | PLUG MACHINE THREAD DRILLED AMS 4121 PREFORMED PACKING MIL-S-8879 THREAD |
| MS9015 Revision B:1974 | PLUG, MACHINE THREADED "O" RING SEAL |
| SAE AS92001B | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM – UNS A92014 |
| MS9483 Revision C:2010 | FERRULE, BRAZING, TUBE FITTING - CRES SAE-AMS5646, STRAIGHT |
| SAE AS 9201 : 2007 | NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700 |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MS9193 Revision A:2010 | NIPPLE, TUBE - SAE-AMS5639, BOSS |
| SAE AS5174E | FITTING, UNION AND REDUCER, FLARED |
| SAE AS91001C | NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400 |
| SAE AS3074D | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| MS9096 Revision B:1972 | Elbow, Tube - AMS 4135, Boss, 90 DEG. |
| MS9197 Revision D:2010 | Nut, Tube Coupling-CRES SAE-AMS5646, Silver Plate |
| MS9097 Revision A:1962 | Elbow, Tube - AMS 4135, Boss, 45 DEG. |
| SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
| SAE AS5175A | NUT, COUPLING, FLARED |
| SAE AS3075E | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| MS9901 Base Document:1970 | PLUG MACHINE THREAD AMS 5646 PREFORMED PACKING MIL-S-8879 THREAD |
| SAE AS1171A | BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.