SAE AS1472A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER
Available format(s)
Hardcopy , PDF
Superseded date
13-04-2020
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
This specification covers three types of lightweight, low pressure, wire and/or fabric reinforced hose assemblies primarily for use in aircraft potable water systems.
| Committee |
G-3
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AS4468G | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| SAE AMS5689F | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS5645S | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| QQ-P-35 Revision C:1988 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| QQ-A-225 Revision G:1990 | ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, OR SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED, GENERAL SPECIFICATION FOR |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| SAE AS 1483 : 2014 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT |
| SAE AMS 4120 : 2002 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| MIL I 6866 : B | INSPECTION, PENETRANT METHOD OF |
| SAE AMS5571J | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AS1474B | HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO 45 DEGREES |
| SAE AMS5697F | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS5690M | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS4112D | Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| SAE AMS5648M | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| NAS1367:2012 | FITTINGS, COATED, LUBRICANT & SEALANT |
| SAE ARP908C | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
| MS33656 Revision J:1987 | FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL |
| SAE AS1476B | HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, 45 DEGREES TO 45 DEGREES |
| SAE AS1475B | HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO 90 DEGREES |
| SAE AMS5567F | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AS 1487 : 2013 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 90° |
| MIL R 5031 : B | ROD AND WIRE, WELDING, CORROSION AND HEAT RESISTING ALLOYS |
| SAE AMS5637H | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5646P | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS5688L | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
| SAE AS 1488 : 2013 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 90° TO 90° |
| SAE AS1478B | HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, 90° TO 90°(NONCURRENT Oct 1994) |
| SAE AMS5575P | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| MIL-B-7883 Revision B:1968 | BRAZING OF STEELS, COPPER, COPPER ALLOYS, NICKEL ALLOYS, ALUMINUM AND ALUMINUM ALLOYS |
| MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
| SAE AMS5570Q | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS4117K | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS5685L | STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED, COLD FINISHED |
| SAE AMS4772K | SILVER ALLOY, BRAZING FILLER METAL, 54AG - 40CU - 5.0ZN - 1.0NI, 1325 TO 1575 DEGREES F (718 TO 857 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
| MIL-W-8611 Revision A:1957 | WELDING, METAL ARC AND GAS STEELS AND CORROSION AND HEAT RESISTANT ALLOYS PROCESS FOR |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| SAE AMS5639J | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS4778K | NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 1800 TO 1900 DEGREES F SOLIDUS-LIQUIDUS RANGE |
| MIL-C-5501 Revision G:1989 | CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| MS33514 Revision G:1990 | FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL (ASG) |
| SAE AMS5636F | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| MS21921 Revision H:1981 | NUT SLEEVE COUPLING FLARELESS |
| SAE AS 1473 : 1994 | HOSE ASSEMBLY, FLEXIBLE, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT |
| SAE AS 1484 : 2014 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO 45 DEGREES |
| SAE AS 1485 : 2014 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, STRAIGHT TO 90 DEGREES |
| SAE AMS5556J | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS5557J | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
| SAE AS 1486 : 2013 | HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45 DEGREE TO 45 DEGREE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.