SAE AS683D
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Installation Procedures and Torques for Fluid Connections
Hardcopy , PDF
English
01-03-2012
31-10-2019
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. CONE END CONNECTIONS FOR FLARED TUBE AND BRAZED FERRULE
4. BOSS END CONNECTIONS, POSITIONED TYPE, WITH BACK-UP RING
5. BOSS END CONNECTIONS, POSITIONED TYPE, WITHOUT BACK-UP RING
6. BOSS END CONNECTIONS, NON-POSITIONED TYPE
7. BULKHEAD CONNECTIONS
8. REFERENCE RING SEAL DATA
9. TORQUE VALUES
10. ADAPTERS
11. NOTES
Specifies the following: - Paragraph 3 - Cone end connections for flared tube and brazed ferrule, with and without gasket. - Paragraph 4 - Boss end connections, positioned type, with back-up ring. - Paragraph 5 - Boss end connections, positioned type, without back-up ring. - Paragraph 6 - Boss end connections, non-positioned type. - Paragraph 7 - Bulkhead connections.
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
These procedures cover the following:Paragraph 3 - Cone end connections for flared tube and brazed ferrule, with and without gasket.Paragraph 4 - Boss end connections, positioned type, with back-up ring.Paragraph 5 - Boss end connections, positioned type, without back-up ringParagraph 6 - Boss end connections, non-positioned type.Paragraph 7 - Bulkhead connections.
| SAE AIR5426 | Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of |
| SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
| MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
| SAE AS5160A | FITTING, BOLT, FLARED |
| SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS5406D | FITTING, UNION, TUBE, .375 BULKHEAD |
| MS9095 Revision B:2010 | Nipple, Tube - Aluminum, Boss |
| SAE AS9058C | RING - BACK-UP, BOSS CONNECTION, AMS3652, AMS3656, AMS3660, AMS3667 |
| SAE AS567K | Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of |
| SAE AS930E | FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD |
| SAE ARP573D | Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems |
| SAE AS5176C | FITTING, SLEEVE, FLARED |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| SAE AMSG4343A | Grease, Pneumatic System |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| SAE AMS7276H | Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals In Fuel Systems and Specific Engine Oil Systems |
| SAE AS5161B | FITTING, BOLT, FLUID PASSAGE |
| SAE AS3208 | PACKING, PREFORMED - AMS 7276 - SEAL |
| SAE AS4395B | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
| SAE AS3551 | PACKING, PREFORMED – O-RING SEAL AMS7272 |
| SAE AS1038G | FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARED |
| MS9196 Revision C:2015 | Tee, Tube - SAE-AMS5646, Boss |
| SAE AS9385 | PACKING, PREFORMED, AMS7267, O-RING |
| SAE AS1039G | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED |
| MS9195 Revision B:2010 | Elbow, Tube - SAE-AMS5639, Boss, 45 Degrees |
| SAE AS4330A | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| SAE AS33583 | TUBING END DOUBLE FLARE, STANDARD DIMENSIONS FOR |
| MS9198 Revision D:2010 | Nut, Tube Coupling-CRES SAE-AMS5646 |
| SAE AS3282C | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| SAE AS1078A | FITTING END, FLARED TUBE CONNECTION, EXTENDED THREAD, DESIGN STANDARD |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS90991C | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM - UNS A92024 |
| MS9953 Base Document:1970 | Plug, Machine Thread - Ams 4121, Preformed Packing Mil-S-8879 Thread |
| MS9954 Base Document:1970 | Plug, Aluminum, Machine Thread-Drilled, Preformed Packing |
| MS9015 Revision B:1974 | Plug, Machine Threaded - \"O\" Ring Seal |
| SAE AS92001B | NUT, HEXAGON, DRILLED, BOSS CONNECTION, ALUMINUM – UNS A92014 |
| MS9483 Revision C:2010 | Ferrule, Brazing, Tube Fitting-Cres SAE-AMS5646, Straight |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| MS9193 Revision A:2010 | Nipple, Tube - SAE-AMS5639, Boss |
| SAE AS5174E | FITTING, UNION AND REDUCER, FLARED |
| SAE AS91001C | NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400 |
| SAE AS3074D | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| MS9096 Revision B:1972 | Elbow, Tube - AMS 4135, Boss, 90 DEG. |
| MS9197 Revision D:2010 | Nut, Tube Coupling-CRES SAE-AMS5646, Silver Plate |
| MS9097 Revision A:1962 | Elbow, Tube - AMS 4135, Boss, 45 DEG. (No S/S Document) |
| SAE AS5175A | NUT, COUPLING, FLARED |
| SAE AS3075E | GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS5553 |
| MS9901 Base Document:1970 | Plug, Machine Thread - AMS 5646, Preformed Packing, MIL-S-8879 Thread |
| SAE AS1171A | BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.