SAE AS81824D
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Splice, Electric, Crimp, Copper, Environment Resistant
Hardcopy , PDF
01-01-2017
English
13-04-2016
1. SCOPE
2. REFERENCES
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Describes environment resistant, permanent crimp type, splices having heat shrinkable insulating sleeve and meltable environmental seals or heatless sealing sleeves.
DevelopmentNote |
Supersedes MIL S 81824. (09/2008)
|
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
The AS81824 specification covers environment resistant, permanent crimp type, splices having heat shrinkable insulating sleeve and meltable environmental seals or heatless sealing sleeves. The splices may be used with tin, nickel, and silver plated conductors in applications where the total temperature of the splice application does not exceed 200 °C or as specified in the detail specification.
FAA AC 25.1701-1 : 2007 | CERTIFICATION OF ELECTRICAL WIRING INTERCONNECTION SYSTEMS ON TRANSPORT CATEGORY AIRPLANES |
BS EN 16602-70-26:2014 | Space product assurance. Crimping of high-reliability electrical connections |
MIL-HDBK-522 Revision A:2016 | GUIDELINES FOR INSPECTION OF AIRCRAFT ELECTRICAL WIRING INTERCONNECT SYSTEMS |
I.S. EN 16602-70-26:2014 | SPACE PRODUCT ASSURANCE - CRIMPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
SAE AS50881F | Wiring Aerospace Vehicle |
EN 16602-70-26:2014 | Space product assurance - Crimping of high-reliability electrical connections |
SAE AS4461C | Assembly and Soldering Criteria for High Quality/High Reliability Soldering Wire and Cable Termination in Aerospace Vehicles |
SAE AS 81824/6 : 2012 | SPLICE, ELECTRIC, PERMANENT, CRIMP, NICKEL PLATED INSULATED WIRES, ENVIRONMENTAL CLASS 1, 175 DEGREES C |
SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
SAE AS81824/4 | SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, CLASS 1 |
SAE AS81824/8 | SPLICE, IN-LINE, ELECTRIC, CRIMP, NI/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (175 °C), 1 × 3 SEALANT OPENING |
SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
SAE AS81824/3 | SPLICE, COAXIAL CABLE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1 |
ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
SAE AS81824/13 | SPLICE, STUB, ELECTRIC, PERMANENT, CRIMP STYLE, NICKEL/COPPER, INSULATED, ENVIRONMENT RESISTANT, 175 °C MAX |
P-D-410 Revision C:1977 | DISHWASHING COMPOUND, HAND, (SYNTHETIC DETERGENT, SOLID AND LIQUID FORM) |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
SAE AIR1351H | Manufacturers\' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories |
SAE AS 22759/12 : 2015 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED COPPER CONDUCTOR, 600 VOLT, ROHS |
MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
SAE AS 22759/11 : 2015 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED COPPER CONDUCTOR, 600 VOLT, ROHS |
SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
SAE AS 81824/11 : 2011 | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NI/CU, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 200 DEGREES C MAX, 1X1 SEALANT OPENING |
SAE AS81824/5 | SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, KIT, SHIELDED CABLE, CLASS 1 |
SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
SAE AS81824/12A | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, TIN-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 150 °C, HEATLESS SEALING |
SAE AS 81824/7 : 2012 | SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 DEGREES C), 1 X 3 SEALANT OPENING |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
PPP-B-676 Revision E:1992 | BOXES SET-UP |
ASTM B 152/B152M : 2013 : REDLINE | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
SAE AS23053 | Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For |
SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
MIL-PRF-22191 Revision F:2008 | Barrier Materials, Transparent, Flexible, Heat-Sealable |
MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
SAE AS81044A | Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy |
A-A-3174 Base Document:1998 | PLASTIC SHEET, POLYOLEFIN |
SAE AS 81824/9 : 2012 | SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 DEGREES C), 3 X 3 SEALANT OPENING |
MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
SAE AS 81824/10 : 2012 | SPLICE, IN-LINE, ELECTRIC, CRIMP, NI/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (175 DEGREES C), 3 X 3 SEALANT OPENING |
ASTM D 1974/D1974M : 2016 : REDLINE | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
SAE AS81824/14B | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NICKEL-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 175 °C, HEATLESS SEALING |
SAE AS81824/1A | SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 °C), 1 × 1 SEALANT OPENING |
ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.