SAE AS4842A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fittings and Bosses, Pipe Threaded, Fluid Connection
Hardcopy , PDF
06-04-2021
English
06-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
APPENDIX A
Sets up the requirements for pipe threaded fluid connection fittings for use in all types of fluid systems.
| DevelopmentNote |
Supersedes AN 933 and MS 27769. (05/2002)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Aerospace Standard (AS) establishes the requirements for pipe threaded fluid connection fittings (see Section 6) for use in all types of fluid systems.
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| AN911 Revision 10:2011 | NIPPLE, PIPE |
| AN912 Revision 10:2011 | BUSHING, PIPE |
| AN916 Revision 11:2011 | ELBOW, PIPE, INTERNAL THREAD. 90 DEGREES |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
| SAE AS4842/1A | Fittings, 37° Flared to Pipe Threaded, Fluid Connection |
| NASA SSTD 8070 0126 : 2014 | TUBING SYSTEMS FOR FACILITY SYSTEMS, SPECIAL TEST EQUIPMENT, AND AEROSPACE HARDWARE |
| AN910 Revision 11:2011 | COUPLING, PIPE |
| AN917 Revision 9:2011 | TEE, PIPE |
| SAE AS4843/2A | Fittings, Beaded to Pipe Threaded, Fluid Connection |
| SAE AS4842/2A | Fittings, Flareless to Pipe Threaded, Fluid Connection |
| AN918 Revision 9:2011 | CROSS, PIPE |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMSQQA225/9A | Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
| MIL-PRF-6083 Revision G:2013 | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| ASTM B 154 : 2016 : REDLINE | Standard Test Method for Mercurous Nitrate Test for Copper Alloys |
| SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
| SAE AMS2770M | Heat Treatment of Wrought Aluminum Alloy Parts |
| SAE AMS6382P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed |
| SAE AMS4141G | Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated |
| SAE AMS2759E | Heat Treatment of Steel Parts General Requirements |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS5648M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AMS4134F | Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated |
| SAE AMSQQA367D | Aluminum Alloy Forgings |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AMS5646P | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated |
| SAE AMS2772G | Heat Treatment of Aluminum Alloy Raw Materials |
| SAE AS5201 | FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
| A-A-59133 Revision B:2010 | CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER |
| SAE AS1376D | ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD |
| SAE AS71051B | Pipe Threads, Taper, Aeronautical National Form, Symbol ANPT - Design and Inspection Standard |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS2472G | Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| SAE AMS4610N | Brass, Free-Cutting Bars and Rods 61.5Cu - 35Zn - 3.1Pb Half Hard (H02) |
| SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| SAE AMS4339A | Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged |
| SAE ARP4784A | Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings and Hose Ends |
| SAE AS478N | Identification Marking Methods |
| SAE AMS2658D | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts |
| SAE ARP9013 | Statistical Product Acceptance Requirements |
| SAE AMS4124E | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged |
| SAE AS5200 | PORT OR FITTING END, INTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.